OBRABOTKAMETALLOV Vol. 24 No. 3 2022 65 EQUIPMENT. INSTRUMENTS 16. Leppert T. Surface layer properties of AISI 316L steel when turning under dry and with minimum quantity lubrication conditions. Proceedings of the Institution of Mechanical Engineers. Pt. B: Journal of Engineering Manufacture, 2012, vol. 226, iss. 4, pp. 617–631. DOI: 10.1177/0954405411429894. 17. Bushlya V., Zhou J., Ståhl J.E. Effect of cutting conditions on machinability of superalloy Inconel 718 during high speed turning with coated and uncoated PCBN tools. Procedia CIRP, 2012, vol. 3, pp. 370–375. DOI: 10.1016/j. procir.2012.07.064. 18. Attia H., Tavakoli S., Vargas R., ThomsonV. Laser-assisted high-speed fi nish turning of superalloy Inconel 718 under dry conditions. Procedia CIRP, 2010, vol. 59, pp. 83–88. DOI: 10.1016/j.cirp.2010.03.093. 19. Prihandana G.S., Mahardika M., Hamdi M., Mitsui K. Effect of low-frequency vibration on workpiece in EDM processes. Journal of Mechanical Science and Technology, 2011, vol. 25, no. 5, pp. 1231–1234. DOI: 10.1007/ s12206-011-0307-1. 20. Kötter D. Herstellung von Schneidkantenverrundungen und deren Einfl uss auf das Einsatzverhalten von Zerspanwerkzeugen. These. Universität Dortmund. Vulkan-Verlag, 2006. 107 S. ISBN 3802787366. ISBN 9783802787362. 21. Takhman S.I. Razrabotka edinykh modelei protsessa iznashivaniya instrumental’nykh tverdykh splavov [Development of unifi ed models of the instrumental hard alloys wear-out process]. Vestnik mashinostroeniya = Russian Engineering Research, 2008, no. 9, pp. 56–59. 22. Astakhov V.P., Davim P.J. Tools (geometry and material) and tool wear. Machining. Ed. by P.J. Davim. London, Springer, 2008, pp. 29–57. DOI: 10.1007/978-1-84800-213-5_2. Confl icts of Interest The authors declare no confl ict of interest. 2022 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
RkJQdWJsaXNoZXIy MTk0ODM1