Burkov A.A., Chigrin P.G., Kulik M.A. 2019 Vol. 21 No. 4

OBRABOTKAMETALLOV Vol. 21 No. 4 2019 68 MATERIAL SCIENCE References 1. Lin N., Zhao L., Liu Q., Zou J., Xie R., Yuan S., Li D., Zhang L., Wang Z., Tang B. Preparation of titanizing coating onAISI 316 stainless steel by pack cementation to mitigate surface damage: estimations of corrosion resistance and tribological behavior. Journal of Physics and Chemistry of Solids , 2019, vol. 129, pp. 387–400. DOI: 10.1016/j. jpcs.2019.01.029. 2. Günen A., Kurt B., Milner P., Gök M.S. Properties and tribological performance of ceramic-base chromium and vanadium carbide composite coatings. International Journal of Refractory Metals and Hard Materials , 2019, vol. 81, pp. 333–344. DOI: 10.1016/j.ijrmhm.2019.03.019. 3. Ebrahimifar H. Microstructure and oxidation behavior of cobalt diffusional coating fabricated on AISI 429 stainless steel. Oxidation of Metals , 2019, vol. 91, pp. 417–435. DOI: 10.1007/s11085-019-09889-y. 4. Perminov A.E., Ignatov M.G., Prokof’ev E.Yu. Rapid monitoring of the hardened-layer depth on a steel part. Russian Engineering Research , 2019, vol. 39, pp. 394–395. DOI: 10.3103/S1068798X19050162. 5. Chen C., Xie Y., Yan X., Huang R., Kuang M., Ma W., Zhao R., Wang J., Liu M., Ren Z., Liao H. Cold sprayed WC reinforced maraging steel 300 composites: microstructure characterization and mechanical properties. Journal of Alloys and Compounds , 2019, vol. 785, pp. 499–511. DOI: 10.1016/j.jallcom.2019.01.135. 6. Abu-warda N., López A.J., Utrilla M.V. High temperature corrosion and wear behavior of HVOF-sprayed coating of Al 2 O 3 -NiAl on AISI 304 stainless steel. Surface and Coatings Technology , 2019, vol. 359, pp. 35–46. DOI: 10.1016/j.surfcoat.2018.12.047. 7. Feng Y., Feng K., Yao C., Li Z. Effect of LaB 6 addition on the microstructure and properties of (Ti3Al + TiB)/Ti composites by laser cladding. Materials and Design , 2019, vol. 181, p. 107959. DOI: 10.1016/j.matdes.2019.107959. 8. Zhang Z., Wang X., Zhang Q., Liang Y., Ren L., Li X. Fabrication of Fe-based composite coatings reinforced by TiC particles and its microstructure and wear resistance of 40Cr gear steel by low energy pulsed laser cladding. Optics and Laser Technology , 2019, vol. 119, p. 105622. DOI: 10.1016/j.optlastec.2019.105622. 9. Furlan K.P., Mello J.D.B. De, Klein A.N. Self-lubricating composites containing MoS2: a review. Tribology International , 2018, vol. 120, pp. 280–298. DOI: 10.1016/j.triboint.2017.12.033. 10. Mahathanabodee S., Palathai T., Raadnui S., Tongsri R., Sombatsompop N. Dry sliding 10 wear behavior of SS316L composites containing h-BN and MoS2 solid lubricants. Wear , 2014, vol. 316, pp. 37–48. DOI: 10.1016/j. wear.2014.04.015. 11. Xiao J.K., Zhang W., Liu L.M., Zhang L., Zhang C. Tribological behavior of coppermolybdenum disulfide composites. Wear , 2017, vol. 384–385, pp. 61–71. DOI: 10.1016/j.wear.2017.05.006. 12. Xu S., Liu Y., Gao M., Kang K.-H., Shin D.-G., Kim D.-E. Superior lubrication of dense/porous-coupled nanoscale C/WS 2 multilayer coating on ductile substrate. Applied Surface Science , 2019, vol. 476, pp. 724–732. DOI: 10.1016/j.apsusc.2019.01.170. 13. Cardinal M.F., Castro P.A., Baxi J., Liang H., Williams F.J. Characterization and frictional behavior of nanostructured Ni-W-MoS 2 composite coatings. Surface and Coatings Technology , 2009, vol. 204, pp. 85–90. DOI: 10.1016/j.surfcoat.2009.06.037. 14. Cao T., Lei S., Zhang M. The friction and wear behavior of Cu/Cu-MoS 2 self-lubricating coating prepared by electrospark deposition. Surface and Coatings Technology , 2015, vol. 270, pp. 24–32. DOI: 10.1016/j. surfcoat.2015.03.023. 15. Arenas M.A., Ahuir-Torres J.I., García I., Carvajal H., Damborenea J. de. Tribological behaviour of laser textured Ti6Al4V alloy coated with MoS 2 and graphene. Tribology International , 2018, vol. 128, pp. 240–247. DOI: 10.1016/j.triboint.2018.07.031. 16. Li S., Zhao X., An Y., Liu D., Zhou H., Chen J. YSZ/MoS 2 self-lubricating coating fabricated by thermal spraying and hydrothermal reaction. Ceramics International , 2018, vol. 44, pp. 17864–17872. DOI: 10.1016/j. ceramint.2018.06.258. 17. Wang W., Wang D., Han F. Improvement of corrosion resistance of twinning-induced plasticity steel by hot-dipping aluminum with subsequent thermal diffusion treatment. Materials Letters , 2019, vol. 248, pp. 60–64. DOI: 10.1016/j.matlet.2019.04.001.