Skorynina P.A. et. al. 2019 Vol. 21 No. 2

OBRABOTKAMETALLOV Vol. 21 No. 2 2019 105 MATERIAL SCIENCE iss. 11–12. – P. 652–655. – DOI: 10.1007/s11041-016- 9937-3. 7. Effect of the conditions of the nanostructuring frictional treatment process on the structural and phase states and the strengthening of metastable austenitic steel / A.V. Makarov, P.A. Skorynina, A.S. Yurovskikh, A.L. Osintseva // Physics of Metals and Metallography. – 2017. – Vol. 118, iss. 12. – P. 1225–1235. – DOI: 10.1134/ S0031918X17120092. 8. Narkevich N.A., Shulepov I.A., Mironov Yu.P. Structure, mechanical, and tribotechnical properties of an austenitic nitrogen steel after frictional treatment // Physics of Metals and Metallography. – 2017. – Vol. 118, iss. 4. – P. 339–406. – DOI: 10.1134/ S0031918X17020090. 9. Microstruсture and mechanical properties of friction stir processed AISI 316L stainless steel / M. Hajian, A. Abdollah-zadeh, S.S. Rezaei-Nejad, H.Assadi, S.M.M.Hadavi,K.Chung,M. Shokouhimehr // Materials and Design. – 2015. – Vol. 67. – P. 82–94. – DOI: 10.1016/j.matdes.2014.10.082. 10. Liang W. Surface modification of AISI 304 austenitic stainless steel by plasma nitriding // Applied Surface Science. – 2003. – Vol. 211. – P. 308–314. – DOI: 10.1016/S0169-4332(03)00260-5. 11. Microstructure and dry sliding wear resistance evaluation of plasma nitride austenitic stainless steel type AISI 316LN against different sliders / A. Deva- raju, A. Elayaperumal, J. Alphonsa, S.V. Kailas, S. Venugopal // Surface and Coatings Technology. – 2012. –Vol. 207. – P. 406–412. – DOI: 10.1016/j. surfcoat.2012.07.031. 12. Gavrilov N.V., Mamaev A.S., Chukin A.V. Nitriding of stainless steel in plasma of a pulse electron beam // Technical Physics Letters. – 2016. – Vol. 42, iss. 5. –P. 491–494. –DOI: 10.1134/S1063785016050096. 13. Gavrilov N.V., Mamaev A.S., Chukin A.V. Nitriding of stainless steel in electron beam plasma in the pulsed and DC generation modes // Journal of Surface Investigation. – 2017. – Vol. 11, iss. 6. – P. 1167–1172. – DOI: 10.1134/S1027451017060076. 14. Cao Y., Ernst F., Michal G.M. Colossal carbon supersaturation in austenitic stainless steels carburized at low temperature // Acta Materialia. – 2003. – Vol. 51. – P. 4171–4181. – DOI: 10.1016/S1359-6454(03)00235-0. 15. Tokaji K., Kohyama K., Masayuki A. Fatigue behaviour and fracture mechanism of a 316 stainless steel hardened by carburizing // International Journal of Fatigue. – 2004. – Vol. 26, iss. 5. – P. 543–551. – DOI: 10.1016/j.ijfatigue.2003.08.024. 16. Carbide precipitation in austenitic stainless steel carburized at low temperature / F. Ernst, Y. Cao, G.M. Michal, A.H. Heuer // Acta Materialia. – 2007. – Vol. 55. – P. 1895–1906. – DOI: 10.1016/j. actamat.2006.09.049. 17. Cheng L.H., Hwang K.S. Surface hardening of powder injection molded 316l stainless steels through low-temperature carburization // Metallurgical and Materials Transactions A. – 2013. – Vol. 44A, iss. 2. – P. 827–834. – DOI: 10.1007/s11661-012-1458-0. 18. Influence of the countermaterial on the dry sliding friction andwear behaviour of low temperature carburized AISI316L steel / L. Ceschini, C. Chiavari, A. Marconi, C. Martini // Tribology International. – 2013. – Vol. 67. – P. 36–43. – DOI: 10.1016/j.triboint.2013.06.013. 19. Structure and wear resistance of 0Cr17Ni14Mo2 austenitic stainless steel after low temperature gas carburising / F. Ma, L. Pan, L.J. Zhang, Y.F. Zhu, P. Li, M. Yang // Materials Research Innovations. – 2014. – Vol. 18. – P. 1023–1027. – DOI: 10.1179/1432891714Z .000000000551. 20. Sun Y. Tribocorrosion behavior of low temperature plasma carburized stainless steel // Surface and Coatings Technology. – 2013. – Vol. 228. – P. S342– S348. – DOI: 10.1016/j.surfcoat.2012.05.105. 21. Surface modification of austenitic steels by low- temperature carburization / I. Ciancaglioni, R. Donnini, S. Kaciulis, A. Mezzi, R. Montanari, N. Ucciardello, G. Verona-Rinati // Surface and Interface Analysis. – 2012. – Vol. 44, iss. 8. – P. 1001–1004. – DOI: 10.1002/ sia.4894. 22. Modification of S phase on austenitic stainless steel using fine particle shot peening / M. Tsujikawa, M. Egawa, T. Sone, N. Ueda, T. Okano, K. Higashi // Surface and Coatings Technology. – 2013. – Vol. 228. – P. S318–S322. – DOI: 10.1016/j.surfcoat.2012.05.111. 23. Sun Y. Kinetics of low temperature plasma carburizing of austenitic stainless steels // Journal of Materials Processing Technology. – 2005. – Vol. 168. – P. 189–94. – DOI: 10.1016/j.jmatprotec.2004.10.005. 24. Carburization of austenitic and ferritic steels in carbon-saturated sodium: preliminary results on the diffusion coefficient of carbon at 873 K / M. Romedenne, F. Rouillard, B. Dupray, D. Hamon, M. Tabarant, D. Monceau // Оxidation of Metals. – 2016. – Vol. 87. – P. 643–653. – DOI: 10.1007/s11085-017-9733-5. 25. Abraha P., Yoshikawa Y., Katayama Y. Surface modification of steel surfaces by electron beam excited plasma processing // Vacuum. – 2009. – Vol. 83, iss. 3. – P. 497–500. – DOI: 10.1016/j.vacuum.2008.04.073. 26. Влияние непрерывного и газоциклического плазменного азотирования на качество нанострук- турированной поверхности аустенитной нержавею- щей стали / А.В. Макаров, Н.В. Гаврилов, Г.В. Са- мойлова, А.С. Мамаев, А.Л . Осинцева, Р.А. Саврай // Обработка металлов (технология, оборудование, инструменты). – 2017. – № 2 (75). – С. 55–66. – DOI: 10.17212/1994-6309-2017-2-55-66. 27. Sun Y., Li X., Bell T. Structural characteristics of low temperature plasma carburised austenitic stainless