OBRABOTKAMETALLOV MATERIAL SCIENCE Vol. 24 No. 2 2022 12. Nikolenko S.V., Konevtsov L.A., Chigrin P.G. Additive infl uence of carbon and carbides of vanadium and chrome in anodic tungsten-cobalt materials on their erosive fragility and formation of the alloyed layer at ESA of steels 35. Materials Science Forum. Trans Tech Publications, 2020, vol. 992, pp. 683–688. DOI: 10.4028/www. scientifi c.net/MSF.992.683. 13. Kudryashov A.E., Kiryukhantsev-Korneev Ph.V., Petrzhik M.I., Levashov E.A. Application of Zr-Si-B electrodes for electrospark alloying of Inconel 718 in vacuum, argon and air environment. CIS Iron and Steel Review, 2019, vol. 18, pp. 46–51. DOI: 10.17580/cisisr.2019.02.10. 14. Zhao H., Gao Ch., Wu X., Xu B., Lu Y., Zhu L. Anovel method to fabricate composite coatings via ultrasonicassisted electro-spark powder deposition. Ceramics International, 2019, vol. 45, iss. 17, pp. 22528–22537. DOI: 10.1016/j.ceramint.2019.07.279. 15. Chandrakant, Reddy N.S., Panigrahi B.B. Electro spark coating ofAlCoCrFeNi high entropy alloy onAISI410 stainless steel. Materials Letters, 2021, vol. 304, p. 130580. DOI: 10.1016/j.matlet.2021.130580. 16. Shafyei H., Salehi M., Bahrami A. Fabrication, microstructural characterization and mechanical properties evaluation of Ti/TiB/TiB2 composite coatings deposited on Ti6Al4V alloy by electro-spark deposition method. Ceramics International, 2020, vol. 46, iss. 10, pp. 15276–15284. DOI: 10.1016/j.ceramint.2020.03.068. 17. Li C., Ge P., Bi W. Thermal simulation of the single discharge for electro-spark deposition diamond wire saw. The International Journal of Advanced Manufacturing Technology, 2021, vol. 114, iss. 11, pp. 3597–3604. DOI: 10.1007/s00170-021-07132-0. 18. Burkov A.A. Poluchenie amorfnykh pokrytii elektroiskrovoi obrabotkoi stali 35 v smesi zheleznykh granul s CrMoWCBSi poroshkom [Production amorphous coatings by electrospark treatment of steel 1035 in a mixture of iron granules with CrMoWCBSi powder]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Materials Science, 2019, vol. 21, no. 4, pp. 19–30. DOI: 10.17212/1994-6309-2019-21.4-19-30. 19. Burkov A.A., Kulik M.A. Wear-resistant and anticorrosive coatings based on chrome carbide Cr7C3 obtained by electric spark deposition. Protection of Metals and Physical Chemistry of Surfaces, 2020, vol. 56, iss. 6, pp. 1217– 1221. DOI: 10.1134/S2070205120060064. 20. Kwok D.Y., NeumannA.W. Contact angle measurement and contact angle interpretation. Advances in Colloid and Interface Science, 1999, vol. 81, iss. 3, pp. 167–249. DOI: 10.1016/S0001-8686(98)00087-6. 21. Jamnaparaa N.I., Frangini S., Alphonsa J., Chauhan N.L., Mukherjee S. Comparative analysis of insulating properties of plasma and thermally grown alumina fi lms on electrospark aluminide coated 9Cr steels. Surface and Coatings Technology, 2015, vol. 266, pp. 146–150. DOI: 10.1016/j.surfcoat.2015.02.028. 22. Khimukhin S.N., Eremina K.P., Nikolenko S.V. Obtaining of coatings from Ni-Al by electro spark deposition and surface smoothing by ultrasonic plastic deformation. Materials Science Forum. Trans Tech Publications, 2021, vol. 1037, pp. 473–478. DOI: 10.4028/www.scientifi c.net/MSF.1037.473. 23. Nikolenko S.V., Syui N.A. Investigation of coatings produced by the electrospark machining method of steel 45 with electrodes based on carbides of tungsten and titanium. Protection of Metals and Physical Chemistry of Surfaces, 2017, vol. 53, iss. 5, pp. 889–894. DOI: 10.1134/S207020511705015X. 24. Burkov А.А., Kulik М.А., Krutikova V.O. Characteristics of Ti–Si coatings on Ti6Al4V alloy subjected to electrospark granules deposition. Tsvetnye metally, 2019, no. 4, pp. 54–59. DOI: 10.17580/tsm.2019.04.07. (In Russian). 25. XieY.-j., Wang D., Wang M.-s., YeW. Evaluation of three kinds of MCrAlYcoatings produced by electrospark deposition. Transactions of Nonferrous Metals Society of China, 2016, vol. 26, iss. 6, pp. 1647–1654. DOI: 10.1016/ S1003-6326(16)64274-7. 26. Ma J., Wen N., Wang R., Wang J., Zhang X. Li J., Chen Y. Effect of mullite fi lm layers on the hightemperature oxidation resistance of AISI 304 stainless steel. Coatings, 2021, vol. 11, iss. 8, p. 880. DOI: 10.3390/ coatings11080880. 27. Riffard F., Joannet E., Buscail H., Rolland R., Perrier S. Benefi cial effect of a pre-ceramic polymer coating on the protection at 900 °C of a commercial AISI 304 stainless steel. Oxidation of Metals, 2017, vol. 88, iss. 1, pp. 211–220. DOI: 10.1007/s11085-016-9705-1. 28. Guangxiong C., Zhongrong Z., Kapsa P., Vincent L. Effect of surface topography on formation of squeal under reciprocating sliding. Wear, 2002, vol. 253, iss. 3–4, pp. 411–423. DOI: 10.1016/S0043-1648(02)00161-8. Confl icts of Interest The authors declare no confl ict of interest. 2022 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
RkJQdWJsaXNoZXIy MTk0ODM1