Features of structure formation processes in AA2024 alloy joints formed by the friction stir welding with bobbin tool

OBRABOTKAMETALLOV MATERIAL SCIENCE Vol. 23 No. 2 2021 2. Fuse K., Badheka V. Bobbin tool friction stir welding: a review. Science and Technology of Welding and Joining , 2019, vol. 24 (4), pp. 277–304. DOI: 10.1080/13621718.2018.1553655. 3. Imam M., Sun Y., Fujii H., Ma N., Tsutsumi S., Murakawa H. Microstructural characteristics and mechanical properties of friction stir welded thick 5083 aluminum alloy. Metallurgical and Materials Transactions A , 2017, vol. 48, pp. 208–229. DOI: 10.1007/s11661-016-3819-6. 4. Liu X.M., Yao J.S., Cai Y., Meng H., Zou Z.D. Simulation on the temperature field of bobbin tool friction stir welding of AA 2014 aluminium alloy. Applied Mechanics and Materials , 2013, vol. 433–435, pp. 2091–2095. DOI: 10.4028 /www.scientific.net/AMM.433-435.2091. 5. Yang C., Ni D.R., Xue P., Xiao B.L., Wang W., Wang K.S., Ma Z.Y. A comparative research on bobbin tool and conventional friction stir welding of Al-Mg-Si alloy plates. Materials Characterization , 2018, vol. 145, pp. 20–28. DOI: 10.1016/j.matchar.2018.08.027. 6. EsmailyM.,MortazaviN., OsikowiczW., HindsefeltH., Svensson J.E., HalvarssonM.,Martin J., JohanssonL.G. Bobbin and conventional friction stir welding of thick extruded AA6005-T6 profiles. Materials and Design , 2016, vol. 108, pp. 114–125. DOI: 10.1016/j.matdes.2016.06.089. 7. Goebel J., Reimann M., Norma A., Dos Santos J.F. Semi-stationary shoulder bobbin tool friction stir welding of AA2198-T851. Journal of Materials Processing Technology , 2017, vol. 245, pp. 37–45. DOI: 10.1016/j. jmatprotec.2017.02.011. 8. Xu W., Luo Y., Zhang W., Fu M. Comparative study on local and global mechanical properties of bobbin tool and conventional friction stir welded 7085-T7452 aluminum thick plate. Journal of Materials Science and Technology , 2018, vol. 34, pp. 173–184. DOI: 10.1016/j.jmst.2017.05.015. 9. Milčić M., Burzić Z., Radisavljević I., Vuherer T., Milčić D., Grabulov V. Experimental investigation of fatigue properties of FSW in AA2024-T351. Procedia Structural Integrity , 2018, vol. 13, pp. 1977–1984. DOI: 10.1016/j. prostr.2018.12.220. 10. Eliseev A.A., Kalashnikova T.A., Gurianov D.A., Rubtsov V.E., Ivanov A.N., Kolubaev E.A. Ultrasonic assisted second phase transformations under severe plastic deformation in friction stir welding of AA2024. Materials Today Communications , 2019, vol. 21, p. 100660. DOI: 10.1016/j.mtcomm.2019.100660. 11. Dong J., Gao C., Lu Y., Han J., Jiao X., Zhu Z. Microstructural characteristics and mechanical properties of bobbin-tool friction stir welded 2024–T3 aluminum alloy. International Journal of Minerals, Metallurgy, and Materials , 2017, vol. 24, pp. 171–178. DOI: 10.1007/s12613-017-1392-7. 12. Ivanov A.N., Rubtsov V.E., Kolubaev E.A., Bakshaev V.A., Ivashkin I.N. Vliyanie rezhima svarki treniem s peremeshivaniem i ee napravleniya otnositel’no napravleniya prokatki splava D16 na strukturu i svoistva ego svarnykh soedinenii [Effect of friction stir welding mode and its direction relative to the rolling direction of 2024 alloy on the structure and mechanical properties of its weld joints]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2020, vol. 22, no. 4, pp. 110–123. DOI: 10.17212/1994-6309- 2020-22.4-110-123. 13. Li G.H., Zhou L., Luo S.F., Dong F.B., Guo N. Quality improvement of bobbin tool friction stir welds in Mg-Zn-Zr alloy by adjusting tool geometry. Journal of Materials Processing Technology , 2020, vol. 282, p. 116685. DOI: 10.1016/j.jmatprotec.2020.116685. 14. Wu D., Li W.Y., Gao Y.J., Yang J., Su Y., Wen Q., Vairis A. Effect of an improved pin design on weld formability and mechanical properties of adjustable-gap bobbin-tool friction stir welded Al-Cu aluminum alloy joints. Journal of Manufacturing Processes , 2020, vol. 58, pp. 1182–1188. DOI: 10.1016/j.jmapro.2020.09.015. 15. Zhang H., Wang M., Zhang X., Yang G. Microstructural characteristics and mechanical properties of bobbin tool friction stir welded 2A14-T6 aluminum. Materials and Design , 2015, vol. 65, pp. 559–566. DOI: 10.1016/j. matdes.2014.09.068. 16. Li G., Zhou L., Zhang J., Luo S., Guo N. Macrostructure, microstructure and mechanical properties of bobbin tool friction stir welded ZK60 Mg alloy joints. Journal of Materials Research and Technology , 2020, vol. 9, iss. 4, pp. 9348–9361. DOI: 10.1016/j.jmrt.2020.05.067. 17. Chen S., Li H., Lu S., Ni R., Dong J. Temperature measurement and control of bobbin tool friction stir welding. The International Journal of Advanced Manufacturing Technology , 2016, vol. 86, pp. 337–346. DOI: 10.1007/ s00170-015-8116-9. 18. Tamadon A., Pons D.J., Clucas D. Structural anatomy of tunnel void defect in bobbin friction stir welding, elucidated by the analogue modelling. Applied System Innovation , 2020, vol. 3, p. 2. DOI: 10.3390/asi3010002. 19. Tamadon A., Pons D.J., Clucas D., Sued K. Internal material flow layers in AA6082-T6 butt-joints during bobbin friction stir welding. Metals , 2019, vol. 9, p. 1059. DOI: 10.3390/met9101059.