Evaluation of the influence of the reaction rate of the thermodynamic subsystem on the dynamics of the cutting process in metalworking

OBRABOTKAMETALLOV Vol. 23 No. 2 2021 TECHNOLOGY 33. Bordachev E.V., Lapshin V.P. Matematicheskoe modelirovanie temperatury v zone kontakta instrumenta i izdeliya pri tokarnoi obrabotke metallov [Mathematical modeling of the temperature in the contact zone of the tool and product during metal turning]. Vestnik Donskogo gosudarstvennogo tekhnicheskogo universiteta = Vestnik of Don State Technical University , 2019, vol. 19, no. 2, pp. 130–137. DOI: 10.23047/1992-5980-2019-19-2-130-137. 34. Lapshin V.P., Khristoforova V.V., Nosachev S.V. Vzaimosvyaz’ temperatury i sily rezaniya s iznosom i vibratsiyami instrumenta pri tokarnoi obrabotke metallov [Relationship of temperature and cutting force with tool wear and vibration in metal turning]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2020, vol. 22, no. 3, pp. 44–58. DOI: 10.17212/1994-6309-2020-22.3-44-58. Con fl icts of Interest The authors declare no con fl ict of interest.  2021 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/ ).