Kuznetsov M.A., Danilov V.I., Krampit M.A., Chinakhov D.A., Slobodyan M.S. 2020 Vol. 22 No. 3

OBRABOTKAMETALLOV Vol. 22 No. 3 2020 32 TECHNOLOGY 58. Ortega A.G., Galvan L.C., Salem M., MoussaouiK., Segonds S., Rouquette S., Deschaux-Beaume F. Characterisation of 4043 aluminium alloy deposits obtained by wire and arc additive manufacturing using a cold metal transfer process, Science and Technology of Welding and Joining , 2019, vol. 24, iss. 6, pp. 538–547. DOI: 10.1080/13621718.2018.1564986. 59. Zhang S., Zhang Y., Gao M., Wang F., Li Q., Zeng X. Effects of milling thickness on wire deposition accuracy of hybrid additive/subtractive manufacturing. Science and Technology of Welding and Joining , 2019, vol. 24, iss. 5, pp. 375–381. DOI: 10.1080/13621718.2019.1595925. 60. Gu J., Yang S., Gao M., Bai J., Zhai Y., Ding J. Micropore evolution in additively manufactured aluminum alloys under heat treatment and inter-layer rolling. Materials and Design , 2020, vol. 186, p. 108288. DOI: 10.1016/j. matdes.2019.108288. 61. Zhang Z., Ren W., Yang Z., Wen G. Real-time seam defect identi fi cation for Al alloys in robotic arc welding using optical spectroscopy and integrating learning. Measurement , 2020, vol. 156, p. 107546. DOI: 10.1016/j. measurement.2020.107546. 62. Miao Q., Wu D., Chai D., Zhan Y., Bi G., Niu F., Ma G. Comparative study of microstructure evaluation and mechanical properties of 4043 aluminum alloy fabricated by wire-based additive manufacturing. Materials and Design , 2020, vol. 186, p. 108205. DOI: 10.1016/j.matdes.2019.108205. 63. Javadi Y., MacLeod C.N., Pierce S.G., Gachagan A., Lines D., Mineo C., Ding J., Williams S., Vasilev M., Mohseni E., Su R. Ultrasonic phased array inspection of a wire + arc additive manufactured (WAAM) sample with intentionally embedded defects. Additive Manufacturing , 2019, vol. 29, p. 100806. DOI: 10.1016/j. addma.2019.100806. 64. Horii T., Kirihara S., Miyamoto Y. Freeform fabrication of Ti–Al alloys by 3D micro-welding. Intermetallics , 2008, vol. 16, pp. 1245–1249. DOI: 10.1016/j.intermet.2008.07.009. 65. OuW., Mukherjee T., Knapp G.L., Wei Y., DebRoy T. Fusion zone geometries, cooling rates and solidi fi cation parameters during wire arc additive manufacturing. International Journal of Heat and Mass Transfer , 2018, vol. 127, pp. 1084–1094. DOI: 10.1016/j.ijheatmasstransfer.2018.08.111. 66. Marinelli G., Martina F., Ganguly S., Williams S. Development of wire + arc additive manufacture for the production of large-scale unalloyed tungsten components. International Journal of Refractory Metals and Hard Materials , 2019, vol. 82, pp. 329–335. DOI: 10.1016/j.ijrmhm.2019.05.009. 67. Marinelli G., Martina F., Lewtas H., Hancock D., Mehraban S., Lavery N., Ganguly S., Williams S. Microstructure and thermal properties of unalloyed tungsten deposited by wire + arc additive manufacture. Journal of Nuclear Materials , 2019, vol. 522, pp. 45–53. DOI: 10.1016/j.jnucmat.2019.04.049. 68. Abe T., Mori D., Sonoya K., Nakamura M., Sasahara H. Control of the chemical composition distribution in deposited metal by wire and arc-based additive manufacturing. Precision Engineering , 2019, vol. 55, pp. 231–239. DOI: 10.1016/j.precisioneng.2018.09.010. 69. Zeng Z., Cong B.Q., Oliveira J.P., Ke W.C., Schell N., Peng B., Qi Z.W., Ge F.G., Zhang W., Ao S.S. Wire and arc additive manufacturing of a Ni-rich NiTi shape memory alloy: Microstructure and mechanical properties. Additive Manufacturing , 2020, vol. 32, p. 101051. DOI: 10.1016/j.addma.2020.101051. 70. Kuznetsov M.A., Krampit M.A. [The design of the 3d printer for electric-arc layered growth of metal products]. Innovatsii v informatsionnykh tekhnologiyakh, mashinostroenii i avtotransporte: sbornik materialov II Mezhdunarodnoi nauchno-prakticheskoi konferentsii [Proceedings 2nd International conference “Innovations in information technology, engineering and motor vehicles”]. Kemerovo, 2018, pp. 151–153. (In Russian). 71. Kuznetsov M., Zernin E., Krampit M., Danilov V., Shlyakhova G. Structural and chemical analysis of 3d printed metal products. International Journal of Advanced Science and Technology , 2019, vol. 28, iss. 15, pp. 699–709. 72. Krampit A.G., Krampit M.A. Determination of a wire heat temperature under a pulse-arc welding condition y means of a calculation and graphic method. Applied Mechanics and Materials , 2014, vol. 682, pp. 392–396. DOI: 10.4028/www.scienti fi c.net/AMM.682.392. Con fl icts of Interest The authors declare no con fl ict of interest.  2020 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/ ).