OBRABOTKAMETALLOV Vol. 24 No. 4 2022 30 TECHNOLOGY References 1. Voroshnin L.G., Mendeleeva O.L., Smetkin V.A. Teoriya i tekhnologiya khimiko-termicheskoi obrabotki [Theory and technology of chemical and heat treatment]. Moscow, Novoe znanie Publ., 2010. 304 p. ISBN 978-594735-149-1. The features of residual stresses investigation in the hardened surface layer of die steels after diffusion boroaluminizing Nikolay Ulakhanov 1, 2, a,*, Aleksandr Tikhonov 3, b, Undrakh Mishigdorzhiyn 1, c, Vladimir Ivancivsky 4, d, Nikita Vakhrushev 4, e 1 Institute of Physical Material Science of the Siberian Branch of the RAS, 6 Sakhyanovoy str., Ulan-Ude, 670047, Russian Federation 2 East Siberia State University of Technology and Management, 40V Kluchevskaya str, Ulan-Ude, 670013, Russian Federation 3 Irkutsk National Research Technical University, 83 Lermontov str., Irkutsk, 664074, Russian Federation 4 Novosibirsk State Technical University, 20 Prospekt K. Marksa, Novosibirsk, 630073, Russian Federation a https://orcid.org/0000-0002-0635-4577, nulahanov@mail.ru, b https://orcid.org/0000-0002-4917-9916, tihonovalex90@mail.ru, с https://orcid.org/0000-0002-7863-9045, undrakh@ipms.bscnet.ru, d https://orcid.org/0000-0001-9244-225X, ivancivskij@corp.nstu.ru, e https://orcid.org/0000-0002-2273-5329, vah_nikit@mail.ru Obrabotka metallov - Metal Working and Material Science Journal homepage: http://journals.nstu.ru/obrabotka_metallov Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science. 2022 vol. 24 no. 4 pp. 18–32 ISSN: 1994-6309 (print) / 2541-819X (online) DOI: 10.17212/1994-6309-2022-24.4-18-32 ART I CLE I NFO Article history: Received: 28 September 2022 Revised: 14 October 2022 Accepted: 03 November 2022 Available online: 15 December 2022 Keywords: Thermal-Chemical Treatment (TCT) Boroaluminizing Residual Stresses Die steel Funding The research was supported by a grant from the Russian Science Foundation (project 19-79-10163-P). Acknowledgements Research were partially conducted at core facility “Structure, mechanical and physical properties of materials”. ABSTRACT Introduction. Diffusion boroaluminizing provides improved performance properties of the die steels’ surface such as wear resistance, high hardness, and corrosion resistance. Surface hardening can signifi cantly contribute to the occurrence of technological residual stresses (TRS) on the surface. Currently, there are no studies on the topic of the stress state of diffusion boroaluminizing. The purpose of this work is to develop a method for determining the TRS and a nature of its distribution in the diffusion layers on the surface of 5CrNiMo and 3Cr2W8V die steels after boroaluminizing by a mechanical method. The paper considers the results of experimental studies on the determination of the normal components of TRS by the mechanical method in diffusion layers of die steels. The conducted studies showed that the formation of unfavorable tensile TRS occurs along the depth of the hardened layer in the case of the investigated TCT method and types of steels. Results and discussions. The main approaches for determining the TRS in the surface layer of 3Cr2W8V and 5CrNiMo die steels after TCT are considered. Problems in the determination of TRS by the mechanical method on the UDINON-2 unit are identifi ed, and its solution is proposed. The effi ciency of using the anodic dissolution method for the continuous removal of stressed layers during the TRS study by the mechanical method on the UDION-2 unit is shown. The optimal electrolyte composition is selected for the process of anodic dissolution consisting of: NaNO3 – 60 g/l; NaNO2 – 5 g/l; Na2CO3 – 5 g/l; C3H8O3 – 15 g/l; H2O – the rest. The distributions of the normal TRS components in the diffusion layer of die steel specimens are revealed. It is established that, during the TCT of these steels predominantly tensile TRS are formed in the surface layer. Further research will be aimed at developing measures to reduce tensile TRS during diffusion boroaluminizing of die steels. For citation: Ulakhanov N.S., Tikhonov A.G., Mishigdorzhiyn U.L., Ivancivsky V.V., Vakhrushev N.V. The features of residual stresses investigation in the hardened surface layer of die steels after diffusion boroaluminizing. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2022, vol. 24, no. 4, pp. 18–32. DOI: 10.17212/1994-6309-2022-24.4-18-32. (In Russian). ______ * Corresponding author Ulakhanov Nikolay S., Junior researcher Institute of Physical Material Science of the Siberian Branch of the RAS, 6 Sakhyanovoy str., 670047, Ulan-Ude, Russian Federation Tel.: 8 (3012) 43-48-70, e-mail: nulahanov@mail.ru
RkJQdWJsaXNoZXIy MTk0ODM1