Low energy mechanical treatment of non-stoichiometric titanium carbide powder

OBRABOTKAMETALLOV MATERIAL SCIENCE Vol. 23 No. 3 2021 18. Zhang H., Li F., Jia Q., Ye G. Preparation of titanium carbide powders by sol–gel and microwave carbothermal reduction methods at low temperature. Journal of Sol-Gel Science and Technology , 2008, vol. 46, pp. 217–222. DOI: 10.1007/s10971-008-1697-0. 19. Dyjak S., Norek M., Polański M., Cudziło S., Bystrzycki J. A simple method of synthesis and surface purification of titanium carbide powder. International Journal of Refractory Metals and Hard Materials , 2013, vol. 38, pp. 87–91. DOI: 10.1016/j.ijrmhm.2013.01.004. 20. Fu Z., Koc R. Pressureless sintering of submicron titanium carbide powders. Ceramics International , 2017, vol. 43, iss. 18, pp. 17233–17237. DOI: 10.1016/j.ceramint.2017.09.050. 21. Tong L., Reddy R.G. Synthesis of titanium carbide nano-powders by thermal plasma. Scripta Materialia , 2005, vol. 52, iss. 12, pp. 1253–1258. DOI: 10.1016/j.scriptamat.2005.02.033. 22. SenW., Sun H., Yang B., Xu B., MaW., Liu D., DaiY. Preparation of titanium carbide powders by carbothermal reduction of titania/charcoal at vacuum condition. International Journal of Refractory Metals and Hard Materials , 2010, vol. 28, iss. 5, pp. 628–632. DOI: 10.1016/j.ijrmhm.2010.06.005. 23. Lipatnikov V.N., Kottar A., Zueva L.V., Gusev A.I. Fazovye prevrashcheniya besporyadok-poryadok i elektrosoprotivlenie nestekhiometricheskogo karbida titana [Disorder-order phase transformations and electrical resistivity of nonstoichiometric titanium carbide]. Fizika tverdogo tela = Physics of the Solid State , 1998, vol. 40, no. 7, pp. 1332–1340. (In Russian). 24. Kiparisov S.S., Levinskii Yu.V., Petrov A.P. Karbid titana: poluchenie, svoistva, primenenie [Titanium carbide: preparation, properties, application] . Moscow, Metallurgiya Publ., 1987. 215 p. 25. Kurlov A.S., Gusev A.I. High-energy milling of nonstoichiometric carbides: effect of nonstoichiometry on particle size of nanopowders. Journal of Alloys and Compounds , 2014, vol. 582, pp. 108–118. DOI: 10.1016/j. jallcom.2013.08.008. 26. Gorbacheva T.B. Rentgenografiya tverdykh splavov [X-ray of hard alloys] . Moscow, Metallurgiya Publ., 1985. 205 p. 27. BuzimovA.Y., Eckl W., Gömze L.A., Kocserha I., KurovicsE., KulkovA.S., Kulkov S.N. Effect of mechanical treatment on properties of Si-Al-O zeolites. Építőanyag – Journal of Silicate Based and Composite Materials , 2018, vol. 70, iss. 1, pp. 23–26. DOI: 10.14382/epitoanyag-jsbcm.2018.5. 28. Ditenberg I.A., Tyumentsev A.N., Denisov K.I., Korchagin M.A. Peculiarities of the formation of high-defect states in mechanocomposites and powders of niobium and aluminum under severe deformation in planetary ball mills. Physical Mesomechanics , 2013, vol. 16, pp. 84–92. DOI: 10.1134/S1029959913010098. 29. Abdulmenova E.V., Kulkov S.N. Effect of mechanical activation of WC-based powder on the properties of sintered alloys. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2021, vol. 23, no. 1, pp. 68–78. DOI: 10.17212/1994-6309-2021-23.1-68-78. 30. Boldyrev V.V. Mechanochemistry and mechanical activation of solids. Russian chemical reviews , 2006, vol. 75, iss. 3, pp. 177–189. DOI: 10.1070/RC2006v075n03ABEH001205. 31. Urakaev F.K., Boldyrev V.V. Mechanism and kinetics of mechanochemical processes in comminuting devices. Powder Technology , 2000, vol. 107, iss. 1–2, pp. 93–107. DOI: 10.1016/s0032-5910(99)00175-8. 32. Scherrer P. Bestimmung der inneren Struktur und der Größe von Kolloidteilchen mittels Röntgenstrahlen. Kolloidchemie Ein Lehrbuch . Berlin, Heidelberg, Springer, 1912, pp. 387–409. DOI: 10.1007/978-3-662-33915-2_7. 33. Stokes A.R., Wilson A.J.C. The diffraction of X-rays by distorted crystal aggregates. Proceedings of the Physical Society , 1944, vol. 56 (3), pp. 174–181. DOI: 10.1088/0959-5309/56/3/303. 34. Saltykov S.A. Stereometricheskaya metallografiya [Stereometric metallography]. Moscow, Metallurgiya Publ., 1970. 376 p. 35. Xiong H., Li Z., Gan X., Chai L., Zhou K. High-energy ball-milling combined with annealing of TiC powders and its influence on the microstructure and mechanical properties of the TiC-based cermets. Materials Science and Engineering: A , 2017, vol. 694, pp. 33–40. DOI: 10.1016/j.msea.2017.03.092. 36. Xiong H., Li Z., Zhou K. TiC whisker reinforced ultra-fine TiC-based cermets: microstructure and mechanical properties. Ceramics International , 2016, vol. 42, iss. 6, pp. 6858–6867. DOI: 10.1016/j.ceramint.2016.01.069. 37. Grigor’ev M.V., Molchunova L.M., Buyakova S.P., Kul’kov S.N Vliyanie mekhanicheskoi obrabotki na strukturu i svoistva poroshka nestekhiometricheskogo karbida titana [Influence of the mechanical processing on the structure and properties of the nonstoichiometric titanium carbide powder]. Izvestiya vysshikh uchebnykh zavedenii. Fizika = Russian Physics Journal , 2013, vol. 56, no. 7-2, pp. 206–210.