Predicting the coolant lubricating properties based on its density and wetting effect

OBRABOTKAMETALLOV Vol. 25 No. 2 2023 15 TECHNOLOGY 3. Anand R., Raina A., Irfan Ul Haq M., Mir M.J., Gulzar O., Wani M.F. Synergism of TiO2 and graphene as nano-additives in bio-based cutting fl uid – An experimental investigation. Tribology Transactions, 2021, vol. 64 (2), pp. 350–366. DOI: 10.1080/10402004.2020.1842953. 4. Öndin O., Kıvak T., Sarıkaya M., Yıldırım Ç.V. Investigation of the infl uence of MWCNTs mixed nanofl uid on the machinability characteristics of PH 13-8 Mo stainless steel. Tribology International, 2020, vol. 148, p. 106323. DOI: 10.1016/j.triboint.2020.106323. 5. Bhowmick S., Eskandari B., Khan M.Z.U., Alpas A.T. Investigation of the role of tribolayer formation in improving drilling performance of Ti-6Al-4V using minimum quantity of lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2021, vol. 235 (2), pp. 396–409. DOI: 10.1177/1350650120933420. 6. Rajmohan T., Hemanth Kumar D., Nivithetha R., Elamburthi, Kalyan Chakravarthy V.V. Synthesis and tribological characteristics of a nano CuO particle-fi lled water-based lubricants. IOP Conference Series: Materials Science and Engineering, 2020, vol. 954, p. 012045. DOI: 10.1088/1757-899X/954/1/012045. 7. Kumar Rakesh G., Suresh Kumar Reddy N. Tribological studies of EN31 steel and Ti-6Al-4V alloy materials using pin-on-disc tribometer. Materials Today: Proceedings, 2019, vol. 28 (2), pp. 1216–1220. DOI: 10.1016/j. matpr.2020.01.509. 8. Ferri C., Troise M., Lizarazo S., Iglesias P. Ionic liquids as additives to cutting fl uids to reduce machine tool friction and wear. ASME International Mechanical Engineering Congress and Exposition: Proceedings (IMECE), 2018, vol. 12, p. V012T11A046. DOI: 10.1115/IMECE2018-86810. 9. Ajay Vardhaman B.S., Amarnath M., Ramkumar J., Rai P.K. Experimental investigations to enhance the tribological performance of engine oil by using nano-boric acid and functionalized multiwalled carbon nanotubes: A comparative study to assess wear in bronze alloy. Journal of Materials Engineering and Performance, 2018, vol. 27 (6), pp. 2782–2795. DOI: 10.1007/s11665-018-3384-9. 10. Madej M., Kowalczyk J., Ozimina D., Milewski K. The tribological properties of titanium carbonitride TiCN coating lubricated with non-toxic cutting fl uid. Materials Research Proceedings, vol. 5, pp. 47–53. DOI: 10.21741/9781945291814-9. 11. Wu Z., Li S., Zhou F. Electrochemical and tribological properties of TiSiCN coatings in coolant. Materials Science-Medziagotyra, 2019, vol. 25 (2), pp. 159–165. DOI: 10.5755/j01.ms.25.2.19252. 12. Wu Z., Cheng Z., Zhang H., Xu Z., Wang Y., Zhou F. Electrochemical and tribological properties of CrAlN, TiAlN, and CrTiN coatings in water-based cutting fl uid. Journal of Materials Engineering and Performance, 2020, vol. 29 (4), pp. 2153–2163. DOI: 10.1007/s11665-020-04772-3. 13. Chhattal M., Tonggang L., Kun Y., Xin L.Ü., Guangsheng L. Development of a tribotester for investigation of ferrofl uids lubrication performance on the thrust pad bearing. Tribology Transactions, 2020, vol. 63 (6), pp. 1095– 1102. DOI: 10.1080/10402004.2020.1794092. 14. Michalec M., Svoboda P., Krupka I., Hartl M., Vencl A. Investigation of the tribological performance of ionic liquids in non-conformal EHL contacts under electric fi eld activation. Friction, 2020, vol. 8 (5), pp. 982–994. DOI: 10.1007/s40544-019-0342-y. 15. He J., Sun J., Meng Y., Yan X. Preliminary investigations on the tribological performance of hexagonal boron nitride nanofl uids as lubricant for steel/steel friction pairs. Surface Topography: Metrology and Properties, 2019, vol. 7 (1), p. 015022. DOI: 10.1088/2051-672X/ab0afb. 16. Zhao C., Chen Y.K., Ren G. A study of tribological properties of water-based ceria nanofl uids. Tribology and Lubrication Technology, 2017, vol. 73 (3), pp. 56–66. 17. Said Z., Gupta M., Hegab H., Arora N., KhanA.M., Jamil M., Bellos E. Acomprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fl uids. International Journal of Advanced Manufacturing Technology, 2019, vol. 105 (5–6), pp. 2057–2086. DOI: 10.1007/s00170-019-04382-x. 18. Madanchi N., Zellmer S., Winter M., Flach F., Garnweitner G., Herrmann C. Investigation on the eff ects of nanoparticles on cutting fl uid properties and tribological characteristics. International Journal of Precision Engineering and Manufacturing – Green Technology, 2019, vol. 6 (3), pp. 433–447. DOI: 10.1007/s40684-01900053-0. 19. CetinM.H., Korkmaz S. Investigation of the concentration rate and aggregation behaviour of nano-silver added colloidal suspensions on wear behaviour of metallic materials by using ANOVA method. Tribology International, 2020, vol. 147, p. 106273. DOI: 10.1016/j.triboint.2020.106273. 20. Bhaumik S., Paleu V., Pathak R., Maggirwar R., Katiyar J.K., Sharma A.K. Tribological investigation of r-GO additived biodegradable cashew nut shells liquid as an alternative industry lubricant. Tribology International, 2019, vol. 135, pp. 500–509. DOI: 10.1016/j.triboint.2019.03.007.

RkJQdWJsaXNoZXIy MTk0ODM1