OBRABOTKAMETALLOV Vol. 24 No. 4 2022 technology References 1. Shatulsky A.A., Shapovalova M.A. Primenenie metodov prototipirovaniya dlya izgotovleniya izdelii mashinostroeniya [Application of prototypingmethods for making blanks]. Naukoemkie tekhnologii v mashinostroenii = Science Intensive Technologies in Mechanical Engineering, 2011, no. 1, pp. 24–29. 2. Zekovic S., Kovacevic R. Modeling of laser-based direct metal deposition. Tribology in Industry, 2006, vol. 28, pp. 9–14. 3. Imran M.K., Masood S.H., Brandt M. Direct metal deposition of H13 tool steel on copper alloy substrate: parametric investigation. Lasers in Manufacturing and Materials Processing, 2015, vol. 2, iss. 4, pp. 242–260. DOI: 10.1007/s40516-015-0018-z. 4. Wang X., Jiang J., Tian Y. A review on macroscopic and microstructural features of metallic coating created by pulsed laser material deposition. Micromachines, 2022, vol. 13, iss. 5. DOI: 10.3390/mi13050659. 5. Dolgovechny A.V., Demidova L.A., Khanov A.M. Protsess strukturoobrazovaniya v pokrytiyakh pri lazernoi naplavke [Structure formation process in coatings during overlaying laser welding]. Izvestiya vuzov. Poroshkovaya metallurgiya i funktsional’nye pokrytiya = Powder Metallurgy аnd Functional Coatings, 2014, vol. 1, pp. 49–55. DOI: 10.17073/1997-308X-2014-1-49-55. 6. Eryomina M.A., Lomayeva S.F., Kharanzhevskiy E.V. Struktura i iznosostoikost’ pokrytii, poluchennykh vysokoskorostnoi lazernoi naplavkoi mekhanokompozitov na osnove karbogidrida titana [Structure and wear resistance of coatings produced by the short-pulse laser alloying of titanium carbohydride-based mechanocomposites]. Poroshkovaya metallurgiya i funktsional’nye pokrytiya = Powder Metallurgy аnd Functional Coatings, 2021, vol. 4, pp. 46–56. DOI: 10.17073/1997-308X-2021-4-46-56. 7. Bonaiti G., Parenti P., Annoni M., Kapoor S. Micro-milling machinability of DED additive titanium Ti-6Al4V. Procedia Manufacturing, 2017, vol. 10, pp. 497–509. DOI: 10.1016/j.promfg.2017.07.104. 8. Greco S., Schmidt M., Klauer K., Kirsch B., Aurich J.C. Hybrid manufacturing: influence of material properties during micro milling of different additively manufactured AISI 316L. Production Engineering, 2022. DOI: 10.1007/ s11740-022-01139-6. 9. Dilberoglu U.M., Gharehpapagh B., Yaman U. Current trends and research opportunities in hybrid additive manufacturing. The International Journal of Advanced Manufacturing Technology, 2021, vol. 113, pp. 623–648. DOI: 10.1007/s00170-021-06688-1. 10. Kim E.J., Lee C.M., Kim D.H. The effect of post-processing operations on mechanical characteristics of 304L stainless steel fabricated using laser additive manufacturing. Journal of Materials Research and Technology, 2021, vol. 15, pp. 1370–1381. DOI: 10.1016/j.jmrt.2021.08.142. 11. Szykiedans K., Credo W. Mechanical properties of FDM and SLA low-cost 3-D prints. Procedia Engineering, 2016, vol. 136, pp. 257–262. DOI: 10.1016/j.proeng.2016.01.207. 12. PolishettyA., Shunmugavel M., Goldberg M., Littlefair G., Singh R.K. Cutting force and surface finish analysis of machining additive manufactured titanium alloy Ti-6Al-4V. Procedia Manufacturing, 2017, vol. 7, pp. 284– 289. DOI: 10.1016/j.promfg.2016.12.071. 13. Oyelola O., Crawforth P., M’Saoubi R., Clare A.T. Machining of additively manufactured parts: implications for surface integrity. Procedia CIRP, 2016, vol. 45, pp. 119–122. DOI: 10.1016/j.procir.2016.02.066. 14. Manna A., Bhattacharayya B. A study on machinability of Al/SiC-MMC. Journal of Materials Processing Technology, 2003, vol. 140, pp. 711–716. DOI: 10.1016/S0924-0136(03)00905-1. 15. Muratov K.R., Gashev E.A., Ablyaz T.R., Panteleev A.A. Influence of cutting conditions on the surface roughness of titanium-alloy parts produced by additive and traditional methods. Russian Engineering Research, 2021, vol. 41, iss. 5, pp. 434–436. DOI: 10.3103/S1068798X21050129. 16. Souflas T., Bikas H., Ghassempouri M., Salmi A., Atzeni E., Saboori A., Brugnetti I., Valente A., Mazzucato F., Stavropoulos P. A comparative study of dry and cryogenic milling for Directed Energy Deposited IN718 components: effect on process and part quality. The International Journal of Advanced Manufacturing Technology, 2022, vol. 119, pp. 745–758. DOI: 10.1007/s00170-021-08313-7. 17. Danish M., Aslantas K., Hascelik A., Rubaiee S., Gupta M.K., Yildirim M.B., Ahmed A., Mahfous A. An experimental investigations on effects of cooling/lubrication conditions in micro milling of additively manufactured Inconel 718. Tribology International, 2022, vol. 173. DOI: 10.1016/j.triboint.2022.107620. 18. Zhang R., Nagaraja K.M., Bian N., Fisher E., Ahmadyar S., Bayazitoglu K., Lu H., Li Wei. Experimental studies on fabricating functionally gradient material of stainless steel 316L-Inconel 718 through hybrid manufacturing: directed energy deposition and machining. The International Journal of Advanced Manufacturing Technology, 2022, vol. 120, pp. 7815–7826. DOI: 10.1007/s00170-022-09304-y.
RkJQdWJsaXNoZXIy MTk0ODM1