OBRABOTKAMETALLOV technology Vol. 25 No. 2 2023 of titanium sponge alloyed with hydrogen]. Izvestiya vysshikh uchebnykh zavedenii. Tsvetnaya metallurgiya = Izvestiya. Non-Ferrous Metallurgy, 2015, no. 2, pp. 52–57. DOI: 10.17073/0021-3438-2015-2-52-57. 24. Nesterenko A.V., Novozhonov V.I., Vichuzhanin D.I. Vliyanie deformatsionnoi obrabotki na svoistva i strukturu polufabrikatov, poluchennykh tverdofaznoi konsolidatsiei titanovoi gubki [Influence of deformation treatment on the properties and structure of semi-finished products by solid-phase consolidation of titanium sponge]. Izvestiya vysshikh uchebnykh zavedenii. Tsvetnaya metallurgiya = Izvestiya. Non-Ferrous Metallurgy, 2015, no. 4, pp. 42–47. DOI: 10.17073/0021-3438-2015-4-42-47. 25. Nesterenko A.V., Novozhonov V.I., Zalazinsky A.G. Effect of deformation processing on the properties and structure of titanium obtained by plastic deformation of hydrogen-alloyed titanium sponge. Diagnostics, Resource and Mechanics of materials and structures, 2015, iss. 3, pp. 98–108. DOI: 10.17804/2410-9908.2015.3.098-108. (In Russian). 26. Berezin I.M., Zalazinskij A.G. Press-forma dlya dvukhstoronnego pressovaniya poroshka [Mold for doublesided pressing of powder]. Patent RF, no. 2686436, 2019. 27. Mitin B.S., ed. Poroshkovaya metallurgiya i napylennye pokrytiya [Powder metallurgy and sprayed coatings]. Moscow, Metallurgiya Publ., 1987. 792 p. 28. Kolmogorov V.L. Napryazheniya. Deformatsii. Razrushenie [Stresses. Deformations. Destruction]. Moscow, Metallurgiya Publ., 1970. 229 p. 29. Druyanov B.A. Prikladnaya teoriya plastichnosti poristykh tel [Applied theory of plasticity of porous bodies]. Moscow, Mashinostroenie Publ., 1989. 165 p. 30. Zalazinsky A.G., Kolmykov V.L., Sokolov M.V. O fizicheskikh uravneniyakh poristogo materiala [On the physical equations of a porous material]. Izvestiya vuzov. Tsvetnaya Metallurgiya = Izvestiya. Non-Ferrous Metallurgy, 1997, no. 4, pp. 39–43. 31. Zalazinsky A.G. Plasticheskoe deformirovanie strukturno-neodnorodnykh materialov [Plastic deformation of structurally inhomogeneous materials]. Yekaterinburg, IES UB RAS Publ., 2000. 492 p. 32. Zalazinsky A.G., Polyakov A.P. Postroenie razryvnogo resheniya dlya protsessa vydavlivaniya plasticheski szhimaemogo tela [Construction of a discontinuous solution for the process of extrusion of a plastically compressible body]. Izvestiya vuzov. Mashinostroenie = BMSTU Journal of Mechanical Engineering, 2001, no. 4, pp. 43–53. 33. Gurson A.L. Continuum theory of ductile rupture by void nucleation and growth: Pt. I. Yield criteria and flow rules for porous ductile materials. Journal of Engineering Materials and Technology, 1977, vol. 99, pp. 2–15. 34. NagasekharA.V., Tick-HonY., Li S., SeowH.P. Effect of acute tool-angles on equal channel angular extrusion/ pressing. Materials Science and Engineering: A, 2005, vol. 410–411, pp. 269–272. DOI: 10.1016/j.msea.2005.08.043. 35. Li S., Bourke M.A.M., Beyerlein I.J., Alexander D.J., Clausen B. Finite element analysis of the plastic deformation zone and working load in equal channel angular extrusion. Materials Science and Engineering: A, 2004, vol. 382, iss. 1–2, pp. 217–236. DOI: 10.1016/j.msea.2004.04.067. Conflicts of Interest The authors declare no conflict of interest. 2023 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1