Kuchumova I.D., Batraev I.S., Cherkasova N.Y., Ukhina A.V., Shtertser A.A., Jorge A.M. 2020 Vol. 22 No. 3

OBRABOTKAMETALLOV Vol. 22 No. 3 2020 104 MATERIAL SCIENCE References 1. Inoue A., Takeuchi A. Recent development and application products of bulk glassy alloys. Acta Materialia , 2011, vol. 59, iss. 6, pp. 2243–2267. DOI: 10.1016/j.actamat.2010.11.027. 2. Lu Z.P., Liu C.T., Thompson J.R., Porter W.D. Structural amorphous steels. Physical Review Letters , 2004, vol. 92, iss. 24. pp. 501–504. DOI: 10.1103/physrevlett.92.245503. 3. Pang S., Zhang T., Asami K., Inoue A. Synthesis of Fe–Cr–Mo–C–B–P bulk metallic glasses with high corrosion resistance. Acta Materialia , 2002, vol. 50, iss. 3, pp. 489–497. DOI: 10.1016/s1359-6454(01)00366-4. 4. Kawakita J., Kuroda S., Fukushima T., Kodama T. Improvement of corrosion resistance of high-velocity oxyfuel-sprayed stainless steel coatings by addition of molybdenum. Journal of Thermal Spray Technology , 2005, vol. 14, pp. 224–230. DOI: 10.1361/10599630523782. 5. Masumoto T., Hashimoto K. Chemical properties of amorphous metals. Annual Review of Material Science , 1978, vol. 8, pp. 215–233. 6. Naka M., Hashimoto K., Masumoto T. Effects of annealing on the corrosion of glassy chromium-containing alloys. Science Reports of the Research Institutes , 1977, vol. 26, pp. 283–289. 7. Keryvin V., Hoang V.H., Shen J. Hardness, toughness, brittleness and cracking systems of an iron-based bulk metallic glass by indentation. Intermetallics , 2009, vol. 17, pp. 211–217. DOI: 10.1016/j.intermet.2008.08.017. 8. Gu X.J., Poon S.J., Shi fl et G.J., Widom M. Ductility improvement of amorphous steels: roles of shear modulus and electronic structure. Acta Materialia , 2008, vol. 56, pp. 88–94. DOI: 10.1016/j.mser.2015.12.001. DOI: 10.1016/j. actamat.2007.09.011. 9. Qiao J., Jia H., Liaw P.K. Metallic glass matrix composites. Materials Science and Engineering: R: Reports , 2016, vol. 100, pp. 1–69. DOI: 10.1016/j.mser.2015.12.001. 10. StoicaM.,EckertJ.,RothS.,ZhangH.F.,SchultzJ.,WangW.H.MechanicalbehaviorofFe 65.5 Cr 4 Mo 4 Ga 4 P 12 C 5 B 5.5 bulk metallic glass. Intermetallics , 2005, vol. 13, pp. 764–769. DOI: 10.1016/j.intermet.2004.12.016. 11. Berger J.E., Schulz R., Savoie S., Gallego J., Kiminami C.S., Bolfarini C., Botta W.J. Wear and corrosion properties of HVOF coatings from Superduplex alloy modi fi ed with addition of boron. Surface and Coatings Technology , 2017, vol. 309, pp. 911–919. DOI: 10.1016/j.surfcoat.2016.10.062. 12. Guo Y., Koga G.Y., Jorge A.M., Savoie S., Schulz R., Kiminami C.S., Bolfarini C., Botta W.J. Microstructural investigation of Fe-Cr-Nb-B amorphous/nanocrystalline coating produced by HVOF. Materials & Design , 2016, vol. 111, pp. 608–615. DOI: 10.1016/j.matdes.2016.09.027. 13. Wang Y., Xing Z.Z., Luo Q., Rahman A., Jiao J., Qu S.J., Zheng Y.G., Shena J. Corrosion and erosion– corrosion behaviour of activated combustion high-velocity air fuel sprayed Fe-based amorphous coatings inchloride- containing solutions. Corrosion Science , 2015, vol. 98, pp. 339–353. DOI: 10.1016/j.corsci.2015.05.044. 14. Zhang C., Chan K.C., Wu Y., Liu L. Pitting initiation in Fe-based amorphous coatings. Acta Materialia , 2012, vol. 60, pp. 4152–4159. DOI: 10.1016/j.actamat.2012.04.005. 15. Jayaraj J., Kim K.B., Ahn H.S., Fleury E. Corrosion mechanism of N-containing Fe–Cr–Mo–Y–C–B bulk amorphous alloys in highly concentrated HCl solution. Materials Science and Engineering: A , 2007, vol. 449–451, pp. 517–520. DOI: 10.1016/j.msea.2006.02.418. 16. Yang Y., Zhang C., Peng Y., Yu Y., Liu L. Effects of crystallization on the corrosion resistance of Fe-based amorphous coatings. Corrosion Science , 2012, vol. 59, pp. 10–19. DOI: 10.1016/j.corsci.2012.02.003. 17. Koga G.Y., Jorge Junior A.M., Roche V., Nogueira R.P., Schulz R., Savoie S., Melle A.K., Loable C., Bolfarini C., Kiminami C., Botta W. Production and corrosion resistance of thermally sprayed fe-based amorphous coatings from mechanically milled feedstock powders. Metallurgical and Materials Transactions A , 2018, vol. 49, pp. 4860–4870. DOI: 10.1007/s11661-018-4785-y. 18. Xie L., Wang Y.-M., Xiong X., Chen Z.-K., Wang Y.-L. Effects of oxygen fuel rate on microstructure and wear properties of detonation sprayed iron-based amorphous coatings. Materials Transactions Received , 2018, vol. 3, pp. 1867–1871. DOI: 10.2320/matertrans.M2018273. 19. Kuchumova I.D., Batraev I.S., Cherkasova N.Y., Rybin D.K., UkhinaA.V., Botta W.J., Koga G.Y., JorgeA.M. The in fl uence of the O 2 /C 2 H 2 ratio on the structure and properties of Fe 66 Cr 10 Nb 5 B 19 detonation coatings. Materials Today: Proceedings , 2020, vol. 25, pp. 384–386. DOI: 10.1016/j.matpr.2019.12.098. 20. Zhou Z., Wang L., Wang F., Liu Y. Formation and corrosion behavior of Fe-based amorphous metallic coatings prepared by detonation gun spraying. Transactions of Nonferrous Metals Society of China , 2009, vol. 19, pp. 634–638. DOI: 10.1016/S1003-6326(10)60123-9. 21. Wu H., Lan X., Liu Y., Li F., Zhang W., Chen Z., Zai X., Zeng H. Fabrication, tribological and corrosion behaviors of detonation gun sprayed Fe-based metallic glass coating. Transactions of Nonferrous Metals Society of China , 2016, vol. 26, pp. 1629–1637. DOI: 10.1016/S1003-6326(16)64271-1.