Skeeba V.Yu. 2019 Vol. 21 No. 2

OBRABOTKAMETALLOV Vol. 21 No. 2 2019 82 EQUIPMENT. INSTRUMENTS 4. Mitsuishi M., Ueda K., Kimura F., eds. Manufacturing systems and technologies for the new frontier : the 41st CIRP Conference on Manufacturing Systems, May 26–28, 2008, Tokyo, Japan. London, Springer, 2008. 556 p. eBook ISBN 978-1-84800-267-8. DOI: 10.1007/978-1-84800-267-8. 5. Skeeba V., Pushnin V., Erohin I., Kornev D. Integration of production steps on a single equipment. Materials and Manufacturing Processes , 2015, vol. 30, iss. 12. DOI: 10.1080/10426914.2014.973595. 6. Lauwers B., Klocke F., KlinkA., TekkayaA.E., Neugebauer R., McintoshD. Hybrid processes inmanufacturing. CIRP Annals – Manufacturing Technology , 2014, vol. 63, iss. 2, pp. 561–583. DOI: 10.1016/j.cirp.2014.05.003. 7. Moriwaki T. Multi-functional machine tool. CIRP Annals – Manufacturing Technology , 2008, vol. 57, iss. 2, pp. 736–749. DOI: 10.1016/j.cirp.2008.09.004. 8. Yamazaki T. Development of a hybrid multi-tasking machine tool: integration of additive manufacturing technology with CNC machining. Procedia CIRP , 2016, vol. 42, pp. 81–86. DOI: 10.1016/j.procir.2016.02.193. 9. Yanyushkin A.S., Lobanov D.V., Arkhipov P.V. Research of influence of electric conditions of the combined electro-diamond machining on quality of grinding of hard alloys. IOP Conference Series: Materials Science and Engineering , 2015, vol. 91, p. 012051. DOI: 10.1088/1757-899X/91/1/012051. 10. Lobanov D.V., Arkhipov P.V., Yanyushkin A.S., Skeeba V.Yu. Research of influence electric conditions com- bined electrodiamond processing by on specific consumption of wheel*. IOP Conference Series: Materials Science and Engineering , 2016, vol. 142, p. 012081. DOI: 10.1088/1757-899X/142/1/012081. 11. Boivie K., Karlsen R., Ystgaard P. The concept of hybrid manufacturing for high performance parts. South African Journal of Industrial Engineering , 2012, vol. 23, iss. 2, pp. 106–115. 12. Berenji K.R., Karagüzel U., Özlü E., Budak E. Effects of turn-milling conditions on chip formation and sur- face finish. CIRP Annals – Manufacturing Technology , 2019. Available at: https://doi.org/10.1016/j.cirp.2019.04.067 (accessed 14.05.2019). 13. Skeeba V.Yu., Ivancivsky V.V., Vakhrushev N.V., Parts K.A., Cha G.O. Efficiency of hybrid equipment com- bining operations of surface hardening by high frequency currents and abrasive grinding. IOP Conference Series: Earth and Environmental Science , 2018, vol. 194, iss. 2, p. 022038. DOI: 10.1088/1755-1315/194/2/022038. 14. Salonitis K., Chondros T., Chryssolouris G. Grinding wheel effect in the grind-hardening process. The Inter- national Journal of Advanced Manufacturing Technology , 2008, vol. 38, iss. 1–2, pp. 48–58. DOI: 10.1007/s00170- 007-1078-9. 15. Ivantsivsky V.V., Skeeba V.Yu. Sovmeshchenie operatsii poverkhnostnoi zakalki i finishnogo shlifovaniya na odnom tekhnologicheskom oborudovanii [Combining the operations of surface hardening and finish grinding on the same processing equipment]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2006, no. 1 (30), pp. 16–18. 16. Skeeba V.Yu., Ivantsivsky V.V. Gibridnoe metalloobrabatyvayushchee oborudovanie: povyshenie effek- tivnosti tekhnologicheskogo protsessa obrabotki detalei pri integratsii poverkhnostnoi zakalki i abrazivnogo shlifo- vaniya [Hybrid metal working equipment: improving the effectiveness of the details processing under the integration of surface quenching and abrasive grinding]. Novosibirsk, NSTU Publ., 2018. 312 p. ISBN 978-5-7782-3690-5. 17. Ding H.T., Shin Y.C. Laser-assisted machining of hardened steel parts with surface integrity analysis. In- ternational Journal of Machine Tools and Manufacture , 2010, vol. 50, iss. 1, pp. 106–114. DOI: 10.1016/j.ijmach- tools.2009.09.001. 18. Yang Y., Gong Y., Qu S., Rong Y., Sun Y., Cai M. Densification, surface morphology, microstructure and me- chanical properties of 316L fabricated by hybrid manufacturing. The International Journal of Advanced Manufactur- ing Technology , 2018, vol. 97, iss. 5–8, pp. 2687–2696. DOI: 10.1007/s00170-018-2144-1. 19. Jeon Y., Lee C.M. Current research trend on laser assisted machining. International Journal of Precision En- gineering and Manufacturing , 2012, vol. 13, iss. 2, pp. 311–317. DOI: 10.1007/s12541-012-0040-4. 20. Ivakhnenko A.G. Povyshenie effektivnosti rannikh stadii proektirovaniya metallorezhushchikh stankov na osnove strukturnogo sinteza formoobrazuyushchikh sistem. Diss. dokt. tekhn. nauk [Improving the efficiency of the early stages of designing machine tools based on the structural synthesis of shaping systems. Dr. eng. sci. diss.]. Moscow, 1998. 244 p. 21. Ivakhnenko A.G., Kuts V.V., Erenkov O.Y., Ivakhnenko E.O., Oleinik A.V. Effectiveness of structural– parametric synthesis of metal-cutting systems. Russian Engineering Research , 2017, vol. 37, no. 10, pp. 901–905. DOI: 10.3103/S1068798X17100112. 22. Nakaminami M., Tokuma T., Moriwaki M., Nakamoto К. Optimal structure design methodology for com- pound multiaxis machine tools–I – Analysis of requirements and specifications. International Journal of Automation Technology , 2007, vol. 1, no. 2, pp. 78–86. DOI: 10.20965/ijat.2007.p0078.