OBRABOTKAMETALLOV technology Vol. 25 No. 1 2023 20. Gimadeev M.R., Stelmakov V.A., Gusliakov V.V. Cutting forces and roughness during ball end milling of inclined surfaces. Proceedings of the 6th International Conference on Industrial Engineering.. Cham, Springer, 2021, vol. 2, pp. 926–937. DOI: 10.1007/978-3-030-54817-9_107. 21. Kushcheva M.E., Klauch D.N., Kobelev O.A. Printsipy vybora smazochno-okhlazhdayushchikh tekhnologicheskikh sred dlya obrabotki metallov rezaniem [Principles of selection of cutting technological mediums for metal cutting]. Izvestiya MGTU «MAMI», 2014, vol. 2, no. 1 (19), pp. 73–76. (In Russian). 22. Levin E.K., AlDhaibani A.M. Analiz vozmozhnostei podavleniya vliyaniya chastotnoi kharakteristiki kanala svyazi na parametry rechevogo signala [Suppression opportunities analysis of the communication link frequency response influence on the voice signal parameters]. Proektirovanie i tekhnologiya elektronnykh sredstv = Design and Technology of Electronic Means, 2018, no. 3, pp. 14–18. 23. Ponomarev B.B., Nguen S.H. Vliyanie orientatsii instrumenta na sily rezaniya pri kontsevom frezerovanii [The influence of tool orientation on cutting forces during end milling]. Izvestiya vysshikh uchebnykh zavedenii. Mashinostroenie = BMSTU Journal of Mechanical Engineering, 2019, no. 3 (708), pp. 11–20. DOI: 10.18698/05361044-2019-3-11-20. 24. Gimadeev M.R., Davydov V.M., Nikitenko A.V., Sarygin A.V. Formirovanie parametrov sherokhovatosti na osnove korrelyatsionnykh svyazei pri chistovom frezerovanii prostranstvenno-slozhnykh poverkhnostei [Formation of roughness parameters based on correlation relations during fi nishing milling of spatially complex surfaces]. Uprochnyayushchie tekhnologii i pokrytiya = Strengthening Technologies and Coatings, 2019, vol. 15, no. 6 (174), pp. 243–248. 25. Gimadeev M.R., Davydov V.M. Korrelyatsionnye svyazi pokazatelei sherokhovatosti pri frezerovanii sfericheskim instrumentom [Correlation of the roughness parameters in milling of spherical tool]. Sborka v mashinostroenii, priborostroenii = Assembling in Mechanical Engineering, Instrument-Making, 2019, no. 5, pp. 219–224. Conflicts of Interest The authors declare no conflict of interest. 2023 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
RkJQdWJsaXNoZXIy MTk0ODM1