OBRABOTKAMETALLOV TECHNOLOGY Vol. 24 No. 3 2022 electric arc and concentrated sources of energy. International Journal of Engineering and Technology, 2018, vol. 7, no. 4.38, pp. 741–747. DOI: 10.14419/ijet.v7i4.38.25777. 14. Mladenov G.M., Koleva E.G., Trushnikov D.N. Mathematical modelling for energy beam additive manufacturing. Journal of Physics: Conference Series, 2018, vol. 1089, art. 012001. DOI: 10.1088/1742-6596/1089/1/012001. 15. Trushnikov D.N., Permyakov G.L., Varushkin S.V., Davlyatshin R.V., Bayandin Y.V., Pang S. Improving the electron-beam additive manufacturing growth of components. Russian Engineering Research, 2021, vol. 41, no. 9, pp. 874–876. DOI: 10.3103/S1068798X21090276. Translated from STIN, 2021, no. 6, pp. 38–40. 16. Brackbill J., Kothe D. Dynamic modeling of the surface tension. Proceedings of the Third Microgravity Fluid Physics Conference, Cleveland, OH, NASA Lewis Research Center, 1996, pp. 693–698. 17. Anisimov S.I., Khokhlov V.A. Instabilities in laser-matter interaction. Boca Raton, FL, CRC Press, 1995. 141 p. ISBN 0-8493-8660-8. 18. Cho J.-H., Farson D.F., Milewski J.O., Hollis K.J. Weld pool fl ows during initial stages of keyhole formation in laser welding. Journal of Physics D: Applied Physics, 2009, vol. 42, no. 17. DOI: 10.1088/0022-3727/42/17/175502. 19. Khairallah S.A., Anderson A.T., Rubenchik A., King W.E. Laser powder-bed fusion additive manufacturing: Physics of complex melt fl ow and formation mechanisms of pores, spatter and denudation zones. Acta Materialia, 2016, vol. 108 (16), pp. 36–45. DOI: 10.1016/j.actamat.2016.02.014. 20. Leitz K.-H., Grohs C., Singer P., Tabernig B., Plankensteiner A., Kestler H., Sigl L.S. Fundamental analysis of the infl uence of powder characteristics in Selective Laser Melting of molybdenum based on a multi-physical simulation model. International Journal of Refractory Metals and Hard Materials, 2018, vol. 72, pp. 1–8. DOI: 10.1016/j. ijrmhm.2017.11.034. 21. Strakhova E.A., Erofeev V.A., Sudnik V.A. Fiziko-matematicheskoe modelirovanie protsessa shirokosloinoi naplavki s poperechnymi kolebaniyami plazmotrona [Physical-mathematical modeling of wide-layer surfacing with transverse oscillations of plasmа torch]. Svarka i diagnostika = Welding and Diagnostics, 2009, no. 3, pp. 32–38. (In Russian). 22. Semak V., Matsunawa A. The role of recoil pressure in energy balance during laser materials processing. Journal of Physics D: Applied Physics, 1997, vol. 30, no. 18, pp. 2541–2552. Confl icts of Interest The authors declare no confl ict of interest. 2022 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
RkJQdWJsaXNoZXIy MTk0ODM1