Ivanov A.N. et. al. 2019 Vol. 21 No. 2

ОБРАБОТКА МЕТАЛЛОВ Том 21 № 2 2019 50 ТЕХНОЛОГИЯ 10. Park K. Development and analysis of ultrasonic assisted friction stir welding process: PhD dissertation / University of Michigan. – Ann Arbor, MI, 2009. – 125 р. 11. Amini S., Amiri M.R. Study of ultrasonic vibrations’ effect on friction stir welding // International Journal of Advanced Manufacturing Technology. – 2014. – Vol. 73. – P. 127–135. – DOI: 10.1007/s00170- 014-5806-7. 12. Padhy G.K., Wu C.S., Gao S. Auxiliary energy assisted friction stir welding – status review // Science and Technology of Welding and Joining. – 2015. – Vol. 20 (8). – P. 631–649. – DOI: 10.1179/1362171815Y. 0000000048. 13. Effect of ultrasonic vibration on welding load, macrostructure, and mechanical properties of Al/Mg alloy joints fabricated by friction stir lap welding / S. Kumar, C.S. Wu, S. Zhen, W. Ding // International Journal of Advanced Manufacturing Technology, 2019. – Vol. 100, iss. 5–8. – P. 1787–1799. – DOI: 10.1007/ s00170-018-2717-z. 14. Astudy of the temperature field during ultrasonic- assisted friction-stir welding / L. Ruilin, H. Diqiu, L. Luocheng,Y. Shaoyong,Y. Kunyu // International Journal of Advanced Manufacturing Technology. – 2014. – Vol. 73 (1–4). – P. 321–327. – DOI: 10.1007/ s00170-014-5813-8. 15. Muhammad N.A., Wu C.S., Padhy G.K. Review: Progress and trends in ultrasonic vibration assisted fric- tion stir welding // Journal of Harbin Institute of Tech- nology (New Series). – 2018. – Vol. 25 (3). – P. 16–42. – DOI: 10.11916/j.issn.1005-9113.17105. 16. Liu X.C., Wu C.S. Experimental study on ultra- sonic vibration enhanced friction stir welding // Proceed- ings of the 1st International Joint Symposium on Joining and Welding. – Osaka, Japan, 2013. – P. 151–154. – DOI: 10.1533/978-1-78242-164-1.151. 17. Realization of Al/Mg-Hybrid-Joints by ul- trasound supported friction stir welding – mechani- cal properties, microstructure and corrosion behavior / B. Strass, G. Wagner, C. Conrad, B. Wolter, S. Benfer, W. Fürbeth // Advanced Materials Research. – 2014. – Vol. 966–967. – P. 521–535. – DOI: 10.4028/www.sci- entific.net/AMR.966-967.521. 18. Effect of ultrasonic vibration on the friction stir weld quality of aluminium alloy / X.C. Liu, C.S. Wu, H. Zhang, M. Chen // China Welding (English Edition). – 2013. – Vol. 22 (3). – P. 12–17. 19. Патент 2616313 Российская Федерация. Спо- соб сварки трением с перемешиванием с ультразву- ковым воздействием / Е.А. Колубаев, В.Е. Рубцов, А.Н. Иванов, С.Г. Псахье, С.В. Фортуна, В.А. Бакша- ев, П.А. Васильев. – № 2015153096; заявл. 10.12.15; опубл. 14.04.17, Бюл. № 11. 20. Ultrasonic-assisted laser welding on AISI 321 stainless steel / S.Y. Tarasov, A.V. Vorontsov, S.V. For- tuna, V. E. Rubtsov, V. A. Krasnoveikin, E. A. Kol- ubaev // Welding in the World. – 2019. – Vol. 63, iss. 3. – P. 875–886. – DOI: 10.1007/s40194-019-00716-1. Конфликт интересов Авторы заявляют об отсутствии конфликта интересов.  2019 Авторы. Издательство Новосибирского государственного технического университета. Эта статья доступна по лицензии Creative Commons «Attribution» («Атрибуция») 4.0 Всемирная (https://creativecommons.org/licenses/by/4.0/ )