Savchenko N.L._et.al. 2018 Vol. 20 No. 4

OBRABOTKAMETALLOV Vol. 20 No. 4 2018 69 MATERIAL SCIENCE Materials and Design. – 2018. – Vol. 139. – P. 565–586. – doi: 10.1016/j.matdes.2017.11.021. 11. Basak A., Das S. Epitaxy and microstructure evolution in metal additive manufacturing // Annual ReviewofMaterials Research. – 2016. –Vol. 46. – P. 125– 149. – doi: 10.1146/annurev-matsci-070115-031728. 12. Karimzadeh F., Ebnonnasir A., Foroughi A. Artificial neural network modeling for evaluating of epitaxial growth of Ti6Al4V weldment // Materials Science and Engineering:A. – 2006. –Vol. 432, iss. 1–2. – P. 184–190. – doi: 10.1016/J.MSEA.2006.05.141. 13. Stanford N., Bate P.S. Crystallographic variant selection in Ti–6Al–4V // Acta Materialia. – 2004. – Vol. 52, iss. 17. – P. 5215–5224. – doi: 10.1016/J. ACTAMAT.2004.07.034. 14. Microstructural evolution and mechanical property of Ti-6Al-4V wall deposited by continuous plasma arc additive manufacturing without post heat treatment / J. Lin, Y. Lv, Y. Liu, Z. Sun, K. Wang, Z. Li, Y. Wu, B. Xu // Journal of the Mechanical Behavior of Biomedical Materials. – 2017. – Vol. 69. – P. 19–29. – doi: 10.1016/J.JMBBM.2016.12.015. 15. Roy L. Variation in mechanical behavior due to different build directions of Ti6Al4V fabricated by electron beam: a thesis / The University of Alabama. – Tuscaloosa, 2013. – URL: https://ir.ua.edu/ handle/123456789/1891 (accessed: 07.11.2018). Конфликт интересов Авторы заявляют об отсутствии конфликта интересов.  2018 Авторы. Издательство Новосибирского государственного технического университета. Эта статья доступна по лицензии Creative Commons «Attribution» («Атрибуция») 4.0 Всемирная (https://creativecommons.org/licenses/by/4.0/ ) 16. Baufeld B., Brandl E., Biest O. Wire based additive layer manufacturing: comparison of microstructure and mechanical properties of Ti–6Al– 4V components fabricated by laser-beam deposition and shaped metal deposition // Journal of Materials Processing Technology. – 2011. – Vol. 211. – P. 1146– 1158. – doi: 10.1016/j.jmatprotec.2011.01.018. 17. Intra-layer closed-loop control of build plan during directed energy additive manufacturing of Ti–6Al–4V / A.R. Nassar, J.S. Keist, E.W. Reutzel, T.J. Spurgeon // Additive Manufacturing. – 2015. – Vol. 6. – P. 39–52. – doi: 10.1016/j.addma.2015.03.005. 18. The effects of forced interpass cooling on the material properties of wire arc additively manufactured Ti6Al4V alloy / B. Wu, Z. Pan, D. Ding, D. Cuiuri, H. Li, Z. Fei // Journal of Materials Processing Technology. – 2018. – Vol. 258. – P. 97–105. – doi: 10.1016/j. jmatprotec.2018.03.024. 19. Deformation characteristics of age hardened Ti-6Al-4V / G. Welsch, G. Lütjering, K. Gazioglu, W. Bunk // Metallurgical Transactions A. – 1977. – Vol. 8, iss. 1. – P. 169–177. – doi: 10.1007/BF02677278. 20. Correlation between tensile strength and hardness of electron beam welded TC4-DT joints / W. Lu, Y. Shi, X. Li, Y. Lei // Journal of Materials Engineering and Performance. – 2013. – Vol. 22, iss. 6. – P. 1694–1700. – doi: 10.1007/s11665-012-0469-8.