Evaluation of the level of hardening of aluminum alloy chips intended for subsequent pressure treatment

OBRABOTKAMETALLOV Vol. 23 No. 1 2021 TECHNOLOGY 14. Fan X., Suo T., Sun Q., Wang T. Dynamic mechanical behavior of 6061 Al alloy at elevated temperature sand different strain rates. Acta Mechanica Solida Sinica , 2013, vol. 26, iss. 2, pp. 111–120. DOI: 10.1016/S0894- 9166(13)60011-7. 15. Tucker M.T., Horstemeyer M.F., Whittington W.R., Solanki K.N., Gullett P.M. The effect of varying strain rates and stress states on the plasticity, damage, and fracture of aluminum alloys. Mechanics of Materials , 2010, vol. 42, pp. 895–907. DOI: 10.1016/j.mechmat.2010.07.003. 16. ChenY., ClausenA.H., Hopperstad O.S., Langseth M. Stress–strain behaviour of aluminium alloys at a wide range of strain rates. International Journal of Solids and Structures , 2009, vol. 46, pp. 3825–3835. DOI: 10.1016/j. ijsolstr.2009.07.013. 17. Pan H., Liu J., Choi Y., Xu C., Bai Y., Atkins T. Zones of material separation in simulations of cutting. Inter- national Journal of Mechanical Sciences , 2016, vol. 115–116, pp. 262–279. DOI: 10.1016/j.ijmecsci.2016.06.019. 18. Mabrouki T., Courbon C., Zhang Y., Rech J., Nélias D., Asad M. Some insights on the modelling of chip formation and its morphology during metal cutting operations. Comptes Rendus Mecanique , 2016, vol. 344 (4), pp. 335–354. DOI: 10.1016/j.crme.2016.02.003. 19. Denguir L.A., Outeiro J.C., Fromentin G., Vignal V., Besnard R. Orthogonal cutting simulation of OFHC copper using a new constitutive model considering the state of stress and the microstructure effects. Procedia CIRP , 2016, vol. 46, pp. 238–241. DOI: 10.1016/j.procir.2016.03.208. 20. Kolpashnikov A.I. Prokatka listov iz legkikh splavov [Rolling of light alloy sheets]. Moscow, Metallurgiya Publ., 1979. 264 p. 21. Zagirov N.N., Loginov Y.N., Sidel’nikov S.B., Ivanov E.V. Alternative technology for manufacturing rod– wire products from AK12 silumin. Metallurgist , 2018, vol. 62 (5–6), pp. 587–596. DOI: 10.1007/s11015-018- 0696-9. Con fl icts of Interest The authors declare no con fl ict of interest.  2021 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/ ).