Titov Yu.V. et. al. 2019 Vol. 21 No. 1

OBRABOTKAMETALLOV Vol. 21 No. 1 2019 24 TECHNOLOGY 17. Ojha K., Garg R.K., Singh K.K. MRR improvement in sinking electrical discharge machining: a review. Journal of Minerals & Materials Characterization & Engineering , 2010, vol. 9, no. 8, pp. 709–739. Available at: http://file.scirp.org/pdf/JMMCE20100800004_52519296.pdf (accessed 01.02.2019). 18. Hsu W.-H., Chien W.-T. Effect of electrical discharge machining on stress concentration in titanium alloy holes. Materials , 2016, vol. 9, iss. 12. doi: 10.3390/ma9120957. 19. Reddy C.B., Reddy G.J., Reddy C.E. Growth of electrical discharge machining and its applications – a review. International Journal of Engineering Research and Development , 2012, vol. 4, iss. 12, pp. 13–22. Available at: http:// www.ijerd.com/paper/vol4-issue12/C04121322.pdf (accessed 01.02.2019). 20. SinghA., Grover N.K., Sharma R. Recent advancement in electric discharge machining, a review. International Journal of Modern Engineering Research , 2012, vol. 2, iss. 5, pp. 3815–3821. Available at: http://www.ijmer.com/ papers/Vol2_Issue5/EN2538153821.pdf (accessed 01.02.2019). 21. Banu A., Ali M.Y. Electrical discharge machining (EDM): a review. International Journal of Engineering Materials and Manufacture , 2016, no. 1 (1), pp. 3–10. doi: 10.26776/ijemm.01.01.2016.02. Conflicts of Interest The authors declare no conflict of interest.  2019 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/ ).