OBRABOTKAMETALLOV MATERIAL SCIENCE Vol. 24 No. 3 2022 7. Chang Y.Y., Chang B.Y., Chen C.S. Effect of CrN addition on the mechanical and tribological performances of multilayered AlTiN/CrN/ZrN hard coatings. Surface and Coatings Technology, 2022, vol. 433, pp. 128107. DOI: 10.1016/J.SURFCOAT.2022.128107. 8. Rajabi T., Atapour M., Elmkhah H., Nahvi S.M. Nanometric CrN/CrAlN and CrN/ZrN multilayer physical vapor deposited coatings on 316L stainless steel as bipolar plate for proton exchange membrane fuel cells. Thin Solid Films, 2022, vol. 753, p. 139288. DOI: 10.1016/J.TSF.2022.139288. 9. Maksakova O., Simoẽs S., PogrebnjakA., Bondar O., Kravchenko Y., Beresnev V., Erdybaeva N. The infl uence of deposition conditions and bilayer thickness on physical-mechanical properties of CA-PVD multilayer ZrN/CrN coatings. Materials Characterization, 2018, vol. 140, pp. 189–196. DOI: 10.1016/J.MATCHAR.2018.03.048. 10. Zhang J.J., Wang M.X., Yang J., Liu Q.X., Li D.J. Enhancing mechanical and tribological performance of multilayered CrN/ZrN coatings. Surface and Coatings Technology, 2007, vol. 201, pp. 5186–5189. DOI: 10.1016/J. SURFCOAT.2006.07.093. 11. Huang S.H., Chen S.F., Kuo Y.C., Wang C.J., Lee J.W., Chan Y.C., Chen H.W., Duh J.G., Hsieh T.E. Mechanical and tribological properties evaluation of cathodic arc deposited CrN/ZrN multilayer coatings. Surface and Coatings Technology, 2011, vol. 206, iss. 7, pp. 1744–1752. DOI: 10.1016/j.surfcoat.2011.10.029. 12. Zhang Z.G., Rapaud O., Allain N., Mercs D., Baraket M., Dong C., Coddet C. Microstructures and tribological properties of CrN/ZrN nanoscale multilayer coatings. Applied Surface Science, 2009, vol. 255, iss. 7, pp. 4020–4026. DOI: 10.1016/j.apsusc.2008.10.075. 13. J.A., Souza R.M., De Lima N.B., Tschiptschin A.P. Thick CrN/NbN multilayer coating deposited by cathodic arc technique. Materials Research, 2017, vol. 20, pp. 200–209. DOI: 10.1590/1980-5373-MR-2016-0293. 14. Barshilia H.C., Selvakumar N., Deepthi B., Rajam K.S. A comparative study of reactive direct current magnetron sputtered CrAlN and CrN coatings. Surface and Coatings Technology, 2006, vol. 201, pp. 2193–2201. DOI: 10.1016/J.SURFCOAT.2006.03.037. 15. Yi P., Zhu L., Dong C., Xiao K. Corrosion and interfacial contact resistance of 316L stainless steel coated with magnetron sputtered ZrN and TiN in the simulated cathodic environment of a proton-exchange membrane fuel cell. Surface and Coatings Technology, 2019, vol. 363, pp. 198–202. DOI: 10.1016/J.SURFCOAT.2019.02.027. 16. Filippov A.V., Shamarin N.N., Moskvichev E.N., Novitskaya O.S., Knyazhev E.O., Denisova Yu.A., Leonov A.A., Denisov V.V. Investigation of the structural-phase state and mechanical properties of ZrCrN coatings obtained by plasma-assisted vacuum arc evaporation. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2022, vol. 24, no. 1, pp. 87–102. DOI: 10.17212/1994-63092022-24.1-87-102. 17. Sue J.A., PerryA.J., Vetter J.Young’s modulus and stress of CrNdeposited by cathodic vacuumarc evaporation. Surface and Coatings Technology, 1994, vol. 68–69, pp. 126–130. DOI: 10.1016/0257-8972(94)90149-X. 18. Meenaatci A.T.A., Rajeswarapalanichamy R., Iyakutti K. Pressure induced phase transition of ZrN and HfN: a fi rst principles study. Journal of Atomic and Molecular Sciences, 2013, vol. 4, no. 4, pp. 321–335. DOI: 10.4208/ jams.121012.012013a. 19. Chimmat M., Srinivasan D. Understanding the Residual Stress in DMLS CoCrMo and SS316L using X-ray diffraction. Procedia Structural Integrity, 2019, vol. 14, pp. 746–757. DOI: 10.1016/J.PROSTR.2019.05.093. 20. Gorelik S.S., Rastorguev L.N., Skakov Yu.A. Rentgenografi cheskii i elektronnoopticheskii analiz [X-Ray diffraction and electron-optical analysis]. 2nd ed. Moscow, Metallurgiya Publ., 1970. 366 p. Confl icts of Interest The authors declare no confl ict of interest. 2022 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
RkJQdWJsaXNoZXIy MTk0ODM1