Zakovorotny V.L., Gvindjiliya V.E. 2019 Vol. 21 No. 4

OBRABOTKAMETALLOV Vol. 21 No. 4 2019 46 EQUIPMENT. INSTRUMENTS 45. Zakovorotny V.L., Gvindzhiliya V.E. Influence of spindle wobble in a lathe on the tool’s deformational- displacement trajectory. Russian Engineering Research , 2018, vol. 38, no. 8, pp. 623–631. DOI: 10.3103/ S1068798X1808018X. 46. Zakovorotny V.L., Gvindzhiliya V.E. Dynamic influence of spindle wobble in a lathe on the workpiece geometry. Russian Engineering Research , 2018, vol. 38, no. 9, pp. 723–725. DOI: 10.3103/S1068798X18090307. 47. Khamel S., Ouelaa N., Bouacha K. Analysis and prediction of tool wear, surface roughness and cutting forces in hard turning with CBN tool. Journal of Mechanical Sciences and Technology , 2012, vol. 26 (11), pp. 3605–3616. DOI: 10.1007/s12206-012-0853-1. 48. Zakovorotny V.L., LukyanovA.D. The problems of control of the evolution of the dynamic system interacting with the medium. International Journal of Mechanical Engineering and Automation , 2014, vol. 1, no. 5, pp. 271–285. 49. Zakovorotny V.L., Gvindzhiliya V.E. Evolution of the dynamic cutting system with irreversible energy transformation in the machining zone. Russian Engineering Research , 2019, vol. 39, no. 5, pp. 423–430. DOI: 10.3103/S1068798X19050204. 50. Zakovorotny V.L., Gvindzhiliya V.E. Bifurkatsii prityagivayushchikh mnozhestv deformatsionnykh smeshchenii rezhushchego instrumenta v khode evolyutsii svoistv protsessa obrabotki [Bifurcations of attracting sets of cutting tool deformation displacements at the evolution of treatment process properties]. Izvestiya vysshih uchebnyh zavedenij. Prikladnaya nelinejnaya dinamika = Izvestiya VUZ. Applied Nonlinear Dynamics , 2018, vol. 26, no. 5, pp. 20–38. DOI: 10.18500/0869-6632-2018-26-5-20-38. 51. Myshkis A.D. Matematika dlya vtuzov: spetsial’nye kursy [Mathematics. Special course]. Moscow, Nauka Publ., 1971. 640 p. Conflicts of Interest The authors declare no conflict of interest.  2019 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/ ).