Klochkov N.S. et. al. 2019 Vol. 21 No. 2

OBRABOTKAMETALLOV Vol. 21 No. 2 2019 153 MATERIAL SCIENCE 2. Il’in A.I. Povyshenie iznosostoikosti i ustalostnoi prochnosti nekotorykh antifriktsionnykh splavov [The increased wear resistance and fatigue strength of some antifriction alloys]. Issledovanie splavov tsvetnykh metallov [Research of alloys of non-ferrous metals]. Moscow, AN SSSR Publ., 1955, pp. 42–53. 3. Klochkov N.S., Egorov U.P., Mapelli C., Zabrodina I.K. Tin and nickel influence on the structure and properties of the leaded bronze obtained by centrifugal casting. Materials Science Forum , 2016, vol. 870, pp. 248– 252. DOI: 10.4028/www.scientific.net/MSF.870.248. 4. Mal’tsev M.V. Metallografiya promyshlennykh tsvetnykh metallov i splavov [Metallography of industrial non- ferrous metals and alloys]. Moscow, Metallurgiya Publ., 1970. 364 p. 5. Zakharov A.M. Promyshlennye splavy tsvetnykh metallov. Fazovyi sostav i strukturnye sostavlyayushchie [Industrial alloys of non-ferrous metals. Phase composition and structural components]. Moscow, Metallurgiya Publ., 1980. 256 p. 6. Zhang S., Jiang B., Ding W. Dry sliding wear of Cu-15Ni-8Sn alloy. Tribology International , 2010, vol. 43, iss. 1–2, pp. 64–68. DOI: 10.1016/j.triboint.2009.04.038. 7. Zhao J.C., Notis M.R. Spinodal decomposition, ordering transformation, and discontinuous precipitation in a Cu-15Ni-8Sn alloy. Acta Metallurgica , 1998, vol. 46, iss. 12, pp. 4203–4218. DOI: 10.1016/S1359-6454(98)00095-0. 8. Schwartz L.H., Plewes J.T. Spinodal decomposition in a Cu-9wt% Ni-6 wt% Sn-II. A critical examination of mechanical strength of spinodal alloys. Acta Metallurgica , 1974, vol. 22, iss. 7, pp. 911–921. DOI: 10.1016/0001- 6160(74)90058-3. 9. Kato M., Schwartz L.H. The temperature dependence of yield stress and work hardening in spinodally decomposed Cu-10Ni-6Sn alloy. Materials Science and Engineering , 1979, vol. 41, iss. 1, pp. 137–142. 10. Cribb W.R., Ratka J.O. Copper spinodal alloys. Advanced Materials & Processes , 2002, vol. 160, iss. 11, pp. 1–4. 11. Sadi F., Servant C. Phase transformations and phase diagram at equilibrium in the Cu-Ni-Sn system. Journal of Thermal Analysis and Calorimetry , 2007, vol. 90 (2), pp. 319–323. DOI: 10.1007/s10973-007-8347-6. 12. Caris J., Li D., Stephens Jr. J., Lewandowski J. Microstructural effects on tension behavior of Cu-15Ni-8Sn sheet. Materials Science and Engineering A , 2010, vol. 527, iss. 3, pp. 769–781. DOI: 10.1016/j.msea.2009.08.049. 13. Virtanen P., Tiainen T., Lepisto T. Precipitation at faceting grain boundaries of Cu-Ni-Sn alloys. Materials Science and Engineering A , 1998, vol. 251, iss. 1–2, pp. 269–275. DOI: 10.1016/S0921-5093(98)00498-5. 14. Zhang S.Z., Jiang B.H., Ding W.J. Wear of Cu-15Ni-8Sn spinodal alloy. Wear , 2008, vol. 264, iss. 3–4, pp. 199–203. DOI: 10.1016/j.wear.2007.03.003. 15. Baburaj E.G., Kulkarni U.D., Menon E.S.K., Krishnan R. Initial stages of decomposition in Cu-9Ni-6Sn. Journal of Applied Crystallography , 1979, vol. 12, iss. 5, pp. 476–480. DOI: 10.1107/S0021889879013066. 16. Gupta K.P. An expanded Cu-Ni-Sn system (copper-nickel-zinc). Journal of Phase Equilibria , 2000, vol. 21 (5), pp. 479–484. 17. Presnyakov A.A., Novikov A.V. [The study of the mechanical properties of tin bronze with the addition of zinc, phosphorus, lead and nickel]. Trudy Instituta yadernoi fiziki AN KazSSR [Proceedings of the Institute of Nuclear Physics of the Academy of Sciences of the Kazakh SSR], 1959, vol. 2, pp. 41–73. (In Russian). 18. Lakisov P.A. Povyshenie kachestva otlivok iz olovyannykh bronz [Improving the quality of tin bronze castings]. Fasonnoe lit’e mednykh splavov [Shaped casting of copper alloys]. Moscow, Mashgiz Publ., 1957, pp. 44–51. 19. Semenov K.G., Koloskov V.F., Chursin V.M. Razrabotka tekhnologii proizvodstva kachestvennykh otlivok iz chushkovykh olovyannykh bronz [Development of technology for the production of high-quality castings from pig tin bronz]. Liteinoe proizvodstvo = Foundry. Technologies and Equipment , 1994, no. 7, pp. 10–11. 20. Levashov E.A. Obespechenie edinstva izmerenii fiziko-mekhanicheskikh i tribologicheskikh svoistv nanostrukturirovannykh poverkhnostei [Ensuring the uniformity of measurements of physicomechanical and tribological properties of nanostructured surfaces]. Available at: http://www.nanometer.ru/2009/02/11/ nanometrologia_58090.html (accessed 13.05.2019). Conflicts of Interest The authors declare no conflict of interest.  2019 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY li- cense (http://creativecommons.org/licenses/by/4.0/ ).

RkJQdWJsaXNoZXIy MTk0ODM1