Kudryashov E.A. et al. 2018 Vol. 20 No. 1

OBRABOTKAMETALLOV Vol. 20 No. 1 2018 43 EQUIPMENT. INSTRUMENTS 7. Kudryashov E.A., Altukhov A.Yu., Lunin D.Yu., Fomichev E.N. Tekhnologicheskie preimushchestva instrumental’nogo materiala kompozit pri obrabotke konstruktivno slozhnykh poverkhnostei detalei [Technological advantages of the CBN tool when machining structurally complex parts surfaces]. Izvestiya Volgogradskogo gosudarstvennogo tekhnicheskogo universiteta = Izvestia of Volgograd State Technical University , 2010, no. 12 (72), pp. 15–20. 8. Pavlov E.V., Smirnov I.M. O vozmozhnosti primeneniya reztsov iz kompozita pri obrabotke poverkhnostei detalei, obrazovannykh sochetaniem konstruk-tsionnykh materialov [Applicability of composite cutters for mashining surfaces formed by a combination of structural materials]. Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta. Seriya Tekhnika i tekhnologii = Proceedings of the South-West State University. Technics and Technologies , 2017, no. 2 (71), pp. 91–98. 9. Ni S.Y., Li Y., Deng S.X. Study on machining mechanism of internal whirling process for precise external thread and its tool profile design. Journal of Mechanical Engineering , 2012, vol. 48, no. 7, pp. 193–198. doi: 10.3901/ JME.2012.07.193. 10. Zhu H.Y., Li Y. Study on macro-morphology of hard whirling chips with PCBN tools. Manufacturing Technology & Machine Tool , 2011, vol. 9, pp. 101–104. 11. Zhu H.Y., Li Y. Study on macro-morphology of hard whirling chips with PCBN cutting tools coated with chromium aluminum nitride. Modular Machine Tool & Automatic Manufacturing Technique , 2011, vol. 11, pp. 99–101. 12. Solodkov V.A., Tibirkova M.A. Vliyanie uslovii vykhoda na rabotospo-sobnost’ tverdosplavnogo instrumenta pri preryvistom rezanii [Effect of output conditions on the performance of a carbide tool with intermittent cutting]. Izvestiya Volgogradskogo gosudarstvennogo tekhnicheskogo universiteta = Izvestia of Volgograd State Technical University , 2010, no. 12 (72), pp. 62–65. 13. Wang Y., Li L., Zhou C., Guo Q., Zhang C., Feng H. The dynamic modeling and vibration analysis of the large-scale thread whirling system under high-speed hard cutting. Machining Science and Technology , 2014, vol. 18, iss. 4, pp. 522–546. doi: 10.1080/10910344. 2014.955366. 14. Yang Y., Li J.F. Study on mechanism of chip formation during high-speed milling of alloy cast iron. The International Journal of Advanced Manufacturing Technology , 2010, vol. 46, pp. 43–50. doi: 10.1007/s00170-009- 2064-1. 15. Mohan L.V., Shunmugam M.S. Simulation of whirling process and tool profiling for machining of worms. Journal of Materials Processing Technology , 2007, vol. 185, pp. 191–197. doi: 10.1016/j.jmatprotec.2006.03.115. 16. Petrenko V.N., Gvozdetskii A.P., Kolesnikov S.I. Sposob obrabotki preryvistykh poverkhnostei rezaniem [Method for processing discontinuous surfaces by cutting]. Inventor’s Certificate SU, no. 1641509, 1991. 17. Kudryashov E.A., Kameneva T.E. Sposob obrabotki vintovykh poverkhnostei rezaniem s udarom [Method of machining screw surfaces by cutting with impact]. Patent RF, no. 2633815, 2017. 18. Kudryashov E.A., Ivanov V.I., Loktiononva O.G., Uchaev P.N. Preimushchestva vysokoeffektivnoi lezviinoi tekhnologii obrabotki detalei instrumentov iz kompozita [Advantages of high-efficiency blade technology for machining with CBN tools]. Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta. Seriya Tekhnika i tekhnologii = Proceedings of the South-West State University. Technics and Technologies , 2011, no. 5-1 (38), pp. 103–106. 19. Yulin W., Tao L., Guo Q., Feng H. Study on the forming process of thread raceway surface under the hard whirling. Proceedings of the 8th International Conference on Computer Science & Education (ICCSE 2013) , 26–28 April 2013, Colombo, Sri Lanka, pp. 627–632. doi: 10.1109/ ICCSE.2013.6553985. 20. Yatsun E.I., Shvets S.V., Remnev A.I., Pavlov E.V. Resursosberegayushchie sistemy rezaniya s instrumentom iz kompozitnykh materialov [Resource-saving cutting systems with CBN tools]. STIN = Russian Engineering Research , 2013, no. 7, pp. 29–35. (In Russian). Conflicts of Interest The authors declare no conflict of interest. © 2018 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/ ).