Determination of temperature of maximum operability of replaceable cutting hard-alloy inserts based on study of electromagnetic properties change

OBRABOTKAMETALLOV Vol. 23 No. 1 2021 44 TECHNOLOGY the basis of change of electromagnetic properties of hard alloys]. Kontrol’. Diagnostika = Testing. Diagnostics , 2018, no. 12, pp. 54–57. 20. Artamonov E.V., Tveryakov A.M., Shtin A.S. Opredelenie temperatury maksimal’noi rabotosposobnosti instrumental’nykh tverdykh splavov [Determination of temperature of maximum working capacity of tool hard alloys]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2018, vol. 20, no. 3, pp. 47–57. DOI: 10.17212/1994-6309-2018-20.3-47-57. 21. Vereshchaka A.S. Rabotosposobnost’ rezhushchego instrumenta s iznosostoikimi pokrytiyami [Operability of cutting tool with wear-resistant coatings]. Moscow, Mashinostroenie Publ., 1993. 336 p. ISBN 5-217-01482-2. 22. Artamonov E.V., TveryakovA.M., ShtinA.S. Razrabotka elementov ustanovki dlya opredeleniya temperatury maksimal’noi rabotosposobnosti rezhushchikh elementov iz tverdykh splavov [Development of installation elements for determination of temperature of maximum operability of cutting elements from hard alloys]. Transport i mashinostroenie Zapadnoi Sibiri = Transport and Mechanical Engineering of West Siberia , 2018, no. 1, pp. 31–38. 23. Srithar A., Palanikumar K., Durgaprasad B. Experimental investigation and surface roughness analysis on hard turning of AISI D2 steel using coated Carbide insert. Procedia Engineering , 2014, vol. 97, pp. 72–77. DOI: 10.1016/j.proeng.2014.12.226. Con fl icts of Interest The authors declare no con fl ict of interest.  2021 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/ ).