Multiphase Cu-Ti Coatings coated by Plasma Vacuum-Arc deposition on Cu-Be Alloy С17200

OBRABOTKAMETALLOV Vol. 22 No. 4 2020 149 MATERIAL SCIENCE References 1. Tebyakin A.V., Fokanov A.N., Podurazhnaya V.F. Mnogofunktsional’nye mednye splavy [Multifunctional copper alloys]. Trudy VIAM = Proceedings of VIAM , 2016, vol. 12 (48), pp. 37–44. DOI: 10.18577/2307-6046- 2016-0-12-5-5. 2. Khodabakhshi A., Abouei V., Mortazavi N., Razavi S.H., Hooshyar H., Esmaily M. Effects of cold working and heat treatment onmicrostructure and wear behaviour of Cu-Be alloyC17200. Tribology – Materials, Surfaces & Interfaces , 2015, vol. 9, iss. 3, pp. 118–127. DOI: 10.1080/17515831.2015.1107257. 3. Straffelini G., Maines L., Pellizzari M., Scardi P. Dry sliding wear of Cu-Be alloys. Wear , 2005, vol. 259, pp. 506–511. DOI: 10.1016/j.wear.2004.11.013. 4. Zhu Y.D., Yan M.F., Zhang Y.X., Zhang C.S. Surface modi fi cation of C17200 copper-beryllium alloy by plasma nitriding of Cu-Ti gradient fi lm. Journal of Materials Engineering and Performance , 2018, vol. 27, iss. 3, pp. 961–969. DOI: 10.1007/s11665-018-3190-4. 5. Yan M.F., Zhu Y.D., Zhang C.S., Zhang Y.X., Wang Y.X., Yang L. Microstructure and mechanical properties of copper-titanium-nitrogen multiphase layers produced by a duplex treatment on C17200 copper-beryllium alloy. Materials and Design , 2015, vol. 84, pp. 10–17. DOI: 10.1016/j.matdes.2015.06.130. 6. Zhu Y.D., Yao J.W., Yan M.F., Zhang Y.X., Wang Y.X., Yang Y., Yang L. High temperature plasma nitriding to modify Ti coated C17200 Cu surface: microstructure and tribological properties. Vacuum , 2018, vol. 147, pp. 163–171. DOI: 10.1016/j.vacuum.2017.10.011. 7. Li M., Chao M., Liang E., Yu J., Zhang J., Li D. Improving wear resistance of pure copper by laser surface modi fi cation. Applied Surface Science , 2011, vol. 258, pp. 1599–1604. DOI: 10.1016/j.apsusc.2011.10.006. 8. Bateni M.R., Ashra fi zadeh F., Szpunar J.A., Drew R.A.L. Improving the tribological behavior of copper through novel Ti-Cu intermetallic coatings. Wear , 2002, vol. 253, pp. 626–639. DOI: 10.1016/S0043- 1648(02)00143-6. 9. Belyi A.V., Kukareko V.A., Rubtsov V.E., Kolubaev A.V. High-current density ion implantation and its in fl uence on shear deformation and wear resistance of materials. Fizicheskaya mezomekhanika = Physical Mesomechanics , 2002, vol. 5, iss. 1, p. 51–57. (In Russian). 10. Li Y., Ye Q., Zhu Y., Zhang L., He Y., Zhang S., Xiu J. Microstructure, adhesion and tribological properties of CrN/CrTiAlSiN/ WCrTiAlN multilayer coatings deposited on nitrocarburized AISI 4140 steel. Surface and Coatings Technology , 2019, vol. 362, pp. 27–34. DOI: 10.1016/j.surfcoat.2019.01.091. 11. HuangX., Etsion I., ShaoT. Effects of elasticmodulus mismatch between coating and substrate on the friction and wear properties of TiN and TiAlN coating systems. Wear , 2015, vol. 338–339, pp. 54–61. DOI: 10.1016/j. wear.2015.05.016. 12. Zhang X., Tian X.-B., Zhao Z.-W., Gao J.-B., Zhou Y.-W., Gao P., Guo Y.-Y., Lv Z. Evaluation of the adhesion and failure mechanism of the hard CrN coatings on different substrates. Surface and Coatings Technology , 2019, vol. 364, pp. 135–143. DOI: 10.1016/j.surfcoat.2019.01.059. 13. Kim G.S., Lee S.Y., Hahn J.H., Lee B.Y., Han J.G., Lee J.H., Lee S.Y. Effects of the thickness of Ti buffer layer on the mechanical properties of TiN coatings. Surface and Coatings Technology , 2003, vol. 171, iss. 1–3, pp. 83–90. DOI: 10.1016/S0257-8972(03)00243-3. 14. Yang L., Zhang F.Y., Yan M.F., Zhang M.L. Microstructure and mechanical properties of multiphase layer formed during thermo-diffusing of titanium into the surface of C17200 copper–beryllium alloy. Applied Surface Science , 2014, vol. 292, pp. 225–230. DOI: 10.1016/j.apsusc.2013.11.121. 15. Liu L., Shen H.H., Liu X.Z., Guo Q., Meng T.X., Wang Z.X., Yang H.J., Liu X.P. Wear resistance of TiN(Ti2N)/Ti composite layer formed on C17200 alloy. Applied Surface Science , 2016, vol. 388, pp. 103–108. DOI: 10.1016/j.apsusc.2016.03.059. 16. Yan M.F., Zhu Y.D., Zhang Y.X., Zhang M.L. Combining thermo-diffusing titanium and plasma nitriding to modify C61900 Cu-Al alloy. Vacuum , 2016, vol. 126, pp. 41–44. DOI: 10.1016/j.vacuum.2016.01.015. 17. Xi W., Ding W., Yu S., Lin N., Meng T., Guo Q., Liu X., Liu X. Corrosion behavior of TaC/Ta composite coatings on C17200 alloy by plasma surface alloying and CVD carburizing. Surface and Coatings Technology , 2019, vol. 359, pp. 426–432. DOI: 10.1016/j.surfcoat.2018.12.074.