Diffusion coatings formation features, obtained by complex chemical-thermal treatment on the structural steels

OBRABOTKAMETALLOV Vol. 25 No. 1 2023 109 MATERIAL SCIENCE 4. Singh V., Singla A.K., Bansal A. Impact of HVOF sprayed Vanadium Carbide (VC) based novel coatings on slurry erosion behaviour of hydro-machinery SS316 steel. Tribology International, 2022, vol. 176, p. 107874. DOI: 10.1016/j.triboint.2022.107874. 5. Yang K., Chen C., Xu G., Jiang Z., Zhang S., Liu X. HVOF sprayed Ni–Mo coatings improved by annealing treatment: microstructure characterization, corrosion resistance to HCl and corrosion mechanisms. Journal of Materials Research and Technology, 2022, vol. 19, pp. 1906–1921. DOI: 10.1016/j.jmrt.2022.05.181. 6. Liang J., Liu Y., Yang S., Yin X., Chen S., Liu C. Microstructure and wear resistance of laser cladding Ti-Al-Ni-Si composite coatings. Surface and Coatings Technology, 2022, vol. 445, p. 128727. DOI: 10.1016/j.surfcoat.2022.128727. 7. Dervishi E., McBride M., Edwards R., Gutierrez M., Li N., Buntyn R., Hooks D.E. Mechanical and tribological properties of anodic Al coatings as a function of anodizing conditions. Surface and Coatings Technology, 2022, vol. 444, p. 128652. DOI: 10.1016/j.surfcoat.2022.128652. 8. Bathini L., Prasad M.J.N.V., Wasekar N.P. Development of continuous compositional gradient Ni-W coatings utilizing electrodeposition for superior wear resistance under sliding contact. Surface and Coatings Technology, 2022, vol. 445, p. 128728. DOI: 10.1016/j.surfcoat.2022.128728. 9. ZhangM., Shi X., Li Z., XuH. Enhanced corrosion andwear resistance of gradient graphene-CrCnanocomposite coating on stainless steel. Carbon, 2021, vol. 174, pp. 693–709. DOI: 10.1016/j.carbon.2020.12.007. 10. Keunecke M., Bewilogua K., Becker J., Gies A., Grischke M. CrC/a-C:H coatings for highly loaded, low friction applications under formulated oil lubrication. Surface and Coatings Technology, 2012, vol. 207, pp. 270– 278. DOI: 10.1016/j.surfcoat.2012.06.085. 11. Wang D., Lin S.-s., Yang Z., Yin Z.-f., Ye F.-x., Gao X.-y., Qiao Y.-p., Xue Y.-n., Yang H.-z., Zhou K.-s. Failure mechanisms of CrN and CrAlN coatings for solid particle erosion resistance // Vacuum. – 2022. – Vol. 204. – P. 111313. – DOI: 10.1016/j.vacuum.2022.111313. 12. Ji C., Guo Q., Li J., Guo Y., Yang Z., Yang W., Xu D., Yang B. Microstructure and properties of CrN coating via multi-arc ion plating on the valve seat material surface. Journal of Alloys and Compounds, 2022, vol. 891, p. 161966. DOI: 10.1016/j.jallcom.2021.161966. 13. Li Q., Song P., Zhang R., Li Z., Wang Y., Du P., Lu J. Oxidation behavior and Cr-Zr diffusion of Cr coatings prepared by atmospheric plasma spraying on zircaloy-4 cladding in steam at 1300 C. Corrosion Science, 2022, vol. 203, p. 110378. DOI: 10.1016/j.corsci.2022.110378. 14. Sahu J.N., C S. Development of hard and wear resistant surface coating on Ni-Cr-Mo steel by surface mechano-chemical carburization treatment (SMCT). Journal of Materials Processing Technology, 2019, vol. 263, pp. 285–295. DOI: 10.1016/j.jmatprotec.2018.08.027. 15. Nurakov S., Belotserkovsky M., Suleimenov T., Aitlessov K. Application of chemical-thermal treatment for hardening of sprayed with supersonic coatings. Procedia Computer Science, 2019, vol. 149, pp. 360–364. DOI: 10.1016/j.procs.2019.01.149. 16. Lakhtin Yu.M., Arzamasov B.N. Khimiko-termicheskaya obrabotka metallov [Chemical heat treatment of metals]. Moscow, Metallurgiya Publ., 1985. 256 p. 17. Meißner T.M., Oskay C., Bonk A., Grégoire B., Donchev A., Solimani A., Galetz M.C. Improving the corrosion resistance of ferritic-martensitic steels at 600 °C in molten solar salt via diffusion coatings. Solar Energy Materials and Solar Cells, 2021, vol. 227, p. 111105. DOI: 10.1016/j.solmat.2021.111105. 18. SokolovA.G., Bobylyov E.E. Povyshenie iznosostoikosti izdelii iz austenitnykh stalei putem sovmeshcheniya tekhnologii tsementatsii i diffuzionnogo legirovaniya v srede legkoplavkikh zhidkometallicheskikh rasplavov [Increase of durability of austenitic steel by overlap of carburization and diffusion saturation from liquid metal medium solutions technologies]. Journal of Siberian Federal University. Engineering and Technologies, 2020, vol. 13 (4), pp. 502–511. DOI: 10.17516/1999-494X-0241. 19. Sokolov A.G., Bobylyov E.E., Storogenko I.D., Popov R.A. Mechanism and properties diffusion coating formation at carbide forming element base on surface of steel products. AIP Conference Proceedings, 2021, vol. 2389, p. 080001. DOI: 10.1063/5.0063579. 20. Sokolov A.G., Bobylev E.E., Popov R.A. Sposob formirovaniya iznosostoikogo pokrytiya i korrozionnostoikogo pokrytiya na poverkhnosti izdelii iz stali [Method of forming a wear-resistant coating and a corrosionresistant coating on the surface of steel products]. Patent RF, no. 2768647, 2022. Confl icts of Interest The authors declare no confl ict of interest.  2023 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).

RkJQdWJsaXNoZXIy MTk0ODM1