Structural and mechanical properties of stainless steel formed under conditions of layer-by-layer fusion of a wire by an electron beam

OBRABOTKAMETALLOV Vol. 23 No. 4 2021 124 MATERIAL SCIENCE 10Ni steel]. Izvestiya vysshikh uchebnykh zavedenii. Chernaya metallurgiya = Izvestiya. Ferrous Metallurgy , 2021, vol. 64, pp. 217–229. DOI: 10.17073/0368-0797-2021-3-217-229. (In Russian). 19. Gong H., Ra fi K., Gu H., Janaki Ram G.D., Starr T., Stucker B. In fl uence of defects on mechanical properties of Ti-6Al-4V components produced by selective laser melting and electron beam melting. Materials and Design , 2015, vol. 86, pp. 545–554. DOI: 10.1016/j.matdes.2015.07.147. 20. Aleshin N.P., Grigo’rev M.V., Shchipakov N.A., Prilutskii M.A., Murashov V.V. Applying nondestructive testing to quality control of additive manufactured parts. Russian Journal of Nondestructive Testing , 2016, vol. 52, iss. 10, pp. 600–609. DOI: 10.1134/S1061830916100028. 21. Barberi F., Otani C., Lepienski C., Urruchi W., Maciel H., Petraconi G. Nanoindention study of Ti6Al4V alloy nitride by low intensity plasma jet process. Vacuum , 2002, vol. 67, iss. 3, pp. 457–461. DOI: 10.1016/S0042- 207X(02)00231-2. 22. Karlsson J., Snis A., Engqvist H., Lausmaa J. Characterization and comparison of materials produced by Electron Beam Melting (EBM) of two different Ti-6Al-4V powder fractions. Journal of Materials Processing Technology , 2013, vol. 213, iss. 12, pp. 2109–2118. DOI: 10.1016/j.jmatprotec.2013.06.010. 23. Ladany L., Roy L. Mechanical behavior of Ti-6Al-4V manufactured by electron beam additive fabrication. ASME 2013 International Manufacturing Science and Engineering Conference , Madison,WI, 2013. DOI: 10.1115/ MSEC2013-1105. 24. Klimenov V., Slobodyan M., Ivanov Yu., Kiselev A., Matrenin S. Metallurgy of a Ti-Au alloy synthesized by controlled electric resistance fusion. Intermetallics , 2020, vol. 127, p. 106968. DOI: 10.1016/j.intermet.2020.106968. 25. Lee B.J. A thermodynamic evaluation of the Fe-Cr-Ni System. Journal of the Korean Institute of Metals and Materials , 1993, vol. 31, iss. 4, pp. 480–489. Con fl icts of Interest The authors declare no con fl ict of interest.  2021 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/ ).