Calculation of radial material removal and the thickness of the layer with the current roughness when grinding brittle non-metallic materials

OBRABOTKAMETALLOV Vol. 23 No. 3 2021 technology 17. Gusev V.V., Moiseyev D.A. Iznos almaznogo shlifoval’nogo kruga pri obrabotke keramiki [Wear of a diamond grinding wheel when processing ceramics]. Progressivnye tekhnologii i sistemy mashinostroeniya = Progressive Technologies and Systems of Mechanical Engineering , 2019, no. 4 (67), pp. 25–29. 18. Bratan S.M., Roshchupkin S.I., Kharchenko A.O., Chasovitina A.S. Veroyatnostnaya model’ udaleniya poverkhnostnogo sloya pri shlifovanii khrupkikh nemetallicheskikh materialov [Probabilistic model of surface layer removal when grinding brittle non-metallicmaterials]. Obrabotkametallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2021, vol. 23, no. 2, pp. 6–16. DOI: 10.17212/1994-6309-2021-23.2-6-16. 19. Bratan S.M., Roshchupkin S.I., Kharchenko A.O., Chasovitina A.S. Modelirovanie s”ema pripuska v zone kontakta pri vnutrennem shlifovanii khrupkikh nemetallicheskikh materialov [Simulation of the stock removal in the contact zone during internal grinding of brittle non-metallic materials]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2021, vol. 23, no. 2, pp. 31–39. DOI: 10.17212/1994-6309-2021-23.2-31-39. 20. Bratan S., Roshchupkin S., Kolesov A., Bogutsky B. Identification of removal parameters at combined grinding of conductive ceramic materials. MATEC Web of Conferences , 2017, vol. 129, p. 01079. DOI: 10.1051/ matecconf/201712901079. Conflicts of Interest The authors declare no conflict of interest.  2021 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/) .