OBRABOTKAMETALLOV MATERIAL SCIENCE Том 23 № 3 2021 EQUIPMEN . INSTRUM TS Vol. 4 No. 2 2022 14. Zhoua C., Hua B., Chenb S., Mac L. Design and analysis of high-speed cam mechanism using Fourier series. Mechanism and Machine Theory, 2016, vol. 104, pp. 118–129. DOI: 10.1016/j.mechmachtheory.2016.05.009. 15. Stocki R., Szolc T., Tauzowski P., Knabel J. Robust design optimization of the vibrating rotor-shaft system subjected to selected dynamic constraints. Mechanical Systems and Signal Processing, 2012, vol. 29, pp. 34–44. DOI: 10.1016/j.ymssp.2011.07.023. 16. Zhang T., Li X., Wang Y., Sun L. A semi-analytical load distribution model for cycloid drives with tooth profi le and longitudinal modifi cations. Applied Sciences, 2020, vol. 10, iss. 14, p. 4859. DOI: 10.3390/app10144859. 17. Xu L.X., Chen B.K., Li C.Y. Dynamic modelling and contact analysis of bearing-cycloid-pinwheel transmission mechanisms used in joint rotate vector reducers. Mechanism and Machine Theory, 2019, vol. 137, pp. 432–458. DOI: 10.1016/j.mechmachtheory.2019.03.035. 18. Kodnyanko V., Shatokhin S., Kurzakov A., Pikalov Y. Theoretical analysis of compliance and dynamics quality of a lightly loaded aerostatic journal bearing with elastic orifi ces. Precision Engineering, 2021, vol. 68, pp. 72–81. DOI: 10.1016/j.precisioneng.2020.11.012. 19. Mott R.L. Machine elements in mechanical design. 5th ed. Pearson, 2013. 816 p. ISBN: 0135077931. ISBN: 978-0135077931. 20. Novotný P., Jonák M., Vacula J. Evolutionary optimisation of the thrust bearing considering multiple operating conditions in turbomachinery. International Journal of Mechanical Sciences, 2021, vol. 195, p. 106240. DOI: 10.1016/j.ijmecsci.2020.106240. 21. Kaipio T., Smelov L., Morgan C., Leighton N. A practical approach to motion control for varying inertia systems. Progress in system and robot analysis and control design. Ed. by S.G. Tzafestas, G. Schmidt. London, Springer, 1999, pp. 195–204. DOI: 10.1007/BFb0110545. 22. Vulfson I. Dynamics of cyclic machines. Cham, Springer International, 2015. 390 p. ISBN 978-3-319-126333. eISBN 978-3-319-12634-0. DOI: 10.1007/978-3-319-12634-0. 23. Zawislak S., Rysinski J. Graph-based modelling in engineering. Switzerland, Springer International, 2017. 247 p. ISBN 978-3-319-39018-5. eISBN 978-3-319-39020-8. DOI: 10.1007/978-3-319-39020-8. 24. Martynova T.G., Skeeba V.Yu., Podgornyj Yu.I., Lobanov D.V. Synthesis of irregular motion mechanisms for production machine drives. IOP Conference Series: Materials Science and Engineering, 2020, vol. 843, p. 012006. DOI: 10.1088/1757-899X/843/1/012006. 25. Podgornyi Yu.I., Martynova T.G., Skeeba V.Yu., Kosilov A.S., Chernysheva A.A., Skeeba P.Yu. Experimental determination of useful resistance value during pasta dough kneading. IOP Conference Series: Earth and Environmental Science, 2017, vol. 87, iss. 8, p. 082039. DOI: 10.1088/1755-1315/87/8/082039. 26. Podgornyj Yu.I., Martynova T.G., Skeeba V.Yu., Lobanov D.V., Zhirova A.A., Bredikhina A.N., KosilovA.S., Pechorkina N.S. Metodika uravnoveshivaniya rotorov tekhnologicheskikh mashin [The methods of technological machines’ rotors balance]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2016, no. 2 (71), pp. 41–50. DOI: 10.17212/1994-6309-2016-2-41-50. 27. Podgornyj Yu.I., Martynova T.G., Skeeba V.Yu., Lobanov D.V., Martyushev N.V. Algorithm for determining the unbalances of continuous mixers rotors. Journal of Physics: Conference Series, 2021, vol. 1061, p. 012071. DOI: 10.1088/1742-6596/2061/1/012071. Confl icts of Interest The authors declare no confl ict of interest. 2022 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
RkJQdWJsaXNoZXIy MTk0ODM1