Synergetic approach to improve the efficiency of machining process control on metal-cutting machines

OBRABOTKAMETALLOV Vol. 23 No. 3 2021 MATERIAL SCIENCE EQUIPMENT. INSTRUMENTS 43. Drachev O.I. Sistema avtomaticheskogo upravleniya ekspluatatsionnoi tochnost’yu dlinnomernykh valov [System of automatic control of operational accuracy of long-length shafts]. Izvestiya Volgogradskogo gosudarstven- nogo tekhnicheskogo universiteta = Izvestia of Volgograd State Technical University , 2017, no. 5 (200), pp. 18–20. 44. Kazakov A.V., Zholobov A.A. Prognozirovanie i obespechenie tochnosti tokarnoi obrabotki stupenchatykh valov [Forecasting and ensuring the accuracy of stepped shafts turning]. Vestnik Belorussko-Rossiiskogo universiteta = Bulletin of the Belarusian-Russian University , 2014, no. 1 (42), pp. 6–14. 45. Kudinov V.A. Dinamika stankov [Dynamics of machine tools]. Moscow, Mashinostroenie Publ., 1967. 359 p. 46. Voronov S.A., Kiselev I.A. Nelineinye zadachi dinamiki protsessov rezaniya [Nonlinear problems of cutting process dynamics]. Mashinostroenie i inzhenernoe obrazovanie = Mechanical engineering and engineering educa- tion , 2017, no. 2 (51), pp. 9–23. 47. Gouskov A.M., Voronov S.A., Paris H., Batzer S.A. Nonlinear dynamics of a machining system with two interdependent delays. Communications in Nonlinear Science and Numerical Simulation , 2002, vol. 7, pp. 207–221. DOI: 10.1016/s1007-5704(02)00014-x. 48. Kao Y.-C., Nguyen N.-T., Chen M.-S., Su S.T. A prediction method of cutting force coefficients with helix angle of flat-end cutter and its application in a virtual three-axis milling simulation system. The International Journal of Advanced Manufacturing Technology , 2015, vol. 77, no. 9–12, рр. 1793–1809. DOI: 10.1007/s00170-014-6550-8. 49. Stepan G., Insperge T., Szalai R. Delay, parametric excitation, and the nonlinear dynamics of cutting processes. International Journal of Bifurcation and Chaos , 2005, vol. 15, no. 9, pp. 2783–2798. DOI: 10.1142/ S0218127405013642. 50. Corpus W.T., Endres W.J. Added stability lobes in machining processes that exhibit periodic time variation – Part 1: An analytical solution. Journal of Manufacturing Science and Engineering , 2004, vol. 126, pp. 467–474. DOI: 10.1115/1.1765137. 51. Peigne G., Paris H., Brissaud D., Gouskov A. Impact of the cutting dynamics of small radial immersion milling operations on machined surface roughness. International Journal of Machine Tools and Manufacture , 2004, vol. 44, pp. 1133–1142. DOI: 10.1016/j.ijmachtools.2004.04.012. 52. Hasnul H., Tajul L., Zailani Z.A., Hamzas M.F.M.A., Hussin M.S. The parametric effect and optimization on JIS S45C steel turning. International Journal of Engineering Science and Technology , 2011, vol. 3, no. 5, pp. 4479–4487. 53. Rusinek R., Wiercigroch M., Wahi P. Influence of tool flank forces on complex dynamics of a cutting process International Journal of Bifurcation and Chaos , 2014, 24 (9), pp. 189– 201. DOI: 10.1142/S0218127414501156. 54. Rusinek R., Wiercigroch M., Wahi P. Modeling of frictional chatter in metal cutting. International Journal of Mechanical Sciences , 2014, vol. 89, pp. 167–176. DOI: /10.1016/j.ijmecsci.2014.08.020. 55. Zakovorotny V.L., Gvindjiliya V.E. Svyaz’ samoorganizatsii dinamicheskoi sistemy rezaniya s iznashivaniem instrumenta [Link between the self-organization of dynamic cutting system and tool wear]. Izvestiya vysshikh ucheb- nykh zavedenii. Prikladnaya nelineinaya dinamika = Izvestiya VUZ. Applied Nonlinear Dynamics , 2020, vol. 28, no. 1, pp. 46–61. DOI: 10.18500/0869-6632-2020-28-1-46-61. 56. Zakovorotny V.L., Gvindjiliya V.E. Bifurkatsii prityagivayushchikh mnozhestv deformatsionnykh smeshche- nii rezhushchego instrumenta v khode evolyutsii svoistv protsessa obrabotki [Bifurcations of attracting sets of cut- ting tool deformation displacements at the evolution of treatment process properties]. Izvestiya vysshikh uchebnykh zavedenii. Prikladnaya nelineinaya dinamika = Izvestiya VUZ. Applied Nonlinear Dynamics , 2018, vol. 26, no. 5, pp. 20–38. DOI: 10.18500/0869-6632-2018-26-5-20-38. 57. Lapshin V.P., Turkin I.A., Khristoforova V.V. Аssessment of metal wear in turning on the basis of components of the cutting force. Russian Engineering Research , 2020, vol. 40, no. 9, pp. 797–800. 58. Zakovorotny V.L., Gvindjiliya V.E. Vliyanie dinamiki rezaniya na vybor tekhnologicheskikh rezhimov, obespechivayushchikh minimal’noe iznashivanie rezhushchikh instrumentov [Influence of cutting dynamic on the selection of the technological regimes to ensure minimal wear of cutting tools]. Obrabotka metallov (tekh- nologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2020, vol. 22, no. 4, pp. 54–70. DOI: 10.17212/1994-6309-2020-22.4-54-70. Conflicts of Interest The authors declare no conflict of interest.  2021 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/) .

RkJQdWJsaXNoZXIy MTk0ODM1