Technological Assurance of Fiberglass Composites Surface Layer Quality during End Milling

OBRABOTKAMETALLOV Vol. 22 No. 4 2020 39 TECHNOLOGY 5. Arola D., Ramulu M. Orthogonal cutting of fi ber-reinforced composites: a fi nite element analysis. International Journal of Mechanical Sciences , 1997, vol. 39, iss. 5, pp. 597–613. DOI: 10.1016/S0020-7403(96)00061-6. 6. Markov A.M. Tekhnologicheskie osobennosti mekhanicheskoi obrabotki detalei iz kompozitsionnykh materialov [Technological features of machining of parts from composite materials]. Naukoemkie tekhnologii v mashinostroenii = Science Intensive Technologies in Mechanical Engineering , 2014, no. 7 (37), pp. 3–8. 7. Markov A.M., Nekrasov V.N., Salman A.M., Gayst S.V., Su J. Issledovanie vliyaniya tekhnologicheskikh parametrov na prochnost’ rez’bovogo soedineniya v detalyakh iz ugleplastika [Study of the in fl uence of technological parameters on the strength of a threaded connection in carbon fi ber parts]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty)=MetalWorkingandMaterial Science , 2020, vol. 22, iss. 2, pp. 6–15.DOI: 10.17212/1994- 6309-2020-22.2-6-15. 8. Ebeling T., Hiltner A., Baer E., Fraser I.M., Orton M.L. Delamination failure of a woven glass fi ber composite. Journal of Composite Materials , 1997, vol. 31, iss. 13, pp. 1318–1333. DOI: 10.1177/002199839703101304. 9. Palanikumar K., Karunamoorthy L., Karthikeyan R. Assessment of factors in fl uencing surface roughness on the machining of glass fi ber-reinforced polymer composites. Materials and Design , 2006, vol. 27, iss. 10, pp. 862– 871. DOI: 10.1016/j.matdes.2005.03.011. 10. Krishnamoorthy A., Boopathy S.R., Palanikumar K. Delamination analysis in drilling of cfrp composites using response surface methodology. Journal of Composite Materials , 2009, vol. 43, iss. 24, pp. 2885–2902. DOI: 10.1177/0021998309345309. 11. Kini M.V., Chincholkar A.M. Effect of machining parameters on surface roughness and material removal rate in fi nish turning of ±30° glass fi bre reinforced polymer pipes. Materials and Design , 2010, vol. 31, iss. 7, pp. 3590– 3598. DOI: 10.1016/j.matdes.2010.01.013. 12. Markov A.M., Schiggel N. [Quality assurance of parts production from composites]. Innovatsii v mashinostroenii (InMash-2017): sbornik trudov VIII Mezhdunarodnoi nauchno-prakticheskoi konferentsii [Proceedings VIII International Scienti fi c and Practical Conference “Innovations in mechanical engineering (ISPCIME-2017)”]. Novosibirsk, 2017, pp. 219–225. (In Russian). 13. Belov E.B., Leonov S.L., Markov A.M., Sitnikov A.A., Khomenko V.A. Forecasting of machined surface waviness on the basis of self-oscillations analysis. IOP Conference Series: Earth and Environmental Science , 2017, vol. 50 (1), pp. 1–6. DOI: 10.1088/1755-1315/50/1/012053. 14. Virakthi A., Kwon S.W., Lee S.W, Robeson M.E. Delamination resistance of composite laminated structures reinforced with angled, threaded, and anchored Z-pins. Journal of Composite Materials , 2018, vol. 53, iss. 11. DOI: 10.1177/0021998318805201. 15. SongD.Y., TakedaN., Ogihara S.Amethod of stress analysis for interfacial property evaluation in thermoplastic composites. Materials Science and Engineering: A , 2000, vol. 278, iss. 1–2, pp. 242–246. DOI: 10.1016/S0921- 5093(99)00578-X. 16. Ramulu M., Kim D., Choi G. Frequency analysis and characterization in orthogonal cutting of glass fi ber reinforced composites. Composites Part A: Applied Science and Manufacturing , 2003, vol. 34, iss. 10, pp. 949–962. DOI: 10.1016/S1359-835X(03)00203-3. 17. Petrov M.G. Otsenka strukturnogo sostoyaniya kompozitsionnykh materialov v protsesse razrusheniya [Evaluation of the composite materials structural condition during fracture]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2014, no. 4, pp. 61–67. 18. Song S., Zuo D. Modelling and simulation of whirling process based on equivalent cutting volume. Simulation Modelling Practice and Theory , 2014, vol. 42, pp. 98–106. DOI: 10.1016/j.simpat.2013.12.011. 19. Palanikumar K., Davim J.P. Assessment of some factors in fl uencing tool wear on the machining of glass fi bre- reinforced plastics by coated cemented carbide tools. Journal of Materials Processing Technology , 2009, vol. 209, iss. 1, pp. 511–519. DOI: 10.1016/j.jmatprotec.2008.02.020. 20. Kalla D., Sheikh-Ahmad J., Twomey J. Prediction of cutting forces in helical end milling fi ber reinforced polymers. International Journal ofMachine Tools andManufacture , 2010, vol. 50, iss. 10, pp. 882–891. DOI: 10.1016/j. ijmachtools.2010.06.005. 21. Feito N., Díaz-Álvarez J., Díaz-Álvarez A., Cantero J.L., Miguélez M.H. Experimental analysis of the in fl uence of drill point angle and wear on the drilling of woven CFRPs. Materials , 2014, vol. 7 (6), pp. 4258–4271. DOI: 10.3390/ma7064258. 22. Yanyushkin A.S., Lobanov D.V., Mulyukhin N.V. Puti resheniya problem formoobrazovaniya rezhushchego instrumenta dlya obrabotki nemetallicheskikh kompozitov [The lines of approach to the problems of shaping the