Theoretical simulation of the process interelectrode space flushing during copy-piercing EDM of products made of polymer composite materials

ОБРАБОТКА МЕТАЛЛОВ Том 24 № 2 2022 36 ТЕХНОЛОГИЯ 2. Mechanical performance of woven kenaf-Kevlar hybrid composites / R. Yahaya, S.M. Sapuan, M. Jawaid, Z. Leman, E.S. Zainudin // Journal of Reinforced Plastics and Composites. – 2014. – Vol. 33 (24). – P. 2242– 2254. – DOI: 10.1177/0731684414559864. 3. Thomason J. A review of the analysis and characterisation of polymeric glass fi bre sizings // Polymer Testing. – 2020. – Vol. 85. – P. 106421. – DOI: 10.1016/j.polymertesting.2020.106421. 4. Shlykov E.S., Ablyaz T.R., Oglezneva S.A. Electrical discharge machining of polymer composites // Russian Engineering Research. – 2020. – Vol. 40. – P. 878–879. – DOI: 10.3103/S1068798X20100275. 5. Electric-discharge machining of polymer composites / T.R. Ablyaz, K.R. Muratov, E.S. Shlykov, G.S. Shipunov, T.V. Shakirzyanov // Russian Engineering Research. – 2019. – Vol. 39. – P. 898–900. – DOI: 10.3103/S1068798X19100058. 6. Analysis of wire-cut electro dischargemachining of polymer composite materials / T.R.Ablyaz, E.S. Shlykov, K.R. Muratov, S.S. Sidhu // Micromachines. – 2021. – Vol. 12 (5). – P. 571. – DOI: 10.3390/mi12050571. 7. Yilmaz O., Okka M.A. Effect of single and multichannel electrodes application on EDM fast hole drilling performance // The International Journal of Advanced Manufacturing Technology. – 2010. – Vol. 51. – P. 185– 194. – DOI: 10.1007/s00170-010-2625-3. 8. Bozdana A.T., Ulutas T. The effectiveness of multichannel electrodes on drilling blind holes on Inconel 718 by EDM process // Materials and Manufacturing Processes. – 2016. – Vol. 31. – P. 504– 513. – DOI: 10.1080/10426914.2015.1059451. 9. Haas P., Pontelandolfo P., Perez R. Particle hydrodynamics of the electrical discharge machining process. Pt. 1: Physical considerations and wire EDM process improvement // Procedia CIRP. – 2013. – Vol. 6. P. 41–46. – DOI: 10.1016/j.procir.2013.03.006. 10. Computational fl uid dynamics analysis of working fl uid fl ow and debris movement in wire EDMed kerf / A. Okada, Y. Uno, S. Onoda, S. Habib // CIRP Annals – Manufacturing Technology. – 2009. – Vol. 58. – P. 209–212. – DOI: 10.1016/j.cirp.2009.03.003. 11. Takino H., Han F. Cutting of polished singlecrystal silicon by wire electrical discharge machining using anti-electrolysis pulse generator // Proceedings of the 14th International Conference of the European Society for Precision Engineering and Nanotechnology. – Dubrovnik, Croatia, 2014. – Vol. 2. – P. 59–62. 12. Wang J., Han F. Simulation model of debris and bubble movement in consecutive-pulse discharge of electrical discharge machining // International Journal of Machine Tools and Manufacture. – 2014. – Vol. 77. – P. 56–65. – DOI: 10.1016/j.ijmachtools.2013.10.007 13. Schumacher B.M. About the role of debris in the gap during electrical discharge machining // CIRP Annals – Manufacturing Technology. – 1990. – Vol. 39. – P. 197–199. – DOI: 10.1016/S0007-8506(07)61034-8. 14. Su J.C., Kao J.Y., Tang Y.S. Optimisation of the electrical discharge machining process using a GA-based neural network // International Journal of Advanced Manufacturing Technology. – 2004. – Vol. 24. – P. 81– 90. – DOI: 10.1007/s00170-003-1729-4. 15. Investigation of the scaling effects in mesomicro EDM / U. Maradia, K. Wegener, J. Stirnimann, R. Knaak, M. Boccadoro // ASME 2013 International Mechanical Engineering Congress and Exposition. – San Diego, 2013. – Vol. 2B. – P. 63160. – DOI: 10.1115/ IMECE2013-63160. 16. A new electrode sidewall insulation method in electrochemical drilling / J. Wang, W. Chen, F. Gao, F. Han // International Journal of Advanced Manufacturing Technology. – 2014. – Vol. 75. – P. 21– 32. – DOI: 10.1007/s00170-014-6131-x. 17. Numerical simulation of liquid-solid two-phase fl ow fi eld in discharge gap of high-speed small hole EDM drilling / Y.Q. Wang, M.R. Cao, S.Q. Yang, W.H. Li // Advanced Materials Research. – 2008. – Vol. 53– 54. – P. 409–414. – DOI: 10.4028/www.scientifi c.net/ AMR.53-54.409. 18. Kliuev M., Baumgart C., Wegener K. Fluid dynamics in electrode fl ushing channel and electrodeworkpiece gap during EDM drilling // Procedia CIRP. – 2018. – Vol. 68. – P. 254–259. – DOI: 10.1016/j. procir.2017.12.058. 19. Ablyaz T.R., Shlykov E.S., Muratov K.R. Improving the effi ciency of electrical discharge machining of special-purpose products with composite electrode tools // Materials. – 2021. – Vol. 14. – P. 6105. – DOI: 10.3390/ma14206105. Конфликт интересов Авторы заявляют об отсутствии конфликта интересов.  2022 Авторы. Издательство Новосибирского государственного технического университета. Эта статья доступна по лицензии Creative Commons «Attribution» («Атрибуция») 4.0 Всемирная (https://creativecommons.org/licenses/by/4.0/)

RkJQdWJsaXNoZXIy MTk0ODM1