OBRABOTKAMETALLOV technology Vol. 25 No. 2 2023 2. Joseph Babu K., Prabhakaran Nair K., Joy M.L. Development of cutting fluid from transesterified coconut oil and evaluation of its tribological properties. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2019, vol. 233 (3), pp. 369–379. DOI: 10.1177/1350650118785467. 3. Anand R., Raina A., Irfan Ul Haq M., Mir M.J., Gulzar O., Wani M.F. Synergism of TiO2 and graphene as nano-additives in bio-based cutting fluid – An experimental investigation. Tribology Transactions, 2021, vol. 64 (2), pp. 350–366. DOI: 10.1080/10402004.2020.1842953. 4. Öndin O., Kıvak T., Sarıkaya M., Yıldırım Ç.V. Investigation of the influence of MWCNTs mixed nanofluid on the machinability characteristics of PH 13-8 Mo stainless steel. Tribology International, 2020, vol. 148, p. 106323. DOI: 10.1016/j.triboint.2020.106323. 5. Bhowmick S., Eskandari B., Khan M.Z.U., Alpas A.T. Investigation of the role of tribolayer formation in improving drilling performance of Ti-6Al-4V using minimum quantity of lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2021, vol. 235 (2), pp. 396–409. DOI: 10.1177/1350650120933420. 6. Rajmohan T., Hemanth Kumar D., Nivithetha R., Elamburthi, Kalyan Chakravarthy V.V. Synthesis and tribological characteristics of a nano CuO particle-filled water-based lubricants. IOP Conference Series: Materials Science and Engineering, 2020, vol. 954, p. 012045. DOI: 10.1088/1757-899X/954/1/012045. 7. Kumar Rakesh G., Suresh Kumar Reddy N. Tribological studies of EN31 steel and Ti-6Al-4V alloy materials using pin-on-disc tribometer. Materials Today: Proceedings, 2019, vol. 28 (2), pp. 1216–1220. DOI: 10.1016/j. matpr.2020.01.509. 8. Ferri C., Troise M., Lizarazo S., Iglesias P. Ionic liquids as additives to cutting fluids to reduce machine tool friction and wear. ASME International Mechanical Engineering Congress and Exposition: Proceedings (IMECE), 2018, vol. 12, p. V012T11A046. DOI: 10.1115/IMECE2018-86810. 9. Ajay Vardhaman B.S., Amarnath M., Ramkumar J., Rai P.K. Experimental investigations to enhance the tribological performance of engine oil by using nano-boric acid and functionalized multiwalled carbon nanotubes: A comparative study to assess wear in bronze alloy. Journal of Materials Engineering and Performance, 2018, vol. 27 (6), pp. 2782–2795. DOI: 10.1007/s11665-018-3384-9. 10. Madej M., Kowalczyk J., Ozimina D., Milewski K. The tribological properties of titanium carbonitride TiCN coating lubricated with non-toxic cutting fluid. Materials Research Proceedings, vol. 5, pp. 47–53. DOI: 10.21741/9781945291814-9. 11. Wu Z., Li S., Zhou F. Electrochemical and tribological properties of TiSiCN coatings in coolant. Materials Science-Medziagotyra, 2019, vol. 25 (2), pp. 159–165. DOI: 10.5755/j01.ms.25.2.19252. 12. Wu Z., Cheng Z., Zhang H., Xu Z., Wang Y., Zhou F. Electrochemical and tribological properties of CrAlN, TiAlN, and CrTiN coatings in water-based cutting fluid. Journal of Materials Engineering and Performance, 2020, vol. 29 (4), pp. 2153–2163. DOI: 10.1007/s11665-020-04772-3. 13. Chhattal M., Tonggang L., Kun Y., Xin L.Ü., Guangsheng L. Development of a tribotester for investigation of ferrofluids lubrication performance on the thrust pad bearing. Tribology Transactions, 2020, vol. 63 (6), pp. 1095– 1102. DOI: 10.1080/10402004.2020.1794092. 14. Michalec M., Svoboda P., Krupka I., Hartl M., Vencl A. Investigation of the tribological performance of ionic liquids in non-conformal EHL contacts under electric field activation. Friction, 2020, vol. 8 (5), pp. 982–994. DOI: 10.1007/s40544-019-0342-y. 15. He J., Sun J., Meng Y., Yan X. Preliminary investigations on the tribological performance of hexagonal boron nitride nanofluids as lubricant for steel/steel friction pairs. Surface Topography: Metrology and Properties, 2019, vol. 7 (1), p. 015022. DOI: 10.1088/2051-672X/ab0afb. 16. Zhao C., Chen Y.K., Ren G. A study of tribological properties of water-based ceria nanofluids. Tribology and Lubrication Technology, 2017, vol. 73 (3), pp. 56–66. 17. Said Z., Gupta M., Hegab H., Arora N., KhanA.M., Jamil M., Bellos E. Acomprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids. International Journal of Advanced Manufacturing Technology, 2019, vol. 105 (5–6), pp. 2057–2086. DOI: 10.1007/s00170-019-04382-x. 18. Madanchi N., Zellmer S., Winter M., Flach F., Garnweitner G., Herrmann C. Investigation on the effects of nanoparticles on cutting fluid properties and tribological characteristics. International Journal of Precision Engineering and Manufacturing – Green Technology, 2019, vol. 6 (3), pp. 433–447. DOI: 10.1007/s40684-01900053-0. 19. CetinM.H., Korkmaz S. Investigation of the concentration rate and aggregation behaviour of nano-silver added colloidal suspensions on wear behaviour of metallic materials by using ANOVA method. Tribology International, 2020, vol. 147, p. 106273. DOI: 10.1016/j.triboint.2020.106273.
RkJQdWJsaXNoZXIy MTk0ODM1