A study of the relationship between cutting force and machined surface roughness with the feed per tooth when milling EuTroLoy 16604 material produced by the DMD method

OBRABOTKAMETALLOV Vol. 24 No. 4 2022 17 TECHNOLOGY 5. Dolgovechny A.V., Demidova L.A., Khanov A.M. Protsess strukturoobrazovaniya v pokrytiyakh pri lazernoi naplavke [Structure formation process in coatings during overlaying laser welding]. Izvestiya vuzov. Poroshkovaya metallurgiya i funktsional’nye pokrytiya = Powder Metallurgy аnd Functional Coatings, 2014, vol. 1, pp. 49–55. DOI: 10.17073/1997-308X-2014-1-49-55. 6. Eryomina M.A., Lomayeva S.F., Kharanzhevskiy E.V. Struktura i iznosostoikost’ pokrytii, poluchennykh vysokoskorostnoi lazernoi naplavkoi mekhanokompozitov na osnove karbogidrida titana [Structure and wear resistance of coatings produced by the short-pulse laser alloying of titanium carbohydride-based mechanocomposites]. Poroshkovaya metallurgiya i funktsional’nye pokrytiya = Powder Metallurgy аnd Functional Coatings, 2021, vol. 4, pp. 46–56. DOI: 10.17073/1997-308X-2021-4-46-56. 7. Bonaiti G., Parenti P., Annoni M., Kapoor S. Micro-milling machinability of DED additive titanium Ti-6Al-4V. Procedia Manufacturing, 2017, vol. 10, pp. 497–509. DOI: 10.1016/j.promfg.2017.07.104. 8. Greco S., Schmidt M., Klauer K., Kirsch B., Aurich J.C. Hybrid manufacturing: infl uence of material properties during micro milling of different additively manufactured AISI 316L. Production Engineering, 2022. DOI: 10.1007/ s11740-022-01139-6. 9. Dilberoglu U.M., Gharehpapagh B., Yaman U. Current trends and research opportunities in hybrid additive manufacturing. The International Journal of Advanced Manufacturing Technology, 2021, vol. 113, pp. 623–648. DOI: 10.1007/s00170-021-06688-1. 10. Kim E.J., Lee C.M., Kim D.H. The effect of post-processing operations on mechanical characteristics of 304L stainless steel fabricated using laser additive manufacturing. Journal of Materials Research and Technology, 2021, vol. 15, pp. 1370–1381. DOI: 10.1016/j.jmrt.2021.08.142. 11. Szykiedans K., Credo W. Mechanical properties of FDM and SLA low-cost 3-D prints. Procedia Engineering, 2016, vol. 136, pp. 257–262. DOI: 10.1016/j.proeng.2016.01.207. 12. Polishetty A., Shunmugavel M., Goldberg M., Littlefair G., Singh R.K. Cutting force and surface fi nish analysis of machining additive manufactured titanium alloy Ti-6Al-4V. Procedia Manufacturing, 2017, vol. 7, pp. 284–289. DOI: 10.1016/j.promfg.2016.12.071. 13. Oyelola O., Crawforth P., M’Saoubi R., ClareA.T. Machining of additively manufactured parts: implications for surface integrity. Procedia CIRP, 2016, vol. 45, pp. 119–122. DOI: 10.1016/j.procir.2016.02.066. 14. Manna A., Bhattacharayya B. A study on machinability of Al/SiC-MMC. Journal of Materials Processing Technology, 2003, vol. 140, pp. 711–716. DOI: 10.1016/S0924-0136(03)00905-1. 15. Muratov K.R., Gashev E.A., Ablyaz T.R., Panteleev A.A. Infl uence of cutting conditions on the surface roughness of titanium-alloy parts produced by additive and traditional methods. Russian Engineering Research, 2021, vol. 41, iss. 5, pp. 434–436. DOI: 10.3103/S1068798X21050129. 16. Soufl as T., Bikas H., Ghassempouri M., Salmi A., Atzeni E., Saboori A., Brugnetti I., Valente A., Mazzucato F., Stavropoulos P. A comparative study of dry and cryogenic milling for Directed Energy Deposited IN718 components: effect on process and part quality. The International Journal of Advanced Manufacturing Technology, 2022, vol. 119, pp. 745–758. DOI: 10.1007/s00170-021-08313-7. 17. Danish M., Aslantas K., Hascelik A., Rubaiee S., Gupta M.K., Yildirim M.B., Ahmed A., Mahfous A. An experimental investigations on effects of cooling/lubrication conditions in micro milling of additively manufactured Inconel 718. Tribology International, 2022, vol. 173. DOI: 10.1016/j.triboint.2022.107620. 18. Zhang R., Nagaraja K.M., Bian N., Fisher E., Ahmadyar S., Bayazitoglu K., Lu H., Li Wei. Experimental studies on fabricating functionally gradient material of stainless steel 316L-Inconel 718 through hybrid manufacturing: directed energy deposition and machining. The International Journal of Advanced Manufacturing Technology, 2022, vol. 120, pp. 7815–7826. DOI: 10.1007/s00170-022-09304-y. 19. Samodurova M., Logachev I., Shaburova N., Samoilova O., Radionova L., Zakirov R., Pashkeev K., Myasoedov V., Trofi mov E. Study of the structural characteristics of titanium alloy products manufactured using additive technologies by combining the selective laser melting and direct metal deposition methods. Materials, 2019, vol. 12. DOI: 10.3390/ma12193269. 20. Baranovskii Yu.V., Brakhman L.A., Gdalevich A.I., et.al. Rezhimy rezaniya metallov [Metal cutting conditions]. Moscow, NIITavtoprom Publ., 1995. 456 p. 21. Guo P., Zou B., Huang C., Gao H. Study on microstructure, mechanical properties and machinability of effi ciently additive manufactured AISI 316L stainless steel by high-power direct laser deposition. Journal of Materials Processing Technology, 2017, vol. 240, pp. 12–22. DOI: 10.1016/j.jmatprotec.2016.09.005. Confl icts of Interest The authors declare no confl ict of interest.  2022 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).

RkJQdWJsaXNoZXIy MTk0ODM1