Evaluation of the influence of the reaction rate of the thermodynamic subsystem on the dynamics of the cutting process in metalworking

OBRABOTKAMETALLOV Vol. 23 No. 2 2021 TECHNOLOGY 11. Sri Namachchivaya, Beddini. Spindle speed variation for the suppression of regenerative chatter. Journal of Nonlinear Science , 2003, vol. 13, no. 3, pp. 265–288. DOI: 10.1007/s00332-003-0518-4. 12. Wahi P., Chatterjee A. Regenerative tool chatter near a codimension 2 Hopf point using multiple scales. Non- linear Dynamics , 2005, vol. 40, no. 4, pp. 323–338. 13. Stépán G., Insperger T., Szalai R. Delay, parametric excitation, and the nonlinear dynamics of cutting processes. International Journal of Bifurcation and Chaos , 2005, vol. 15, no 9, pp. 2783–2798. DOI: 10.1142/ S0218127405013642. 14. Moradi H., Bakhtiari-Nejad F., Movahhedy M.R., Ahmadian M.T. Nonlinear behaviour of the regenerative chatter in turning process with a worn tool: Forced oscillation and stability analysis. Mechanism and Machine Theo- ry , 2010, vol. 45, no. 8, pp. 1050–1066. DOI: 10.1016/j.mechmachtheory.2010.03.014. 15. Gouskov A.M., Voronov S.A., Paris H., Batzer S.A. Nonlinear dynamics of a machining system with two in- terdependent delays. Communications in Nonlinear Science and Numerical Simulation , 2002, vol. 7, no. 4, pp. 207– 221. DOI: 10.1016/S1007-5704(02)00014-X. 16. Hahn R.S. On the theory of regenerative chatter in precision grinding operation. Transactions of American Society of Mechanical Engineers , 1954, vol. 76, pp. 356–260. 17. Tobias S.A., Fishwick W. Theory of regenerative machine tool chatter. The Engineer , 1958, vol. 205, no. 7, pp. 199–203. 18. Merritt H.E. Theory of self-excited machine-tool chatter: contribution to machine-tool chatter research. Jour- nal of Engineering for Industry , 1965, vol. 87, pp. 447–454. DOI: 10.1115/1.3670861. 19. Balachandran B. Nonlinear dynamics of milling process. Philosophical Transactions of The Royal Society A: Mathematical Physical and Engineering Sciences , 2001, vol. 359 (1781), pp. 793–819. 20. Stepan G. Modelling nonlinear regenerative efects in metal cutting. Philosophical Transactions of The Royal Society A: Mathematical Physical and Engineering Sciences , 2001, vol. 359, pp. 739–757. DOI: 10.1098/ rsta.2000.07537. 21. Litak G. Chaotic vibrations in a regenerative cutting process. Chaos Solitons and Fractals , 2002, vol. 13, pp. 1531–1535. DOI: 10.1016/S0960-0779(01)00176-X. 22. Guskov A.M., Voronov S.A., Kvashnin A.S. Vliyanie krutil’nykh kolebanii na protsess vibrosverleniya [In- fl uence of torsion vibrations on process of vibration-drilling]. Vestnik MGTU im. N.E. Baumana. Seriya: Mashi- nostroenie = Herald of the Bauman Moscow State Technical University. Series: Mechanical Engineering , 2007, no. 1 (66), pp. 3–19. 23. Vasin S.A., Vasin L.A. Sinergeticheskii podkhod k opisaniyu prirody vozniknoveniya i razvitiya avtokolebanii pri tochenii [Synergetic approach to describing the nature and development of self-oscillations in turning]. Naukoemkie tekhnologii v mashinostroenii = Science Intensive Technologies in Mechanical Engineering , 2012, no. 1, pp. 11–16. 24. Voronin A.A. Vliyanie ul’trazvukovykh kolebanii na protsess rezaniya zharoprochnykh splavov [In fl uence of ultrasonic vibrations on the cutting process of heat-resistant alloys]. Stanki i instrument = Machines and Tools , 1960, no. 11, pp. 15–18. 25. Zakovorotny V.L., Lukyanov A.D., Gubanova A.A., Khristoforova V.V. Bifurcation of stationary manifolds formed in the neighborhood of the equilibrium in a dynamic system of cutting. Journal of Sound and Vibration , 2016, vol. 368, pp. 174–190. DOI: 10.1016/j.jsv.2016.01.020. 26. Zakovorotny V.L., Lapshin V.P., Babenko T.S. Modeling of tool wear: irreversible energy transformations. Russian Engineering Research , 2018, vol. 38, no. 9, pp. 707–708. 27. Zharkov I.G. Vibratsii pri obrabotke lezviinym instrumentom [Vibrations when processing with a blade tool]. Leningrad, Mashinostroenie Publ., 1986. 184 p. 28. Markov A.I. Ul’trazvukovoe rezanie trudnoobrabatyvaemykh materialov [Ultrasonic cutting of hard-to- process materials]. Moscow, Mashinostroenie Publ., 1968. 367 p. 29. Makarov A.D. Optimizatsiya protsessov rezaniya [Optimization of cutting processes]. Moscow, Mashinostroenie Publ., 1976. 278 p. 30. Zakovorotny V.L., Flek M.B. Dinamika protsessa rezaniya. Sinergeticheskii podkhod [Dynamics of the cutting process. Synergetic approach]. Rostov-on-Don, Terra Publ., 2006. 880 p. ISBN 5-98254-055-2. 31. Ryzhkin A.A. Sinergetika iznashivaniya instrumental’nykh rezhushchikh materialov (triboelektricheskii aspekt) [Synergetics of wear of tool cutting materials (triboelectric aspect)]. Rostov-on-Don, DSTU Publ., 2004. 323 p. ISBN 5-7890-0307-9. 32. Lapshin V.P., Turkin I.A., Khristoforova V.V., Babenko T.S. In fl uence of the temperature in the tool–workpiece contact zone on the deformational dynamics in turning. Russian Engineering Research , 2020, vol. 40, no. 3, pp. 259–265.