OBRABOTKAMETALLOV Vol. 25 No. 1 2023 148 MATERIAL SCIENCE 19. BartkowskaA., Bartkowski D., Przestacki D., Hajkowski J., Miklaszewski A. Microstructural and mechanical properties of B-Cr coatings formed on 145Cr6 tool steel by laser remelting of diffusion borochromized layer using diode laser. Coatings, 2021, vol. 11, p. 608. DOI: 10.3390/coatings11050608. 20. Bartkowska A., Pertek A., Kulka M., Klimek L. Laser surface modifi cation of boronickelized medium carbon steel. Optics and Laser Technology, 2015, vol. 74, pp. 145–157. DOI: 10.1016/j.optlastec.2015.05.014. 21. Lysykh S.A., Kharaev Yu.P., Kornopoltsev V.N., Butukhanov V.A. Issledovanie formirovaniya diffuzionnykh sloev na stali 20 pri odnovremennom nasyshchenii borom i med’yu [The study of formation of diffusion layers on steel 20 with the simultaneous saturation with boron and copper]. Sovremennye naukoemkie tekhnologii = Modern high technologies, 2018, no. 9, pp. 56–60. 22. Lysykh S.A., Kharaev Yu.P., Kornopoltsev V.N., Zhong H.X., Lygdenov B.D., Guryev A.M. Formirovanie diffuzionnykh sloev i issledovanie sherokhovatosti pri kompleksnom nasyshchenii poverkhnosti stali 5KhNM borom i med’yu [Formation of diffusion layers and investigation of roughness at complex saturation of the steel surface with 5KhNM boron and copper]. Polzunovskii vestnik = Polzunov Bulletin, 2020, no. 3, pp. 77–82. DOI: 10.25712/ ASTU.2072-8921.2020.03.013. 23. Kharaev Yu.P., Kornopoltsev V.N., Lysyh S.A. Opredelenie sostava smesi pri poverkhnostnom uprochnenii stali borom i med’yu [Identifi cation of a mixture of surface hardening steel with boron and copper]. Polzunovskii al’manakh = Polzunov Almanac, 2016, no. 4, pp. 142–144. 24. Ulakhanov N.S., Mishigdorzhiyn U.L., Tikhonov A.G., Shustov A.I., Pyatykh A.S. Modifi katsiya poverkhnostnogo sloya shtampovykh stalei sozdaniem B-Al-sloev khimiko-termicheskoi obrabotkoi [Surface modifi cation of die steels withB-Al-layers by thermal-chemical treatment]. Uprochnyayushchie tekhnologii i pokrytiya = Strengthening Technologies and Coatings, 2021, vol. 17, no. 12 (204), pp. 557–564. DOI: 10.36652/1813-13362021-17-12-557-564. 25. Pyatykh A., Savilov A., Timofeev S. Investigation of hadfi eld steel machinability in milling operations. Key Engineering Materials, 2022, vol. 910, pp. 123–128. DOI: 10.4028/p-8p4ud2. 26. Lakhtin Yu.M., Arzamasov B.N. Khimiko-termicheskaya obrabotka metallov [Chemical-thermal treatment of metals]. Moscow, Metallurgiya Publ., 1985. 256 p. 27. Labunets V.F., Voroshnin L.G., Kindarchuk M.V. Iznosostoikie boridnye pokrytiya [Wear resistant boride coatings]. Kiev, Tekhnika Publ., 1989. 253 p. 28. Guzanov B.N., Kositsyn S.V., Pugacheva N.B. Uprochnyayushchie zashchitnye pokrytiya v mashinostroenii [Hardening protective coatings in mechanical engineering]. Ekaterinburg, UrORAN Publ., 2004. 244 p. ISBN 5-76911405-3. 29. Kaidash N.G., Chetverikova L.N. Struktura i svoistva boridosilitsidnykh pokrytii na zheleze i stali [Structure and properties of coatings borosilicide on iron and steel]. Vestnik Cherkasskogo natsional’nogo universiteta. Seriya: Fiziko-matematicheskie nauki = Cherkasy University Bulletin: Physical and Mathematical Sciences, 2007, no. 114, pp. 89–115. Confl icts of Interest The authors declare no confl ict of interest. 2023 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
RkJQdWJsaXNoZXIy MTk0ODM1