Normal force influence on smoothing and hardening of steel 03Cr16Ni15Mo3Ti1 surface layer during dry diamond burnishing with spherical indenter

OBRABOTKAMETALLOV Vol. 24 No. 1 2022 17 TECHNOLOGY 19. Infl uence of ball-burnishing on roughness, hardness and corrosion resistance of AISI 1045 steel / Al. Saldaña-Robles, H. Plascencia-Mora, E. AguileraGómez, Ad. Saldaña-Robles, A. Marquez-Herrera, J.A. Diosdado-De la Peña // Surface and Coatings Technology. –2008. –Vol. 339. –P. 191–198. –DOI: 10.1016/j. surfcoat.2018.02.013. 20. Infl uence of ball burnishing on residual stress profi le of a 15-5PH stainless steel / V. Chomienne, F. Valiorgue, J. Rech, C. Verdu // CIRP Journal of Manufacturing Science and Technology. – 2016. – Vol. 13. – P. 90–96. – DOI: 10.1016/j.cirpj.2015.12.003. 21. Shiou F.-J., Hsu C.-C. Surface fi nishing of hardened and tempered stainless tool steel using sequential ball grinding, ball burnishing and ball polishing processes on a machining centre // Journal of Materials Processing Technology. – 2008. – Vol. 205, iss. 1–3. – P. 249– 258. – DOI: 10.1016/j.jmatprotec.2007.11.244. 22. Effect of slide burnishing method on the surface integrity of AISI 316Ti chromium–nickel steel / J.T. Maximov, G.V. Duncheva, A.P. Anchev, N. Ganev, I.M. Amudjev, V.P. Dunchev // Journal of the Brazilian Society of Mechanical Sciences and Engineering. – 2018. – Vol. 40, iss. 4. – Art. 194. – DOI: 10.1007/ s40430-018-1135-3. 23. Упрочнение и повышение качества поверхности деталей из аустенитной нержавеющей стали алмазным выглаживанием на токарно-фрезерном центре / В.П. Кузнецов, А.В. Макаров, А.Л. Осинцева, А.С. Юровских, Р.А. Саврай, С.А. Роговая, А.Е. Киряков // Упрочняющие технологии и покрытия. – 2011. – № 11 (83). – С. 16–26. 24. Infl uence of the process parameters on the surface roughness, micro-hardness, and residual stresses in slide burnishing of high-strength aluminum alloys / J.T. Maximov, A.P. Anchev, G.V. Duncheva, N. Ganev, K.F. Selimov // Journal of the Brazilian Society of Mechanical Sciences and Engineering. – 2017. – Vol. 39. – P. 3067–3078. – DOI: 10.1007/s40430-016-0647-y. 25. Kuznetsov V.P., Tarasov S.Yu., Dmitriev A.I. Nanostructuring burnishing and subsurface shear instability // Journal of Materials Processing Technology. – 2015. – Vol. 217. – P. 327–335. – DOI: 10.1016/j.jmatprotec.2014.11.023. 26. Электроимпульсное полирование на основе железа, хрома и никеля / Ю.В. Синькевич, В.К. Шелег, И.Н. Янковский, Г.Я. Беляев. – Минск: БНТУ, 2014. – 325 с. – ISBN 978-985-550-516-2. 27. Savrai R.A., Osintseva A.L. Effect of hardened surface layer obtained by frictional treatment on the contact endurance of the AISI 321 stainless steel under contact gigacycle fatigue tests // Materials Science and Engineering: A. – 2021. – Vol. 802. – Art. 140679. – DOI: 10.1016/j.msea.2020.140679. 28. Savrai R.A., Kolobylin Yu.M., Volkova E.G. Micromechanical characteristics of the surface layer ofmetastable austenitic steel after frictional treatment // Physics of Metals and Metallography. – 2021. – Vol. 122, iss. 8. – P. 800–806. – DOI: 10.1134/S0031918X21080123. 29. Владимиров В.И. Физическая природа разрушения материалов. – М.: Металлургия, 1984. – 280 с. 30. Смирнов С.В., Швейкин В.П. Пластичность и деформируемость углеродистых сталей при обработке давлением. – Екатеринбург: УрО РАН, 2009. – 255 с. – ISBN 973-5-7691-2081-7. 31. Крагельский И.В., Добычин М.Н., Комбалов В.С. Основы расчетов на трение и износ. – М.: Машиностроение, 1977. – 526 с. 32. The effect of contact stresses on the phase composition, strength and tribological properties of nanocrystal structures formed in steels and alloys upon sliding friction / L.G. Korshunov, V.A. Shabashov, N.L. Chernenko, V.P. Pilyugin // Metal Science and Heat Treatment. – 2008. – Vol. 50, iss. 11–12. – P. 583–592. – DOI: 10.1007/s11041-009-9103-2. 33. Jiang W.H., Pinkerton F.E., Atzmon M. Deformation-induced nanocrystallization: A comparison of two amorphous Al-based alloys // Journal of Materials Research. – 2005. – Vol. 20, iss. 3. – P. 696–702. – DOI: 10.1557/JMR.2005.0090. 34. Mordyuk B.N., Prokopenko G.I. Ultrasonic impact peening for the surface properties management // Journal of Sound and Vibration. – 2007. – Vol. 308. – P. 855–866. – DOI: 10.1016/j.jsv.2007.03.054. 35. Effect of structure evolution induced by ultrasonic peening on the corrosion behavior of AISI321 stainless steel / B.N. Mordyuk, G.I. Prokopenko, M.A. Vasylyev, M.O. Iefi mov // Materials Science and Engineering: A. – 2007. – Vol. 458. – P. 253–261. – DOI: 10.1016/j.msea.2006.12.049. 36. Strength of ultrafi ne-grained corrosionresistant steels after severe plastic deformation / O.V. Rybal’chenko, S.V. Dobatkin, L.M. Kaputkina, G.I. Raab, N.A. Krasilnikov // Materials Science and Engineering: A. – 2004. – Vol. 387–389. – P. 244–248. – DOI: 10.1016/j.msea.2004.03.097. 37. Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment / T. Roland, D. Retraint, K. Lu, J. Lu // ScriptaMaterialia. –2006. –Vol. 54, iss. 11. – P. 1949–1954. – DOI: 10.1016/j.scriptamat.2006.01.049. 38. Enhanced mechanical behavior of a nanocrystallised stainless steel and its thermal stability / T. Roland, D. Retraint, K. Lu, J. Lu // Materials Science and

RkJQdWJsaXNoZXIy MTk0ODM1