Ogneva T.S. et. al. 2018 Vol. 20 No. 2

OBRABOTKAMETALLOV Vol. 20 No. 2 2018 142 MATERIAL SCIENCE 2. Stepanova N.V., Kumar V., Kuznetsov V.A., Popelukh P.A., Golovin E.D. Vliyanie medi na antifriktsionnye svoistva serykh chugunov [Effect of copper addition on friction properties of gray cast iron]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2012, no. 1 (54), pp. 81–84. 3. Stepanova N.V., BataevA.A., SitnikovA.A., Oskolkova T.N. Iznosostoikost’ zaevtektoidnoi stali, legirovannoi med’yu i alyuminiem [Wear resistance of hypereutectoid steel, alloy with copper and aluminum]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2015, no. 4 (69), pp. 72–79. doi: 10.17212/1994-6309-2015-4-72-79. 4. Sil’man G.I. About retrograde solidus and stratification of melt in the Fe–Cu and Fe–Cu–C systems. Metal Science and Heat Treatment , 2009, vol. 51, iss. 1–2, pp. 19–24. doi: 10.1007/s11041-009-9120-1. 5. Bataev I.A., Stepanova N.V., Bataev A.A., Nikulina A.A., Razumakov A.A. Peculiarities of the precipitation of nanosized ε-phase copper particles in ferrite plates of lamellar pearlite. Physics of Metals and Metallography , 2016, vol. 117, iss. 9, pp. 901–905. doi: 10.1134/S0031918X16090015. 6. Stepanova N.V., Bataev I.A., Kang Y.-B., Lazurenko D.V., Bataev A.A., Razumakov A.A., Jorge Junior A.M. Composites of copper and cast iron fabricated via the liquid: In the vicinity of the limits of strength in a non-deformed condition. Materials Characterization , 2017, vol. 130, pp. 260–269. doi: 10.1016/j.matchar.2017.06.025. 7. Prasetyo Y., Lee S.K., Baek E.R. Effect of copper addition on mechanical properties of nodular indefinite chilled iron (NICI). Key Engineering Materials , 2011, vol. 457, pp. 386–391. doi: 10.4028/www.scientific.net/ KEM.457.386. 8. Tsujikawa M., Matsumoto N., Nakamoto K., Michiura Y. Pearlite stabilization by copper on ductile cast iron. Key Engineering Materials , 2011, vol. 457, pp. 151–156. doi: 10.4028/www.scientific.net/KEM.457.151. 9. Hsu C-H., Lin K-T. A study on microstructure and toughness of copper alloyed and austempered ductile irons. Materials Science and Engineering: A , 2011, vol. 528, iss. 18, pp. 5706–5712. doi: 10.1016/j.msea.2011.04.035. 10. Dasgupta R.K., Mondal D.K., Chakrabarti T.K., Ganguli A.C. Microstructure and mechanical properties of as-cast ductile irons alloyed with manganese and copper. Journal of Materials Engineering and Performance , 2012, vol. 21 (8), pp. 1728–1736. doi: 10.1007/s11665-011-0058-2. 11. Abdullah B., Alias S.K., Jaffar A., Rahim F.A., Ramli A. Investigating the mechanical properties of 0.5% cop- per and 0.5% nickel austempered ductile iron with different austempering parameters. Advanced Materials Research , 2012, vol. 383–390, pp. 3313–3319. doi: 10.4028/www.scientific.net/AMR.383-390.3313. 12. Choe K., Lee S., Kim M., Lee K. The effect of Cu on the microstructure and the elevated temperature prop- erties of ferritic heat resistant cast iron. Materials Science Forum , 2010, vol. 654–56, pp. 1448–1451. doi: 10.4028/ www.scientific.net/MSF.654-656.1448. 13. Gorkunov D.N. Tribotekhnika (iznos i bezyznosnost’) [Tribotechnics (wear and wearlessness)]. 4 th ed. Mos- cow, MSKhA Publ., 2000. 616 с. ISBN 5-94327-004-3. 14. Il’in A.P., Nazarenko O.B., Rikhert S.V. Vliyanie suspenzii “motornoe maslo + smes’ nanoporoshkov medi i nikelya” na tribologicheskie svoistva pary treniya “uglerodistaya stal’ – nizkolegirovannaya stal’” [Influence of the suspension “engine oil + mixture of nanopowders of copper and nickel” on the tribological properties of the friction pair “carbon steel-low alloy steel]. Izvestiya Tomskogo politekhnicheskogo universiteta = Bulletin of the Tomsk Poly- technic University , 2004, vol. 307, no. 3, pp. 77–79. 15. Sil’man G.I., Kamynin V.V., Goncharov V.V. Vliyanie medi na strukturu i svoistva vysokoprochnogo chugu- na s sharovidnym grafitom [Influence of copper on structure and properties of high-strength spheroidal graphite cast iron]. Zagotovitel’nye proizvodstva v mashinostroenii = Blanking Productions in Mechanical Engineering , 2010, no. 6, pp. 43–48. 16. Sil’man G.I., Kamynin V.V., Tarasov A.A. Effect of copper on structure formation in cast iron. Metal Science and Heat Treatment , 2003, vol. 45, iss. 7–8, pp. 254–258. doi: 10.1023/A:1027320116132. 17. Kamynin V.V. Effect of structure on the tribotechnical properties of cast iron. Metal Science and Heat Treat- ment , 2007, vol. 49, iss. 7– 8, pp. 398– 400. doi: 10.1007/s11041-007-0074-x. 18. Stepanova, N.V. Razumakov A.A. The effect of doping with copper and aluminium on structure, mechanical and friction properties of steel. The 8 International Forum on Strategic Technologies (IFOST 2013): proceedings , Mongolia, Ulaanbaatar, 28 June – 1 July 2013, vol. 1, pp. 240–242. doi: 10.1109/IFOST.2013.6616977. 19. Yakovlev A.Yu. Volchok I.P. Vliyanie medi na strukturu i svoistva grafitizirovannoi stali [Effect of copper on the structure and properties of graphitized steel]. Metallovedenie i termicheskaya obrabotka metallov = Metal Sci- ence and Heat Treatment , 2008, no. 1, pp. 44–46. (In Russian). 20. Kutateladze S.S., Borishanskii V.M. Spravochnik po teploperedache [Handbook of heat transfer]. Moscow, Gosenergoizdat Publ., 1958. 416 p. ISBN 978-5-458-36211-5.