Dyčková L. et. al. 2018 Vol. 20 No. 3

OBRABOTKAMETALLOV Vol. 20 No. 3 2018 121 MATERIAL SCIENCE References 1. Neikov O., Naboychenko S., Murashov I.B., YefimovA., Dowson G. Handbook of Non-ferrous metal powders: technologies and applications. Amsterdam, Elsevier Science, 2009, pp. 464–470. 2. Dean J.A. Lange’s handbook of chemistry . New York, McGraw-Hill Professional, 1998. 3. Davis J.R., ed. ASM speciality handbook. Heat resistant materials. Materials Park, Ohio, ASM International, 1997, pp. 361–364. 4. Ohser-Wiedemann R., Martin U., Seifert H.J., Müller A. Densification behavior of pure molybdenum powder by spark plasma sintering. International Journal of Refractory Metals and Hard Materials , 2010, vol. 28. iss. 4. pp. 550–557. doi: 10.1016/j.ijrmhm.2010.03.003. 5. KimY., Lee S., Noh J.-W., Lee S.H., Jeong I.-D., Park S.-J. Rheological and sintering behaviors of nanostructured molybdenum powder. International Journal of Refractory Metals and Hard Materials , 2013, vol. 41, pp. 442–448. doi: 10.1016/j.ijrmhm.2013.06.001. 6. Sheng Y., Guo Z., Hao J. Characterization of spherical molybdenum powders prepared by RF plasma processing. Advanced Materials Research , 2012, vol. 482–484, pp. 2563–2567. doi: 10.4028/www.scientific.net/ AMR.482-484.2563. 7. Liu X.-P., Wang K.-S., Hu P., Chen Q., VolinskyA. Spheroidization of molybdenum powder by radio frequency thermal plasma. International Journal of Minerals, Metallurgy and Materials , 2015, vol. 22, iss. 11, pp. 1212–1218. doi: 10.1007/s12613-015-1187-7. 8. Garg P., Park S.-J., German R.M. Effect of die compaction pressure on densification behavior of molybdenum powders. International Journal of Refractory Metals and Hard Materials , 2007, vol. 25, iss. 1, pp. 16–24. doi: 10.1016/j.jrmhm.2005.10.014. 9. Leitner K., Felfer P.J., Holec D., Cairney J., Knabl W., Lorich A., Clemens H., Primig S. On grain boundary segregation in molybdenum materials. Materials & Design , 2017, vol. 135, pp. 204–212. doi: 10.1016/j. matdes.2017.09.019. 10. An G., Sun J., Liu R.-Z., Li J., Sun Y.-J. Mechanical properties of molybdenum products prepared by using molybdenum powders with different micro-morphologies. Rare Metals , 2015, vol. 34, iss. 4, pp. 276–281. doi: 10.1007/s12598-013-0194-y. 11. Yang Ch., Zhou Y., Liu D., Jiang W., Liu F., Liu Z. Preparation of molybdenum powder from molybdenite concentrate through vacuum decomposition-acid leaching combination process. Rare Metal Technology . Cham, Springer, 2017, pp. 235–246. 12. Bolitschek J., Luidold S., O’Sullivan M. A study of the impact of reduction conditions on molybdenum morphology. International Journal of Refractory Metals and Hard Materials , 2018, vol. 71, pp. 325–329. doi: 10.1016/j.ijrmhm.2017.11.037. 13. Kim Y., Lee S., Noh J.-W., Lee S.H., Jeong I.-D., Park S.-J. Rheological and sintering behaviors of nanostructured molybdenum powder. International Journal of Refractory Metals and Hard Materials , 2013, vol. 41, pp. 442–448. doi: 10.1016/j.ijrmhm.2013.06.001. 14. Wang D., Yu Ch., Ma J., Liu W., Shen Z. Densification and crack suppression in selective laser melting of pure molybdenum. Materials and Design , 2017, vol. 129. pp. 44–52. doi: 10.1016/j.matdes.2017.04.094. 15. Ghayour H., Abdellhi M., Bahmanpour M. Optimization of the high energy ball-milling: modeling and parametric study. Powder Technology , 2016, vol. 291, pp. 7–13. doi: 10.1016/j.powtec.2015.12.004. 16. LiuM., Zhong X.,Wang J., Liu Z., QuiW., Zeng D. Microstructure and thermal stability of MoSi2-CoNiCrAlY nanocomposite feedstock prepared by high energy ball milling. Surface and Coatings Technology , 2014, vol. 239, pp. 78–83. doi: 10.1016/j.surfcoat.2013.11.022. 17. Harris J.R., Wattis J.A.D., Wood J.V. A comparison of different models for mechanical alloying. Acta Materialia , 2001, vol. 49, iss. 19, pp. 3991–4003. doi: 10.1016/S1359-6454(01)00302-0. 18. Karthik B., Gautam G.S., Karthikeyan N.R., Murty B.S. Analysis of mechanical milling in simoloyer: an energy modeling approach. Metallurgical and Materials Transactions A , 2012, vol. 43, iss. 4, pp. 1323–1327. doi: 10.1007/s11661-011-0946-y. 19. Debata M., Acharya T.S., Sengupta P., Acharya P.P., Bajpai S., Jayasankar K. Effect of high energy ball milling on structure and properties of 95W-3.5Ni-1.5Fe heavy alloys. International Journal of Refractory Metals and Hard Materials , 2017, vol. 69, pp. 170–179. doi: 10.1016/j.ijrmhm.2017.08.007. 20. Suryaanarayana C. Mechanical alloying and milling. Progress in Materials Science , 2001, vol. 46, iss. 1–2, pp. 1–184. doi: 10.1016/S0079-6425(99)00010-9.