OBRABOTKAMETALLOV TECHNOLOGY Vol. 24 No. 2 2022 10. Okada A., Uno Y., Onoda S., Habib S. Computational fl uid dynamics analysis of working fl uid fl ow and debris movement in wire EDMed kerf. CIRP Annals – Manufacturing Technology, 2009, vol. 58, pp. 209–212. DOI: 10.1016/j.cirp.2009.03.003. 11. Takino H., Han F. Cutting of polished single-crystal silicon by wire electrical discharge machining using antielectrolysis pulse generator. Proceedings of the 14th International Conference of the European Society for Precision Engineering and Nanotechnology, Dubrovnik, Croatia, 2014, vol. 2, pp. 59–62. 12. Wang J., Han F. Simulation model of debris and bubble movement in consecutive-pulse discharge of electrical discharge machining. International Journal of Machine Tools and Manufacture, 2014, vol. 77, pp. 56–65. DOI: 10.1016/j.ijmachtools.2013.10.007. 13. Schumacher B.M. About the role of debris in the gap during electrical discharge machining. CIRP Annals – Manufacturing Technology, 1990, vol. 39, pp. 197–199. DOI: 10.1016/S0007-8506(07)61034-8. 14. Su J.C., Kao J.Y., TangY.S. Optimisation of the electrical dischargemachining process using a GA-based neural network. International Journal of Advanced Manufacturing Technology, 2004, vol. 24, pp. 81–90. DOI: 10.1007/ s00170-003-1729-4. 15. Maradia U., Wegener K., Stirnimann J., Knaak R., Boccadoro M. Investigation of the scaling effects in mesomicro EDM. ASME 2013 International Mechanical Engineering Congress and Exposition, San Diego, 2013, vol. 2B, p. 63160. DOI: 10.1115/IMECE2013-63160. 16. Wang J., Chen W., Gao F., Han F. A new electrode sidewall insulation method in electrochemical drilling. International Journal of Advanced Manufacturing Technology, 2014, vol. 75, pp. 21–32. DOI: 10.1007/s00170-0146131-x. 17. Wang Y.Q., Cao M.R., Yang S.Q., Li W.H. Numerical simulation of liquid-solid two-phase fl ow fi eld in discharge gap of high-speed small hole EDM drilling. Advanced Materials Research, 2008, vol. 53–54, pp. 409–414. DOI: 10.4028/www.scientifi c.net/AMR.53-54.409. 18. Kliuev M., Baumgart C., Wegener K. Fluid dynamics in electrode fl ushing channel and electrode-workpiece gap during EDM drilling. Procedia CIRP, 2018, vol. 68, pp. 254–259. DOI: 10.1016/j.procir.2017.12.058. 19. Ablyaz T.R., Shlykov E.S., MuratovK.R. Improving the effi ciency of electrical dischargemachining of specialpurpose products with composite electrode tools. Materials, 2021, vol. 14, p. 6105. DOI: 10.3390/ma14206105. Confl icts of Interest The authors declare no confl ict of interest. 2022 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
RkJQdWJsaXNoZXIy MTk0ODM1