Simulation of the stock removal in the contact zone during internal grinding of brittle non-metallic materials

OBRABOTKAMETALLOV Vol. 23 No. 2 2021 technology 19. Lobanov D.V., Yanyushkin A.S., Arkhipov P.V. Napryazhenno-deformirovannoe sostoyanie tverdosplavnykh rezhushchikh elementov pri almaznom zatachivanii [Stress-strain state of carbide cutting elements during diamond sharpening]. Vektor nauki Tol’yattinskogo gosudarstvennogo universiteta = Vector of sciences. Togliatti State University, 2015, no. 3-1 (33-1). pp. 85–91. DOI: 10.18323/2073-5073-2015-3-85-91. 20. Kassen G., Werner G. Kinematische Kenngrößen des Schleifvorganges [Kinematic parameters of the grinding process]. Industrie-Anzeiger = Industry scoreboard, 1969, no. 87, pp. 91–95. (In German). 21. Bratan S., Roshchupkin S., Kolesov A., Bogutsky B. Identification of removal parameters at combined grinding of conductive ceramic materials. MATEC Web of Conferences, 2017, vol. 129, p. 01079. DOI: 10.1051/ matecconf/201712901079. 22. Gusev V.V., Moiseev D.A. Iznos almaznogo shlifoval’nogo kruga pri obrabotke keramiki [Wear of a diamond grinding wheel when processing ceramics]. Progressivnye tekhnologii i sistemy mashinostroeniya = Progressive Technologies and Systems of Mechanical Engineering, 2019, no. 4 (67), pp. 25–29. (In Russian). 23. Novoselov Yu., Bratan S., Bogutsky B. Analysis of relation between grinding wheel wear and abrasive grains wear. Procedia Engineering, 2016, vol. 150, pp. 809–814. DOI: 10.1016/j.proeng.2016.07.116. Conflicts of Interest The authors declare no conflict of interest.  2021 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/) .