Burkov A.A. et. al. 2018 Vol. 20 No. 3

OBRABOTKAMETALLOV Vol. 20 No. 3 2018 95 MATERIAL SCIENCE 2. Liu Y.H., Hu J.D., Zhang Y.P., Guo Z.X., Yang Y. Joining of zirconia and Ti6Al4V using a Ti-based amorphous filler. Journal of Materials Science and Technology , 2007, vol. 27, pp. 4983–4993. doi: 10.1016/S1005- 0302(11)60121-7. 3. Wei D.-B., Zhang P.-Z., Yao Z.-J., Wei X.-F., Zhou J.-T., Chen X.-H. Oxidation behaviour of plasma surface alloying on Ti6Al4V alloy. Surface Engineering , 2018, vol. 34, pp. 14–21. doi: 10.1179/1743294415Y.0000000095. 4. Martini C., Ceschini L. A comparative study of the tribological behaviour of PVD coatings on the Ti–6Al–4V alloy. Tribology International , 2011, vol. 44, pp. 297–308. doi: 10.1016/j.triboint.2010.10.031. 5. Du S, Zhang K., Wen M., Qin Y., Li R., Jin H., Bao X., Ren P., Zheng W. Optimizing the tribological behavior of tantalum carbide coating for the bearing in total hip joint replacement. Vacuum , 2018, vol. 150, pp. 222–231. doi: 10.1016/j.vacuum.2018.01.050. 6. Chen T., Liu D., Wu F., Wang H. Effect of CeO 2 on microstructure and wear resistance of TiC bioinert coatings on Ti6Al4V alloy by laser cladding. Materials , 2018, vol. 11, iss. 1, pp. 1–14. doi: 10.3390/ma11010058. 7. Li J., Wang Y., Yao Y., Wang Y., Wang L. Structure and tribological properties of TiSiCN coating on Ti6Al4V by arc ion plating. Thin Solid Films , 2017, vol. 644, pp. 115–119. doi: 10.1016/j.tsf.2017.09.053. 8. Lu X.-L., Liu X.-B., Yu P.-C., Qiao S.-J., Zhai Y.-J., Wang M.-D., Chen Y., Xu D. Synthesis and characteriza- tion of Ni60-hBN high temperature self-lubricating anti-wear composite coatings on Ti6Al4V alloy by laser clad- ding. Optics & Laser Technology , 2016, vol. 78, pp. 87–94. doi: 10.1016/j.optlastec.2015.10.005. 9. Niu R., Li J., Wang Y., Chen J., Xue Q. Structure and tribological behavior of GLCH/nitride coupled coat- ings on Ti6Al4V by nitriding and magnetron sputtering. Diamond & Related Materials , 2016, vol. 64, pp. 70–79. doi: 10.1016/j.diamond.2016.01.015. 10. Qin Y.K., Xiong D.S., Li J.L., Tyagi R. Compositions and tribological properties of PEO coatings on Ti6Al4V alloy. Surface Engineering , 2017, vol. 33, pp. 895–902. doi: 10.1179/1743294414Y.0000000412. 11. AnandA., Das M., Kundu B., Balla V.K., Bodhak S., Gangadharan S. Plasma-sprayed Ti6Al4V alloy compos- ite coatings reinforced with in situ formed TiB-TiN. Journal of Thermal Spray Technology , 2017, vol. 26, pp. 2013– 2019. doi: 10.1007/s11666-017-0651-5. 12. Li X., Dong C., Zhao Q., Pang Y., Cheng F., Wang S. Characterization of microstructure and wear resistance of PEO coatings containing various microparticles on Ti6Al4V alloy. Journal of Materials Engineering and Perfor- mance , 2018, vol. 27, pp. 1642–1653. doi: 10.1007/s11665-018-3249-2. 13. Tao Y.-F., Li J., Lv Y.-H., Hu L.-F. Effect of heat treatment on residual stress and wear behaviors of the TiNi/Ti2Ni based laser cladding composite coatings. Optics and Laser Technology , 2017, vol. 97, pp. 379–389. doi: 10.1016/j.optlastec.2017.07.029. 14. Li J.-L., Cai G.-Y., Zhong H.-S., Wang Y.-X., Chen J.-M. Tribological properties in seawater for Ti/TiCN coatings on Ti6Al4V alloy by arc ion plating with different carbon contents. Rare Metals , 2016, vol. 36, pp. 858–864. doi: 10.1007/s12598-016-0802-8. 15. Cai C., Song B., Wie Q., Xue P., Wen S., Liu J., Shi Y. In-situ integrated fabrication of Ti–Ni coating during hot isostatic pressing of Ti6Al4V parts: Microstructure and tribological behavior. Surface and Coatings Technology , 2015, vol. 280, pp. 194–200. doi: 10.1016/j.surfcoat.2015.09.007. 16. Wang J., Ma Y., Guan J., Zhang D. Characterizations of anodic oxide films formed on Ti6Al4V in the silicate electrolyte with sodium polyacrylate as an additive. Surface and Coatings Technology , 2018, vol. 338, pp. 14–21. doi: 10.1016/j.surfcoat.2018.01.076. 17. Avelar-Batista J.C., Spain E., Housden J., Matthews A., Fuentes G.G. Plasma nitriding of Ti6Al4V alloy and AISIM2 steel substrates using D.C. glow discharges under a triode configuration. Surface and Coatings Technology , 2005, vol. 200, pp. 1954–1961. doi: 10.1016/j.surfcoat.2005.08.037. 18. Hao Y.J., Liu J.X., Li J.C., Li S.K., Zou Q.H., Chen X.W. Rapid preparation of TiC reinforced Ti6Al4V based composites by carburizing method through spark plasma sintering technique. Materials & Design , 2015, vol. 65, pp. 94–97. doi: 10.1016/j.matdes.2014.09.008. 19. Chang Z.K., Wan X.S., Pei Z.L., Gong J., Sun C. Influence of different plasma nitriding treatments on the wear and crack behavior of forging tools evaluated by Rockwell indentation and scratch tests. Surface and Coatings Technology , 2011, vol. 205, pp. 4690–4696. doi: 10.1016/j.surfcoat.2010.07.053. 20. Viteri V.S., Barandika M.G., Gopegui U.R., Bayón R., Zubizarreta C., Fernández X., Igartua A. Character- ization of Ti–C–N coatings deposited on Ti6Al4V for biomedical applications. Journal of Inorganic Biochemistry , 2012, vol. 117, pp. 359–366. doi: 10.1016/j.jinorgbio.2012.09.012. 21. Sitek R., Kaminski J., Borysiuk J., Matysiak H., Kubiak K., Kurzydlowski K.J. Microstructure and properties of titanium aluminides on Ti6Al4V titanium alloy produced by chemical vapor deposition method. Intermetallics , 2013, vol. 36, pp. 36–44. doi: 10.1016/j.intermet.2012.12.017.