Skorynina P.A. et. al. 2019 Vol. 21 No. 2

OBRABOTKAMETALLOV Vol. 21 No. 2 2019 109 MATERIAL SCIENCE 21. Ciancaglioni I., Donnini R., Kaciulis S., Mezzi A., Montanari R., Ucciardello N., Verona-Rinati G. Surface modification of austenitic steels by low-temperature carburization. Surface and Interface Analysis , 2012, vol. 44, iss. 8, pp. 1001–1004. DOI: 10.1002/sia.4894. 22. Tsujikawa M., Egawa M., Sone T., Ueda N., Okano T., Higashi K. Modification of S phase on austenitic stainless steel using fine particle shot peening. Surface and Coatings Technology , 2013, vol. 228, pp. S318–S322. DOI: 10.1016/j.surfcoat.2012.05.111. 23. Sun Y. Kinetics of low temperature plasma carburizing of austenitic stainless steels. Journal of Materials Processing Technology , 2005, vol. 168, pp. 189–194. DOI: 10.1016/j.jmatprotec.2004.10.005. 24. Romedenne M., Rouillard F., Dupray B., Hamon D., Tabarant M., Monceau D. Carburization of austenitic and ferritic steels in carbon-saturated sodium: preliminary results on the diffusion coefficient of carbon at 873 K. Oxidation of Metals , 2016, vol. 87, pp. 643–653. DOI: 10.1007/s11085-017-9733-5. 25. Abraha P., Yoshikawa Y., Katayama Y. Surface modification of steel surfaces by electron beam excited plasma processing. Vacuum , 2009, vol. 83, iss. 3, pp. 497–500. DOI: 10.1016/j.vacuum.2008.04.073. 26. Makarov A.V., Gavrilov N.V., Samoilova G.V., Mamaev A.S., Osintseva A.L., Savrai R.A. Effect of a continuous and gas-cyclic plasma nitriding on the quality of nanostructured austenitic stainless steel. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2017, no. 2 (75), pp. 55– 66. DOI: 10.17212/1994-6309-2017-2-55-66. 27. Sun¢ Y., Li X., Bell T. Structural characteristics of low temperature plasma carburised austenitic stainless steel. Materials science and technology , 1999, vol. 15, iss. 10, pp. 1171–1178. DOI: 10.1179/026708399101505077. 28. Tong X., Zhang T., Ye W. Effect of carburizing atmosphere proportion on low temperature plasma carburizing of austenitic stainless steel. Advanced Materials, Mechanics and Industrial Engineering , 2014, vol. 598, pp. 90–93. DOI: 10.4028/www.scientific.net/AMM.598.90. 29. Menezes M.R., Godoy C., Buono V.T.L., Schvartzman M.M.M., Wilson J.C.A.B. Effect of shot peening and treatment temperature on wear and corrosion resistance of sequentially plasma treated AISI 316L steel. Surface and Coatings Technology , 2017, vol. 309, pp. 651–662. DOI: 10.1016/j.surfcoat.2016.12.037. 30. Borgioli F., Galvanetto E., Bacci T. Influence of surface morphology and roughness on water wetting properties of low temperature nitrided austenitic stainless steels. Materials Characterization , 2014, vol. 95, pp. 278– 284. DOI: 10.1016/j.matchar.2014.07.006. 31. Makarov A.V., Samoilova G.V., Gavrilov N.V., Mamaev A.S., Osintseva A.L., Savrai R.A. Vliyanie predvaritel’noi deformatsionnoi obrabotki na uprochnenie i kachestvo azotirovannoi poverkhnosti austenitnoi nerzhaveyushchei stali. Vektor nauki Tol’yattinskogo gosudarstvennogo universiteta , 2017, no. 4 (42), pp. 67–74. DOI: 10.18323/2073-5073-2017-4-67-74. 32. Bernshtein M.L., Rakhshtadt A.G., eds. Metallovedenie i termicheskaya obrabotka stali . T. 2 [The materials science and heat treatment of steel. Vol. 2]. Moscow, Metallurgiya Publ., 1983. 368 p. 33. Gorelik S.S., Rastorguev L.N., Skakov Yu.A. Rentgenograficheskii i elektronnoopticheskii analiz [X-ray and electronoptical analysis]. Moscow, Metallurgizdat Publ., 1970. 366 p. 34. Makarov A.V., Skorynina P.A., Volkova E.G., Osintseva A.L. Effect of heating on the structure, phase composition and micromechanical properties of the metastable austenitic steel strengthened by nanostructuring frictional treatment. The Physics of Metals and Metallography , 2018, vol. 119, iss. 12, pp. 1196–1203. DOI: 10.1134/ S0031918X18120116. 35. Menthe E., Bulak A., Olfe J., Zimmermann A., Rie K.T. Improvement of the mechanical properties of austenitic stainless steel after plasma nitriding. Surface and Coatings Technology , 2000, vol. 133–134, pp. 259–263. DOI: 10.1016/S0257-8972(00)00930-0. 36. Duarte M.C.S., Godoya C., Wilson J.C.A.B. Analysis of sliding wear tests of plasma processed AISI 316L steel. Surface and Coatings Technology , 2014, vol. 260, pp. 316–325. DOI: 10.1016/j.surfcoat.2014.07.094. 37. Makarov A.V., Samoilova G.V., Gavrilov N.V., Mamayev A.S., Osintseva A.L., Kurennykh T.E., Savrai R.A. Effect of preliminary nanostructuring frictional treatment on the efficiency of nitriding of metastable austenitic steel in electron beam plasma. AIP Conference Proceedings , 2017, vol. 1915, pp. 030011-1–030011-5. DOI: 10.1063/1.5017331. Conflicts of Interest The authors declare no conflict of interest. © 2019 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/ ).