Soboleva N.N., Makarov A.V. et. al. 2020 Vol. 22 No. 2

OBRABOTKAMETALLOV Vol. 22 No. 2 2020 115 MATERIAL SCIENCE 2. Khomyakov M.N., Pinaev P.A., Statsenko P.A., Miroshnichenko I.B., Grachev G.N. Poluchenie uprochnyayushchikh pokrytii iz amor fi ziruemykh splavov Fe–Cr–Si–B–C lazerno-plazmennymi metodami [Formation of hardening coatings based on Fe-Cr-Si-B-C alloys with high glass-forming ability by laser-plasma methods]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2018, vol. 20, no. 4, pp. 21–34. DOI: 10.17212/1994-6309-2018-20.4-21-34. (In Russian). 3. Eremin E.N., Losev A.S., Borodikhin S.A., Ponomarev I.A., Matalasova A.E. Vybor parametrov termicheskoi obrabotki naplavlennykh vysokokhromistykh pokrytii, legirovannykh kompleksom boridnykh soedinenii [Rationalization of heat treatment parameters of the surfaced high-chromium coatings alloyed with a complex of boride compounds]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2018, vol. 20, no. 4, pp. 72–82. DOI: 10.17212/1994-6309-2018-20.4-72-82. (In Russian). 4. Kornienko E.E., Nikulina A.A., Bannov A.G., Kuz’min V.I., Mildebrath M., Bezrukova V.A., Zhoidik A.A. Vliyanie temperatury oplavleniya na strukturu i svoistva samo fl yusuyushchikhsya pokrytii na osnove nikelya [The in fl uence of fl owing temperature on the structure and properties of the self- fl uxing coatings]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2016, no. 4, pp. 52–62. DOI: 10.17212/1994-6309-2016-4-52-62. (In Russian). 5. Chen L., Wang H., Zhao C., Lu S., Wang Z., Sha J., Chen S., Zhang L. Automatic remelting and enhanced mechanical performance of a plasma sprayed NiCrBSi coating. Surface and Coatings Technology , 2019, vol. 369, pp. 31–43. DOI: 10.1016/j.surfcoat.2019.04.052. 6. Xiao J., Wu Y., Zhang W., Chen J., Wei X., Zhang C. Microstructure, wear and corrosion behaviors of plasma sprayed NiCrBSi-Zr coating. Surface and Coatings Technology , 2019, vol. 360, pp. 172–180. DOI: 10.1016/j. surfcoat.2018.12.114. 7. Tobar M.J., Álvares C., Amado J.M., Rodríguez G., Yáñez A. Morphology and characterization of laser clad composite NiCrBSi–WC coatings on stainless steel. Surface and Coatings Technology , 2006, vol. 200, iss. 22–23, pp. 6313–6317. DOI: 10.1016/j.surfcoat.2005.11.093. 8. Gao W., Chang C., Li G., Xue Y., Wang J., Zhang Z., Lin X. Study on the laser cladding of FeCrNi coating. Optik , 2019, vol. 178, pp. 950–957. DOI: 10.1016/j.ijleo.2018.10.062. 9. D’Oliveira A.S.C.M., Vilar R., Feder C.G. High temperature behavior of plasma transferred arc and laser Co-based alloy coatings. Applied Surface Science , 2002, vol. 201, iss. 1–4, pp. 154–160. DOI: 10.1016/S0169- 4332(02)00621-9. 10. Tamanna N., Crouch R., Naher S. Progress in numerical simulation of the laser cladding process. Optics and Lasers in Engineering , 2019, vol. 122, pp. 151–163. DOI: 10.1016/j.optlaseng.2019.05.026. 11. Li C., Zhang Q., Wang F., Deng P., Lu Q., Zhang Y., Li S., Ma P., Li W., Wang Y. Microstructure and wear behaviors of WC-Ni coatings fabricated by laser cladding under high frequency micro-vibration. Applied Surface Science , 2019, vol. 485, pp. 513–519. DOI: 10.1016/j.apsusc.2019.04.245. 12. Navas С ., Colaço R., Damborenea J. de, Vilar R. Abrasive wear behavior of laser clad and fl ame sprayed- melted NiCrBSi coatings. Surface and Coatings Technology , 2006, vol. 200, iss. 24, pp. 6854–6862. DOI: 10.1016/j. surfcoat.2005.10.032. 13. González R., Cadenas M., Fernández R., Cortizo J.L., Rodríguez E. Wear behaviour of fl ame sprayed NiCrBSi coating remelted by fl ame or by laser. Wear , 2007, vol. 262, iss. 3–4, pp. 301–307. DOI: 10.1016/j.wear.2006.05.009. 14. Guo Ch., Zhou J., Chen J., Zhao J., Yu Y., Zhou H. High temperature wear resistance of laser cladding NiCrBSi and NiCrBSi/WC-Ni composite coatings. Wear , 2011, vol. 270, iss. 7–8, pp. 492–498. DOI: 10.1016/j. wear.2011.01.003. 15. Gómez-del Río T., Garrido M.A., Fernández J.E., Cadenas M., Rodríguez J. In fl uence of the deposition techniques on the mechanical properties and microstructure of NiCrBSi coatings. Journal of Materials Processing Technology , 2008, vol. 204, iss. 1–3, pp. 304–312. DOI: 10.1016/j.jmatprotec.2007.11.042. 16. Serres N., Portha N., Machi F. In fl uence of salt fog aging tests on mechanical resistance of laser clad-coatings. Surface and Coatings Technology , 2011, vol. 205, iss. 23–24, pp. 5330–5337. DOI: 10.1016/j.surfcoat.2011.05.042. 17. Xuan H.-F., Wang Q.-Y., Bai S.-L., Liu Z.-D., Sun H.-G., Yan P.-Ch. A study on microstructure and fl ame erosion mechanism of a graded Ni–Cr–B–Si coating prepared by laser cladding. Surface and Coatings Technology , 2014, vol. 244, pp. 203–209. DOI: 10.1016/j.surfcoat.2014.02.021. 18. Smirnov S.V., Veretennikova I.A., Smirnova E.O., Pestov A.V. Otsenka vliyaniya napolnitelei na mekhanicheskie svoistva epoksidnogo kleevogo pokrytiya, opredelennye metodom instrumental’nogo mikroindentirovaniya [Estimating the effect of fi llers on the mechanical properties of epoxy glue coatings by

RkJQdWJsaXNoZXIy MTk0ODM1