Suhanov D.A. et al. 2017 no. 4(77)

ОБРАБОТКА МЕТАЛЛОВ № 4 (77) 2017 54 МАТЕРИАЛОВЕДЕНИЕ 3. Bochvar A.A. Metallovedenie [Metal science]. Moscow, Metallurgizdat Publ., 1956. 495 p. 4. Bunin K.N. Otbelennyi chugun [Bleached cast iron]. Moscow, Metallurgizdat Publ., 1947. 90 p. 5. Bogachev I.N. Metallografiya chuguna [Metallography of cast iron]. Moscow, Mashgiz Publ., 1952. 367 p. 6. Nizhnikovskaya P.F. Struktura i plastichnost’ zhelezouglerodistykh splavov evtekticheskogo tipa [Structure and plasticity of iron-carbon alloys of eutectic type]. Metallovedenie i termicheskaya obrabotka metallov = Metal Science and Heat Treatment , 1984, no. 9, pp. 5–9. (In Russian). 7. Chernov D.K. Izbrannye trudy po metallurgii i metallovedeniyu [Selected works by metallurgy and metal science]. Ed. by V.D. Sadovskii. Moscow, Nauka Publ., 1983. 447 p. 8. Gaev I.S. Bulat i sovremennye zhelezouglerodistye splavy [Damascus steel and modern iron-carbon alloys]. Metallovedenie i termicheskaya obrabotka metallov = Metal Science and Heat Treatment , 1965, no. 9, pp. 17–24. (In Russian). 9. Schastlivtsev V.M., Urtsev V.N., Shmakov A.V., Degtyarev V.N., Nakonechnyi A.Ya., Mokshin E.D., Yakovleva I.L. Structure of bulat. The Physics of Metals and Metallography , 2013, vol. 114, iss. 7, pp. 596–603. doi: 10.1134/S0031918X13070107. 10. Verhoeven J.D. Damascus steel, Part 1: Indian wootz steel. Metallograhpy , 1987, vol. 20, iss. 2, pp. 145–151. doi: 10.1016/0026-0800(87)90026-7. 11. Verhoeven J.D., Peterson D.T. What is a Damascus steel? Materials Characterization , 1992, vol. 29, iss. 3, pp. 335–341. 12. Khmara L., Serko A. Instrument iz bulatnoi stali [Tool made of bulat steel]. Tehnika i nauka = Technology and Science , 1977, no. 7, pp. 7–9. 13. Verhoeven J.D., Pendray A.H., Gibson E.D. Wootz Damascus steel blades. Materials Characterization, 1996, vol. 37, iss. 1, pp. 9–22. doi: 10.1016/S1044-5803(96)00019-8. 14. Wadsworth J., Sherby O.D. Response toVerhoeven comments on Damascus steel. Materials Characterization, 2001, vol. 47, iss. 2, pp. 163–165. doi: 10.1016/S1044-5803(01)00184-X. 15. Zykova A.P., Kurzina I.A., Novomeiskii M.Yu., Knyazev A.S., Nikulina A.A. Strukturno fazovoe sostoyanie Fe-soderzhashchikh splavov, modifitsirovannykh ul’tra- i nanodispersnymi poroshkami oksidov d-metallov [Structural-phase composition of the Fe-contained alloyed, modified with ultra- and nanodispersed powders of d-metals oxides]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2012, no. 4 (57), pp. 72–78. 16. Wadsworth J. Atcheometallurgy related to swords. Materials Characterization , 2015, vol. 99, pp. 1–7. doi: 10.1016/j.matchar.2014.10.019. 17. Sukhanov D.A., Arkhangelskii L.B. Damascus steel microstructure. Metallurgist , 2016, vol. 59, iss. 9–10, pp. 818–822. doi: 10.1007/s11015-016-0178-x. 18. Sukhanov D.A., Arhangelskiy L.B., Plotnikova N.V. Morfologiya izbytochnoi karbidnoi fazy v vysokouglerodistykh splavakh tipa bulat [The morphology of the carbides in high-carbon alloys such as damascus steel]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2016, no. 4 (73), pp. 43–51. doi: 10.17212/1994-6309-2016-4-43-51. 19. Sukhanov D.A, Plotnikova N.V. Wootz: cast iron or steel? Materials Sciences and Applications , 2016, vol. 7, iss. 11, pp. 792–802. doi: 10.4236/msa.2016.711061. 20. Sukhanov D.A., Arhangelskii L.B., Plotnikova N.V. Priroda uglovatykh karbidov v bulatnoi stali [Nature of angular carbides in damascus steel]. Metallurg = Metallurgist , 2017, no. 1, pp. 64–69. Conflicts of Interest The authors declare no conflict of interest. © 2017 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY li- cense (http://creativecommons.org/licenses/by/4.0/ ).

RkJQdWJsaXNoZXIy MTk0ODM1