Evaluation of the influence of the reaction rate of the thermodynamic subsystem on the dynamics of the cutting process in metalworking

OBRABOTKAMETALLOV Vol. 23 No. 2 2021 29 TECHNOLOGY 4. Ryzhkin A.A. Teplo fi zicheskie protsessy pri iznashivanii instrumental’nykh rezhushchikh materialov [Thermophysical processes during wear of tool cutting materials]. Rostov-on-Don, DSTU Publ., 2005. 311 p. ISBN 5-7890-0348-6. 5. Huang S.N., Tan K.K., Wong Y.S., De Silva C.W., Goh H.L., Tan W.W. Tool wear detection and fault diagnosis based on cutting force monitoring. International Journal of Machine Tools and Manufacture , 2007, vol. 47, iss. 3–4, pp. 444–451. 6. Arsla H., Er A.O., Orhan S., Aslan E. Tool condition monitoring in turning using statistical parameters of vibration signal. International journal of acoustics and vibration , 2016, vol. 21, iss. 4, pp. 371–378. 7. Alonso F.J., Salgado D.R. Application of singular spectrum analysis to tool wear detection using sound signals. Proceedings of the Institution of Mechanical Engineers , Part B: Journal of Engineering Manufacture , 2005, vol. 219 (9), pp. 703–710. 8. Dimla Sr D.E., Lister P.M. On-line metal cutting tool condition monitoring. I: force and vibration analyses. International Journal of Machine Tools and Manufacture , 2000, vol. 40 (5), pp. 739–768. DOI: 10.1016/S0890- 6955(99)00084-X. 9. Orhan S., Er A.O., Camu ş cu N., Aslan E. Tool wear evaluation by vibration analysis during end milling of AISI D3 cold work tool steel with 35 HRC hardness. NDT & E International , 2007, vol. 40 (2), pp. 121–126. 10. Tobias S.A. Vibraciones en Máquinas-Herramientas [Machine tools vibrations]. Bilboa, Spain, Ediciones Urmo, 1961. 11. Sri Namachchivaya, Beddini. Spindle speed variation for the suppression of regenerative chatter. Journal of Nonlinear Science , 2003, vol. 13, no. 3, pp. 265–288. DOI: 10.1007/s00332-003-0518-4. 12. Wahi P., Chatterjee A. Regenerative tool chatter near a codimension 2 Hopf point using multiple scales. Non- linear Dynamics , 2005, vol. 40, no. 4, pp. 323–338. 13. Stépán G., Insperger T., Szalai R. Delay, parametric excitation, and the nonlinear dynamics of cutting processes. International Journal of Bifurcation and Chaos , 2005, vol. 15, no 9, pp. 2783–2798. DOI: 10.1142/ S0218127405013642. 14. Moradi H., Bakhtiari-Nejad F., Movahhedy M.R., Ahmadian M.T. Nonlinear behaviour of the regenerative chatter in turning process with a worn tool: Forced oscillation and stability analysis. Mechanism and Machine Theo- ry , 2010, vol. 45, no. 8, pp. 1050–1066. DOI: 10.1016/j.mechmachtheory.2010.03.014. 15. Gouskov A.M., Voronov S.A., Paris H., Batzer S.A. Nonlinear dynamics of a machining system with two in- terdependent delays. Communications in Nonlinear Science and Numerical Simulation , 2002, vol. 7, no. 4, pp. 207– 221. DOI: 10.1016/S1007-5704(02)00014-X. 16. Hahn R.S. On the theory of regenerative chatter in precision grinding operation. Transactions of American Society of Mechanical Engineers , 1954, vol. 76, pp. 356–260. 17. Tobias S.A., Fishwick W. Theory of regenerative machine tool chatter. The Engineer , 1958, vol. 205, no. 7, pp. 199–203. 18. Merritt H.E. Theory of self-excited machine-tool chatter: contribution to machine-tool chatter research. Jour- nal of Engineering for Industry , 1965, vol. 87, pp. 447–454. DOI: 10.1115/1.3670861. 19. Balachandran B. Nonlinear dynamics of milling process. Philosophical Transactions of The Royal Society A: Mathematical Physical and Engineering Sciences , 2001, vol. 359 (1781), pp. 793–819. 20. Stepan G. Modelling nonlinear regenerative efects in metal cutting. Philosophical Transactions of The Royal Society A: Mathematical Physical and Engineering Sciences , 2001, vol. 359, pp. 739–757. DOI: 10.1098/ rsta.2000.07537. 21. Litak G. Chaotic vibrations in a regenerative cutting process. Chaos Solitons and Fractals , 2002, vol. 13, pp. 1531–1535. DOI: 10.1016/S0960-0779(01)00176-X. 22. Guskov A.M., Voronov S.A., Kvashnin A.S. Vliyanie krutil’nykh kolebanii na protsess vibrosverleniya [In- fl uence of torsion vibrations on process of vibration-drilling]. Vestnik MGTU im. N.E. Baumana. Seriya: Mashi- nostroenie = Herald of the Bauman Moscow State Technical University. Series: Mechanical Engineering , 2007, no. 1 (66), pp. 3–19. 23. Vasin S.A., Vasin L.A. Sinergeticheskii podkhod k opisaniyu prirody vozniknoveniya i razvitiya avtokolebanii pri tochenii [Synergetic approach to describing the nature and development of self-oscillations in turning]. Naukoemkie tekhnologii v mashinostroenii = Science Intensive Technologies in Mechanical Engineering , 2012, no. 1, pp. 11–16. 24. Voronin A.A. Vliyanie ul’trazvukovykh kolebanii na protsess rezaniya zharoprochnykh splavov [In fl uence of ultrasonic vibrations on the cutting process of heat-resistant alloys]. Stanki i instrument = Machines and Tools , 1960, no. 11, pp. 15–18.