Kuznetsov M.A., Danilov V.I., Krampit M.A., Chinakhov D.A., Slobodyan M.S. 2020 Vol. 22 No. 3

ОБРАБОТКА МЕТАЛЛОВ Том 22 № 3 2020 26 ТЕХНОЛОГИЯ compared to green sand casting and CNC milling in stainless steel // Journal of Cleaner Production. – 2018. – Vol. 177. – P. 438–447. – DOI: 10.1016/ j.jclepro.2017.12.148. 49. Hoefer K., Haelsig A., Mayr P. Arc-based ad- ditive manufacturing of steel components – compari- son of wire- and powder-based variants // Welding in the World. – 2018. – Vol. 62, iss. 2. – P. 243–247. – DOI: 10.1007/s40194-017-0527-9. 50. Tandem metal inert gas process for high pro- ductivity wire arc additive manufacturing in stainless steel / F. Martina, J. Ding, S. Williams, A. Caballero, G. Pardal, L. Quintino // Additive Manufacturing. – 2019. – Vol. 25. – P. 545–550. – DOI: 10.1016 /j.ad- dma.2018.11.022. 51. Wire-arc additive manufacturing of a duplex stainless steel: thermal cycle analysis and microstructure characterization / V. A Hosseini, M.Högström, K. Hur- tig, M.A. Valiente Bermejo, L.-E. Stridh, L. Karlsson // Welding in the World. – 2019. – Vol. 63. – P. 975–987. – DOI: 10.1007/s40194-019-00735-y. 52. Heat-treatment effects on a bimetallic additive- ly-manufactured structure (BAMS) of the low-carbon steel and austenitic-stainless steel / Md.R.U. Ahsan, A.N.M. Tanvir, G.-J. Seo, B. Bates, W. Hawkins, C. Lee, P.K. Liaw, M. Noakes, A. Nycz, D.B. Kim // Addi- tive Manufacturing. – 2020. – Vol. 32. – P. 101036. – DOI: 10.1016/j.addma.2020.101036. 53. Experimental results for structural design of wire-and-arc additive manufactured stainless steel mem- bers / V. Laghi, M. Palermo, G. Gasparini, V.A. Girelli, T. Trombetti // Journal of Constructional Steel Research. – 2020. – P. 105858. – DOI: 10.1016/j.jcsr.2019.105858. 54. Wire-based additive manufacturing of stainless steel components / J.W. Elmer, J. Vaja, J.S. Carpenter, D.R. Coughlin, M.J. Dvornak, P. Hochanadel, P. Gu- rung, A. Johnson, G. Gibbs // Welding Journal. – 2020. – Vol. 99, iss. 1. – P. 8s–24s. – DOI: 10.29391/2020.99.002. 55. In-process control of distortion in wire and arc additive manufacturing based on a fl exible multipoint support fi xture / F. Li, S. Chen, J. Shi, Y. Zhao // Sci- ence and Technology of Welding and Joining. – 2019. – Vol. 24, iss. 1. – P. 36–42. – DOI: 10.1080/13621718.20 18.1476083. 56. Effect of process parameters on the quality of aluminium alloy Al 5 Si deposits in wire and arc ad- ditive manufacturing using a cold metal transfer pro- cess / A.G. Ortega, L.C. Galvan, F. Deschaux-Beaume, B. Mezrag, S. Rouquette // Science and Technology of Welding and Joining. – 2018. – Vol. 23, iss. 4. – P. 316– 332. – DOI: 10.1080/13621718.2017.1388995. 57. Optimisation of interpass temperature and heat input for wire and arc additive manufacturing 5A06 alu- minium alloy / H. Geng, J. Li, J. Xiong, X. Lin // Sci- ence and Technology of Welding and Joining. – 2017. – Vol. 22, iss. 6. – P. 472–483. – DOI: 10.1080/13621718. 2016.1259031. 58. Characterisation of 4043 aluminium alloy de- posits obtained by wire and arc additive manufactur- ing using a cold metal transfer process / A.G. Ortega, L.C. Galvan, M. Salem, K. Moussaoui, S. Segonds, S. Rouquette, F. Deschaux-Beaume // Science and Technology of Welding and Joining. – 2019. – Vol. 24, iss. 6. – P. 538–547. – DOI: 10.1080/13621718.2018. 1564986. 59. Effects of milling thickness on wire deposition accuracy of hybrid additive/subtractive manufacturing / S. Zhang, Y. Zhang, M. Gao, F. Wang, Q. Li, X. Zeng // Science and Technology of Welding and Joining. – 2019. – Vol. 24, iss. 5. – P. 375–381. – DOI: 10.1080/13 621718.2019.1595925. 60. Micropore evolution in additively manufactured aluminum alloys under heat treatment and inter-layer rolling / J. Gu, S. Yang, M. Gao, J. Bai, Y. Zhai, J. Ding // Materials and Design. – 2020. – Vol. 186. – P. 108288. – DOI: 10.1016/j.matdes.2019.108288. 61. Real-time seam defect identi fi cation for Al alloys in robotic arc welding using optical spectroscopy and in- tegrating learning / Z. Zhang, W. Ren, Z. Yang, G. Wen // Measurement. – 2020. – Vol. 156. – P. 107546. – DOI: 10.1016/j.measurement.2020.107546. 62. Comparative study of microstructure evaluation and mechanical properties of 4043 aluminum alloy fab- ricated by wire-based additive manufacturing / Q. Miao, D. Wu, D. Chai, Y. Zhan, G. Bi, F. Niu, G. Ma // Ma- terials and Design. – 2020. – Vol. 186. – P. 108205. – DOI: 10.1016/j.matdes.2019.108205. 63. Ultrasonic phased array inspection of a wire + arc additive manufactured (WAAM) sample with inten- tionally embedded defects / Y. Javadi, C.N. MacLeod, S.G. Pierce, A. Gachagan, D. Lines, C. Mineo, J. Ding, S. Williams, M. Vasilev, E. Mohseni, R. Su // Addi- tive Manufacturing. – 2019. – Vol. 29. – P. 100806. – DOI: 10.1016/j.addma.2019.100806. 64. Horii T., Kirihara S., Miyamoto Y. Freeform fabrication of Ti–Al alloys by 3D micro-welding // Intermetallics. – 2008. – Vol. 16. – P. 1245–1249. – DOI: 10.1016/j.intermet.2008.07.009. 65. Fusion zone geometries, cooling rates and solidi fi cation parameters during wire arc additive manufacturing / W. Ou, T. Mukherjee, G.L. Knapp, Y. Wei, T. DebRoy // International Journal of Heat and Mass Transfer. – 2018. – Vol. 127. – P. 1084–1094. – DOI: 10.1016/j.ijheatmasstransfer.2018.08.111. 66. Development of wire + arc additive manufac- ture for the production of large-scale unalloyed tung- sten components / G. Marinelli, F. Martina, S. Ganguly, S. Williams // International Journal of Refractory Metals