OBRABOTKAMETALLOV technology Vol. 24 No. 1 2022 References 1. Celik A., Alagac M.S., Turan S., Kara A., Kara F. Wear behavior of solid SiAlON milling tools during high speed milling of Inconel 718. Wear, 2017, vol. 378–379, pp. 58–67. DOI: 10.1016/j.wear.2017.02.025. 2. Cantero J.L., Díaz-Álvarez J., Miguélez M.H., Marín N.C. Analysis of tool wear patterns in finishing turning of Inconel 718. Wear, 2013, vol. 297, iss. 1–2, pp. 885–894. DOI: 10.1016/j.wear.2012.11.004. 3. Augspurger T., Bergs T., Döbbeler B. Measurement and modeling of heat partitions and temperature fields in the workpiece for cutting Inconel 718, AISI 1045, Ti6Al4V, and AlMgSi0.5. Journal of Manufacturing Science and Engineering, 2019, vol. 141 (6), p. 061007. DOI: 10.1115/1.4043311. 4. Petrů J., Zlámal T., Čep R., Sadílek M., Stančeková D. The effect of feed rate on durability and wear of exchangeable cutting inserts during cutting Ni-625. Tehnicki Vjesnik = Technical Gazette, 2017, vol. 24, suppl. 1, pp. 1–6. DOI: 10.17559/TV-20131221170237. 5. Makarov A.D. Optimizatsiya protsessov rezaniya [Cutting process optimization]. Moscow, Mashinostroenie Publ., 1976. 278 p. 6. Baralić J.C., Dučić N.G., Mitrović A.M., Kovač P.P., Lučić M.V. Modeling and optimization of temperature in end milling operations. Thermal Science, 2019, vol. 23, iss. 6A, pp. 3651–3660. DOI: 10.2298/TSCI190328244B. 7. Liao Y.S., Lin H.M., Wang J.H. Behaviors of end milling Inconel 718 superalloy by cemented carbide tools. Journal of Materials Processing Technology, 2008, vol. 201, iss. 1–3, pp. 460–465. DOI: 10.1016/j. jmatprotec.2007.11.176. 8. Fedorov S.V., Min Kh.S. Vliyanie kompleksnoi poverkhnostnoi obrabotki na iznashivanie frezernykh tverdosplavnykh plastin pri rezanii nikelevogo splava [The influence of complex surface treatment on wear of milling carbide inserts when machining of nickel alloy]. Izvestiya vysshikh uchebnykh zavedenii. Fizika = Russian Physics Journal, 2018, vol. 61, no. 8-2, pp. 93–97. (In Russian). 9. Tanaka H., Sugihara T., Enomoto T. High speed machining of Inconel 718 focusing on wear behaviors of PCBN cutting tool. Procedia CIRP, 2016, vol. 46, pp. 545–548. DOI: 10.1016/j.procir.2016.03.120. 10. Czan A., Sajgalik M., Holubjak J., Zauskova L., Czanova T., Martikan P. Identification of temperatures in cutting zone when dry machining of nickel alloy Inconel 718. Procedia Manufacturing, 2017, vol. 14, pp. 66–75. DOI: 10.1016/j.promfg.2017.11.008. 11. Czan A., Danis I., Holubjak J., Zauskova L., Czánová T., Mikloš M., Martikáň P. Cutting zone temperature identification during machining of nickel alloy Inconel 718. Technological Engineering, 2017, vol. 14, pp. 24–29. DOI: 10.1515/teen-2017-0017. 12. Coz G.L., Dudzinski D. Temperature variation in the work piece and in the cutting tool when dry milling Inconel 718. International Journal of Advanced Manufacturing Technology, 2014, vol. 74, iss. 5–8, pp. 1133–1139. DOI: 10.1007/s00170-014-6006-1. 13. Sato M., Tamura N., Tanaka H. Temperature variation in the cutting tool in end milling. Journal of Manufacturing Science and Engineering, 2011, vol. 133, iss. 2, p. 021005. DOI: 10.1115/1.4003615. 14. Ozela T., Altan T. Process simulation using finite element method – prediction of cutting forces, tool stresses and temperatures in high-speed flat end milling. International Journal of Machine Tools and Manufacture, 2000, vol. 40, iss. 5, pp. 713–738. DOI: 10.1016/S0890-6955(99)00080-2. 15. Heisel U., Kushner V., Storchak M. Effect of machining conditions on specific tangential forces. Production Engineering, 2012, vol. 6, iss. 6, pp. 621–629. DOI: 10.1007/s11740-012-0417-3. 16. Kushner V.S., Storchak M.G., Burgonova O.Yu., Gubin D.S. Razrabotka matematicheskoi modeli krivoi techeniya splavov pri adiabaticheskikh usloviyakh deformirovaniya [Mathematical modeling of the alloy flow curve in adiabatic conditions of deformation]. Zavodskaya laboratoriya. Diagnostika materialov = Industrial laboratory. Diagnostics of materials, 2017, vol. 83, no. 5, pp. 45–49. Available at: https://www.zldm.ru/jour/article/view/477/478 (accessed 27.01.2022). 17. Soo S.L., Khan S.A., Aspinwall D.K., Harden P., Mantle A.L., Kappmeyer G., Pearson D., M’Saoubi R. High speed turning of Inconel 718 using PVD-coated PCBN tools. CIRP Annals – Manufacturing Technology, 2016, vol. 65, iss. 1, pp. 89–92. DOI: 10.1016/j.cirp.2016.04.044. 18. Klocke F., Brockmann M., Gierlings S., Veselovac D., Kever D., Roidl B., Schmidt G., Semmler U. Analytical modelling methods for temperature fields in metal cutting based on panel method of fluid mechanics. Procedia CIRP, 2015, vol. 31, pp. 352–356. DOI: 10.1016/j.procir.2015.03.067.
RkJQdWJsaXNoZXIy MTk0ODM1