Technological investigation of effect of machining parameter on tool life

OBRABOTKAMETALLOV Vol. 22 No. 4 2020 53 TECHNOLOGY 4. Bhuiyan M.S.H., Choudhury I.A. Review of sensor applications in tool condition monitoring in machining. Comprehensive Materials Processing , 2014, vol. 13, pp. 539–569. DOI: 10.1016/B978-0-08-096532-1.01330-3. 5. Zhu K., Wong Y.S., Hong G.S. Multi-category micro-milling tool wears monitoring with continuous hidden Markov models. Mechanical Systems and Signal Processing , 2009, vol. 23, iss. 2, pp. 547–560. DOI: 10.1016/j. ymssp.2008.04.010. 6. Scheffer C., Kratz H., Heyns P.S., Klocke F. Development of a tool wear-monitoring system for hard turning. International Journal of Machine Tools and Manufacture , 2003, vol. 43, iss. 10, pp. 973–985. DOI: 10.1016/S0890- 6955(03)00110-X. 7. Lee K., Dornfeld D.A. Micro-burr formation and minimization through process control. Precision Engineering , 2005, vol. 29, iss. 2, pp. 246–252. DOI: 10.1016/j.precisioneng.2004.09.002. 8. ShawM.C. Metal cuttingprinciples .2nded.Oxford,OxfordUniversityPress,2005.672p. ISBN9780195142068. 9. GrzesikW., Zalisz Z.Wear phenomenon in the hard steel machining using ceramic tools. Tribology International , 2008, vol. 41, iss. 8, pp. 802–812. DOI: 10.1016/j.triboint.2008.02.003. 10. Dhar N.R., Paul S., Chattopadhyay A.B. The in fl uence of cryogenic cooling on tool wear, dimensional accuracy and surface fi nish in turning AISI 1040 and E4340C steels. Wear , 2001, vol. 249, iss. 10–11, pp. 932–942. DOI: 10.1016/S0043-1648(01)00825-0. 11. Venugopal K.A., Paul S., Chattopadhyay A.B. Growth of tool wear in turning of Ti-6Al-4V alloy under cryogenic cooling. Wear , 2007, vol. 262, iss. 9–10, pp. 1071–1078. DOI: 10.1016/j.wear.2006.11.010. 12. Özel T., Karpat Y., Figueira L., Davim J.P. Modelling of surface fi nish and tool fl ank wear in turning of AISI D2 steel with ceramic wiper inserts. Journal of Materials Processing Technology , 2007, vol. 189, iss. 1–3, pp. 192– 198. DOI: 10.1016/j.jmatprotec.2007.01.021. 13. Luo X., Cheng K., Holt R., Liu X. Modeling fl ank wear of carbide tool insert in metal cutting. Wear , 2005, vol. 259, iss. 7–12, pp. 1235–1240. DOI: 10.1016/j.wear.2005.02.044. 14. Simsive J.V., Kutyshkin A.V., Simsive D.C. Otsenka iznosa tverdosplavnogo rezhushchego instrumenta pri mekhanicheskoi obrabotke [Estimation of the tool crater wear of the cutting tool with carbide cutting inserts in turning]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2012, no. 1, pp. 50–55. 15. Maekawa K., Obikawa T., Yamane Y., Childs T.H. Metal Machining: Theory and Applications . 1st ed. Oxford, Butterworth-Heinemann Publ., 2000. 408 p. ISBN 978-0340691595. ISBN 034069159X. 16. Fontalvo G.A., Humer R., Mitterer C., Sammt K., Schemmel I. Microstructural aspects determining the adhesive wear of tool steels. Wear , 2006, vol. 260, iss. 9–10, pp. 1028–1034. DOI: 10.1016/j.wear.2005.07.001. 17. Khrais S.K., Lin Y.J. Wear mechanisms and tool performance of TiAlN PVD coated inserts during machining of AISI 4140 steel. Wear , 2007, vol. 262, iss. 1–2, pp. 64–69. DOI: 10.1016/j.wear.2006.03.052. 18. Emel’yanov S.G., Yatsun E.I., Shvets S.V., Remnev A.I., Pavlov E.V. In fl uence of buildup in lathe processes on tool life and surface quality. Russian Engineering Research , 2011, vol. 31, iss. 12, pp. 1276–1278. DOI: 10.3103/ S1068798X11120100. 19. Machine tool design handbook . Central Machine Tool Institute (CMTI). New Delhi, McGraw-Hill Education Publ., 1983, pp. 421–588. 20. Sheikh-Ahmad J.Y., Bailey J.A. High-temperature wear of cemented tungsten carbide tools while machining particleboard and fi berboard. Journal of Wood Science , 1999, vol. 45, iss. 6, pp. 445–455. DOI: 10.1007/BF00538952. 21. Benardos P.G., Vosniakos G.C. Predicting surface roughness in machining: a review. International Journal of Machine Tools and Manufacture , 2003, vol. 43, iss. 8, pp. 833–844. DOI: 10.1016/S0890-6955(03)00059-2. 22. Khara J., Sheladiya M.V., Acharya G.D. Machining parameters optimization of AISI 4340. IUP Journal of Mechanical Engineering , 2019, vol. 12, iss. 2, pp. 43–64. Con fl icts of Interest The authors declare no con fl ict of interest.  2020 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0) .

RkJQdWJsaXNoZXIy MTk0ODM1